Yayınlar

Dergi Makaleleri

    2018

  • Zabihyana, R., Mergheim, J., Javili, A., Steinmann, P. (2018). "Aspects of computational homogenization in magneto-mechanics: boundary conditions, RVE size and microstructure composition", International Journal of Solids and Structures, v.130-131 p.105--121

  • Alijani, H., Çetin, B., Akkus, Y., Dursunkaya, Z. (2018). "Experimental thermal performance characterization of flat grooved heat pipes ", Heat Transfer Engineering (In press)

  • Yıldıran, İ.N., Temizer, İ., Çetin, B. (2018). "Homogenization in Hydrodynamic Lubrication: Microscopic Regimes and Re-Entrant Textures", Journal of Tribology, v. 140 p.011701(1-19)

  • 2017

  • Abidi, K., Yildiz, Y., Annaswamy, A.M. (2017). "Control of Uncertain Sampled-Data Systems: An Adaptive Posicast Control Approach", IEEE Transactions on Automatic Control, v.62(5) p.2597-2602

  • Çetin, B., Öner, S.D., Baranoğlu, B. (2017). "Modeling of dielectrophoretic particle motion: Point particle vs finite-sized particle", Electrophoresis, v.38 p.1407-1418

  • Yildiz, Y., Unel, M. D. A.E. (2017). "Nonlinear Hierarchical Control of a Quad-Tilt-Wing UAV: An Adaptive Control Approach", International Journal of Adaptive Control and Signal Processing (accepted)

  • Hussain, H., Yildiz, Y., Matsutani, M., Annaswamy, A.M., Lavretsky, E. (2017). "Computable Delay Margins for Adaptive Systems with State Variables Accessible", IEEE Transactions on Automatic Control (accepted)

  • Li, N., Oyler, D., Zhang, M., Yildiz, Y., Kolmanovsky, I., Girard, A. (2017). "Game-Theoretic Modeling of Driver and Vehicle Interactions for Verification and Validation of Autonomous Vehicle Control Systems", IEEE Transactions on Control Systems Technology (accepted)

  • Abdelwahab, T., Kalyoncu, E., Onur, T., Baykara, M.Z., Seker, U.O. (2017). "Genetically-Tunable Mechanical Properties of Bacterial Functional Amyloid Nanofibers", Langmuir, v.33 p.4337-4345

  • Akkuş, Y., Tarman, H.İ., Çetin, B., Dursunkaya, Z. (2017). "Two-dimensional computational modeling of thin film evaporation", Int. J. Thermal Sciences, v.121 p.237–248

  • Cole, K.D., Çetin, B. (2017). "Modeling of Joule heating and convective cooling in a thick-walled micro-tube", Int. J. Thermal Sciences, v.119 p.24-36

  • Waseem, A., Temizer, İ., Kato, J., Terada, K. (2017). "Micro-Texture Design and Optimization in Hydrodynamic Lubrication via Two-Scale Analysis", Structural and Multidisciplinary Optimization, v.56 p.227-248

  • Waseem, A., Guilleminot, J., Temizer, İ. (2017). "Stochastic Multiscale Analysis in Hydrodynamic Lubrication", International Journal for Numerical Methods in Engineering, v.112 p.1070-1093

  • Javili, A., Steinmann, P., Mosler, J. (2017). "Micro-to-macro transition accounting for general imperfect interfaces", Computer Methods in Applied Mechanics and Engineering, v.317 p.274-317

  • Javili, A., Saeb, S., Steinmann, P. (2017). "Aspects of implementing constant traction boundary conditions in computational homogenization via semi-Dirichlet boundary conditions", Computational Mechanics, v.59 p.21-35

  • Esmaeili, A., Steinmann, P., Javili, A. (2017). "Coupled thermally general imperfect and mechanically coherent energetic interfaces subject to in-plane degradation", Journal of Mechanics of Materials and Structures, v.12 p.289-312

  • Dortdivanlioglu, B., Javili, A., Linder, C. (2017). "Computational aspects of morphological instabilities using isogeometric analysis", Computer Methods in Applied Mechanics and Engineering, v.316 p.261-279

  • Esmaeili, A., Steinmann, P., Javili, A. (2017). "Non-coherent energetic interfaces accounting for degradation", Computational Mechanics, v.59 p.361-383

  • Oliaei, S., Karpat, Y. (2017). "Investigating the influence of friction conditions on finite element simulation of micro scale machining with the presence of built-up edge", The International Journal of Advanced Manufacturing Technology (in press)

  • Oliaei, S., Karpat, Y. (2017). "Built-up edge effects on process outputs of titanium alloy micro milling", Precision Engineering (in press)

  • Alan, A., Yildiz, Y., Poyraz, U. (2017). "Adaptive Pressure Control for Use in Variable Thrust Rocket Development", under review.

  • Alijani, H., Çetin, B., Akkus, Y., Dursunkaya, Z. (2017). "Effect of design and operating parameters on the thermal Performance of flat grooved heat pipes", (Under Review)

  • Biancofiore, L., Brandt, L., Zaki, T.A. (2017). "Streak instability in viscoelastic Couette flow", Physical Review Fluids, v.2 p.043304

  • Yücelen, T., Yildiz, Y., Sipahi, R., Yousefi, E., Nguyen, N. (2017). "Stability Limit of Human-in-the-Loop Model Reference Adaptive Control Architectures", International Journal of Control (accepted)

  • Chatzigeorgiou, G., Meraghni, F., Javili, A. (2017). "Generalized interfacial energy and size effects in composites", Journal of the Mechanics and Physics of Solids, v.106 p.257-282

  • Ye, Z., Balkancı, A., Martini, A., Baykara, M.Z. (2017). "Effect of Roughness on the Layer-Dependent Friction of Few-Layer Graphene", Physical Review B, v.96 p.115401

  • Özoğul, A., İpek, S., Durgun, E., Baykara, M.Z. (2017). "Structural Superlubricity of Platinum on Graphite under Ambient Conditions: The Effects of Chemistry and Geometry", Applied Physics Letters (in press)

  • Düven, G., Çetin, B., Kışla, D. (2017). "Çip-üstü-laboratuvar teknolojisinin gıda mikrobiyolojisindeki uygulamaları (Lab-on-a-chip technology in food microbiology)", Akademik Gıda (Academic Food) (In press)

  • Afsharimani, N., Uluutku, B., Saygin, V., Baykara, M.Z. (2017). "Self-Assembled Molecular Films of Alkanethiols on Graphene for Heavy Metal Sensing", (submitted)

  • Esmaeili, A., Javili, A., Steinmann, P. (2017). "Highly-conductive energetic coherent interfaces subject to in-plane degradation", Mathematics and Mechanics of Solids, v.22(8) p.1696-1716

  • Cole, K., Çetin, B., Demirel, Y. (2017). "Semi-analytical source method for reaction-diffusion problem", J. Heat Transfer (In press)

  • Oskay, Y., Çetin, B., Şerifoğlu, N., Arslan Ergül, A., Adams, M. (2017). "A novel, low-cost injection and anesthesia system for zebrafish researchers", (In press)

  • 2016

  • Dokuyucu, H.I., Çakmakcı, M. (2016). "Concurrent Design of Energy Management and Vehicle Traction Supervisory Control Algorithms for Parallel Hybrid Electric Vehicles", IEEE Transactions on Vehicular Technology, v.65(2)

  • Gecer-Ulu, N., Ulu, E., Çakmakcı, M. (2016). "Design and Analysis of A Modular Learning Based Cross-Coupled Control Algorithm for Multi-Axis Precision Positioning Systems", International Journal of Control Automation and Systems, v.14(1)

  • Demirbaş, T., Baykara, M.Z. (2016). "Nanoscale Tribology of Graphene Grown by Chemical Vapor Deposition and Transferred onto Silicon Oxide Substrates", Journal of Materials Research, v.31 p.1914-1923

  • Yavuz, C., Oliaei, S.N., Çetin, B., Yeşil-Çeliktaş, Ö. (2016). "Sterilization of PMMA microfluidic chips by various techniques and investigation of material characteristics", J. Supercrticial Fluids, v.107 p.114–121

  • Temizer, İ., Stupkiewicz, S. (2016). "Formulation of the Reynolds Equation on a Time-Dependent Lubrication Surface", Proceedings of the Royal Society A, v.472 p.20160032

  • Temizer, İ., Hesch, C. (2016). "Hierarchical NURBS in Frictionless Contact", Computer Methods in Applied Mechanics and Engineering, v.299 p.161-186

  • Çetin, B., Özer, M.B., Çağatay, E., Büyükkoçak, S. (2016). "An integrated acoustic and dielectrophoretic particle manipulation in a microfluidic device for particle wash and separation fabricated by mechanical machining", Biomicrofluidics, v.10 p.014112

  • Waseem, A., Temizer, İ., Kato, J., Terada, K. (2016). "Homogenization-Based Design of Surface Textures in Hydrodynamic Lubrication", International Journal for Numerical Methods in Engineering, v.108 p.1427-1450

  • Kerse, C., Kalaycıoğlu, H., Elahi, P., Yavaş, S., Kesim, D., Akçaalan, Ö., Öktem, B., Çetin, B., Aşık, M., Hoogland, H., Holzwarth, R., İlday, F.Ö. (2016). "Ablation-cooled material removal with ultrafast bursts of pulses", Nature, v.537 p.84-88

  • Baykara, M.Z., Mönig, H., Schwendemann, T., Ünverdi, Ö., Altman, E., Schwarz, U. (2016). "Three-Dimensional Interaction Force and Tunneling Current Spectroscopy of Point Defects on Rutile TiO2(110)", Applied Physics Letters, v.108 p.071601

  • Abidi, K., Yildiz, Y., Korpe, B.E. (2016). "Explicit Time Delay Compensation in Teleoperation: An Adaptive Control Approach", International Journal of Robust and Nonlinear Control (in press)

  • Hesch, C., Franke, M., Dittmann, M., Temizer, İ. (2016). "Hierarchical NURBS and a higher-order phase-field approach to fracture for finite-deformation contact problems", Computer Methods in Applied Mechanics and Engineering, v.301 p.242-258

  • Temizer, İ. (2016). "Sliding Friction Across the Scales: Thermomechanical Interactions and Dissipation Partitioning", Journal of the Mechanics and Physics of Solids, v.89 p.126-148

  • A. Carcaterra and A. Akay, (2016). "Fluctuation-dissipation and energy properties of a finite bath ", Physical Review E, v.93 p.032142

  • Musavi, N., Onural, D., Gunes, K., Yildiz, Y. (2016). "Unmanned Aircraft Systems Airspace Integration: A Game Theoretical Framework for Concept Evaluations", AIAA Journal of Guidance, Control and Dynamics, v.40(1) p.96-109

  • Cihan, E., İpek, S., Durgun, E., Baykara, M.Z. (2016). "Structural Lubricity under Ambient Conditions", Nature Communications, v.7 p.12055

  • Baykara, M.Z., Schwarz, U. (2016). "Noncontact Atomic Force Microscopy III (Editorial)", Beilstein Journal of Nanotechnology, v.7 p.946-947

  • Karpat, Y., Oliaei, S.N. (2016). "Investigating the influence of built-up edge on forces and surface roughness in micro scale orthogonal machining of titanium alloy Ti6Al4V", Journal of Materials Processing Technology, v.235 p.28-40

  • Karpat, Y., Oliaei, S.N. (2016). "Influence of tool wear on machining forces and tool deflections during micro milling", The International Journal of Advanced Manufacturing Technology, v.84 p.1963-1980

  • Kılıç, K.İ., Temizer, İ. (2016). "Tuning Macroscopic Sliding Friction at Soft Contact Interfaces: Interaction of Bulk and Surface Heterogeneities", Tribology International, v.104 p.83-97

  • Gottschalk, D., McBride, A., Reddy, B., Javili, A., Wriggers, P., Hirschberger, C. (2016). "Computational and theoretical aspects of a grain-boundary model that accounts for grain misorientation and grain-boundary orientation", Computational Material Science, v.111 p.443-459

  • Lejeune, E., Javili, A., Linder, C. (2016). "Understanding geometric instabilities in thin films via a multi-layer model", Soft Matter, v.12 p.806

  • McBride, A., Gottschalk, D., Reddy, B., Wriggers, P., Javili, A. (2016). "Computational and theoretical aspects of a grain-boundary model at finite deformations", Technische Mechanik, v.36 p.92-109

  • Lejeune, E., Javili, A., Linder, C. (2016). "An algorithmic approach to multi-layer wrinkling", Extreme Mechanics Letters, v.7 p.10-17

  • Eskandari, M., Javili, A., Kuhl, E. (2016). "Elastosis during airway wall remodeling explains multiple co-existing instability patterns", Journal of Theoretical Biology, v.403 p.209-218

  • Esmaeili, A., Javili, A., Steinmann, P. (2016). "A thermo-mechanical cohesive zone model accounting for mechanically energetic Kapitza interfaces", International Journal of Solids and Structures, v.92-93 p.29-44

  • Lejeune, E., Javili, A., Weickenmeier, J., Kuhl, E., Linder, C. (2016). "Tri-layer wrinkling as a mechanism for anchoring center initiation in the developing cerebellum", Soft Matter, v.12 p.5613

  • Saeb, S., Steinmann, P., Javili, A. (2016). "Aspects of computational homogenization at finite deformations. A unifying review from Reuss' to Voigt's bound", Applied Mechanics Reviews, v.68 p.050801

  • Esmaeili, A., Javili, A., Steinmann, P. (2016). "Coherent energetic interfaces accounting for in-plane degradation", International Journal of Fracture, v.202 p.135-165

  • 2015

  • Hanay, S., Kelber, S.I., O'Connell, C.D., Mulvaney, P., Sader, J.E., Roukes, M.L. (2015). "Inertial Imaging with Nanomechanical Systems", Nature Nanotechnology

  • Nyffeler, C., Hanay, S., Sacchetto, D., Leblebici, Y. (2015). "Graphene field effect devices operating in differential circuit configuration", Microelectronic Engineering

  • Eric Sage,, Ariel Brenac,, Thomas Alava,, Robert Morel,, Cecilia Dupre,, Selim Hanay,, Michael L. Roukes,, Laurent Duraffourg,, Christophe Masselon,, Sébastien Hentz, (2015). "Neutral particle mass spectrometry with nanomechanical systems", Nature Communications, v.6(6482)

  • Barışık, M., Yazıcıoğlu, A.G., Çetin, B., Kakaç, S. (2015). "Analytical solution of thermally developing microtube heat transfer including axial conduction", Int. Comm. Heat and Mass Transfer, v.67 p.81-88

  • Cihan, E., Özoğul, A., Baykara, M.Z. (2015). "Structure and Nanotribology of Thermally Deposited Gold Nanoparticles on Graphite", Applied Surface Science, v.354 p.429-436

  • Karakaya, Z., Baranoğlu, B., Çetin, B., Yazıcı, A. (2015). "A parallel boundary element formulation for tracking multiple particle trajectories in Stoke's flow for microfluidic applications", CMES-Computer Modeling in Engineering and Science, v.104(3) p.227-249

  • Özkan, A., Erdem, Y. (2015). "Numerical analysis of mixing performance in sinusoidal microchannels based on particle motion in droplets", Microfluidics and Nanofluidics

  • Acosta, D.M., Yildiz, Y., Craun, R.W., Beard, S.D., Leonard, M.W., Hardy, G.H., Weinstein, M. (2015). "Motion-Based Piloted Simulation Evaluation of a Control Allocation Technique to Recover from Pilot Induced Oscillations", AIAA Journal of Aircraft, v.52(1) p.130-140

  • Kabacaoğlu, G., Temizer, İ. (2015). "Homogenization of Soft Interfaces in Time-Dependent Hydrodynamic Lubrication", Computational Mechanics, v.56 p.421-441

  • Altman, E., Baykara, M.Z., Schwarz, U. (2015). "Noncontact Atomic Force Microscopy: An Emerging Tool for Fundamental Catalysis Research", Accounts of Chemical Research, v.48 p.2640-2648

  • Baykara, M.Z., Todorović, M., Mönig, H., Schwendemann, T., Rodrigo, L., Altman, E., Perez, R., Schwarz, U. (2015). "Simultaneous Measurement of Multiple Independent Atomic-Scale Interactions Using Scanning Probe Microscopy: Data Interpretation and the Effect of Cross-Talk", Journal of Physical Chemistry C, v.119 p.6670-6677

  • Zeinali, S., Çetin, B., Oliaei, S., Karpat, Y. (2015). "Fabrication of continuous flow microfluidics device with 3D electrode structures for high throughput DEP applications using mechanical machining", Electrophoresis, Special Issue on Dielectrophoresis, v.36(13) p.1432-1442

  • Çetin, B., Koska, K., Erdal, M. (2015). "Warpage Characterization of Microchannels Fabricated by Injection Molding", ASME J. Micro and Nano-Manufacturing, v.3(2) p.021005

  • Uluutku, B., Baykara, M.Z. (2015). "Artifacts Related to Tip Asymmetry in High-Resolution Atomic Force Microscopy and Scanning Tunneling Microscopy Measurements of Graphitic Surfaces", Journal of Vacuum Science & Technology B, v.33 p.031802

  • Karpat, Y., Bahtiyar, O. (2015). "Tool geometry based prediction of critical thrust force while drilling carbon fiber reinforced polymers", Advances in Manufacturing, v.3 p.300-308

  • Chatzigeorgiou, G., Javili, A., Steinmann, P. (2015). "Surface magneto-elasticity theory", Archives of Applied Mechanics, v.85 p.1265-1288

  • Javili, A., Dortdivanlioglu, B., Kuhl, E., Linder, C. (2015). "Computational aspects of growth-induced instabilities through eigenvalue analysis", Computational Mechanics, v.56 p.405-420

  • Chatzigeorgiou, G., Javili, A., Steinmann, P. (2015). "Multiscale modelling for composites with energetic interfaces at the micro- or nanoscale", Mathematics and Mechanics of Solids, v.20 p.1130-1145

  • Javili, A., Chatzigeorgiou, G., McBride, A., Steinmann, P., Linder, C. (2015). "Computational homogenization of nano-materials accounting for size effects via surface elasticity", GAMM Mitteilungen, v.38 p.285-312

  • Chatzigeorgiou, G., Javili, A., Steinmann, P. (2015). "Interface properties influence the effective dielectric constant of composites", Philosophical Magazine, v.95 p.3402-3412

  • L. Biancofiore, F.G. (2015). "Interaction between counterpropagating Rossby waves and capillary waves in planar shear flows", Physics of Fluids, v.27 p.044104

  • 2014

  • Karayaylalı, P., Baykara, M.Z. (2014). "Analysis of Amplitude Modulation Atomic Force Microscopy in Aqueous Salt Solutions", Applied Surface Science, v.318 p.137-141

  • Erva Ulu,, Nurcan Gecer-Ulu,, Çakmakcı, M. (2014). "Development and Validation of an Adaptive Method to Generate High-Resolution Quadrature Encoder Signals", Journal Dynamic Systems Measurement and Control, v.136(3) p.034503

  • Büyükkoçak, S., Özer, B., Çetin, B. (2014). "Numerical modeling of acoustophoretic particle separation for microfuildics", Microfluid Nanofluid, v.17(6) p.1025-1037

  • Dittmann, M., Franke, M., Temizer, İ., Hesch, C. (2014). "Isogeometric analysis and thermomechanical mortar contact problems", Computer Methods in Applied Mechanics and Engineering, v.274 p.192-212

  • Yildiz, Y., Brat, G., Agogino, A. (2014). "Predicting Pilot Behavior in Medium Scale Scenarios Using Game Theory and Reinforcement Learning", AIAA Journal of Guidance, Control and Dynamics, v.37(4) p.1335-1343

  • Temizer, İ. (2014). "Multiscale Thermomechanical Contact: Computational Homogenization with Isogeometric Analysis", International Journal for Numerical Methods in Engineering, v.97 p.582-607

  • Çetin, B., Zeinali, S. (2014). "Analysis of heat transfer for a low Peclet number microtube flow using second-order slip model: An extended-Graetz problem", J. Engineering Mathematics, v.89(1) p.13-25

  • Wu, T., Temizer, İ., Wriggers, P. (2014). "Multiscale Hydro-Thermo-Chemo-Mechanical Coupling: Application to Alkali-Silica Reaction", Computational Materials Science, v.84 p.381-395

  • Cole, K., Çetin, B., Brettmann, L. (2014). "Microchannel heat transfer with slip flow and wall effects", AIAA J. Thermophysics and Heat Transfer, v.28(3) p.455-462

  • Çetin, B., Aşık, M.D., Taze, S. (2014). "Design and fabrication of a microfluidic device for synthesis of chitosan nanoparticles", ASME J. Nanotechnology in Engineering and Medicine, v. 4(3) p.031004

  • Baykara, M.Z., Schwarz, U. (2014). "Noncontact Atomic Force Microscopy II (Editorial)", Beilstein Journal of Nanotechnology, v.5 p.289-290

  • Çetin, B., Özer, M.B., Solmaz, M.E. (2014). "Microfluidic bio-particle manipulation for biotechnology", Biochemical Engineering Journal, v.92 p.63-82

  • Temizer, İ., Abdalla, M., Gürdal, Z. (2014). "An Interior Point Method for Isogeometric Contact", Computer Methods in Applied Mechanics and Engineering, v.276 p.589-611

  • Karpat, Y., Değer, B., Bahtiyar, O. (2014). "Experimental Evaluation of Polycrystalline Diamond Tool Geometries while Drilling Carbon Fiber Reinforced Plastics", Journal of Advanced Manufacturing Technology, v.71/5 p.1295-1307

  • Karpat, Y., Değer, B., Bahtiyar, O., Kaftanoğlu, B. (2014). "A Mechanistic Approach to Investigate Drilling of UD-CFRP Laminates with PCD Drills", CIRP Annals – Manufacturing Technology, v.63

  • Oliaei, S., Özdemir, C., Karpat, Y. (2014). "Fabrication of Micro Ball End Mills Using Micro Electro Discharge Machining", Int. J. of Mechatronics and Manufacturing Systems

  • Temizer, İ. (2014). "Computational Homogenization of Soft Matter Friction: Isogeometric Framework and Elastic Boundary Layers", International Journal for Numerical Methods in Engineering, v.100 p.953-981

  • Roveri, N., Carcaterra, A., Akay, A. (2014). "Frequency intermittency and energy pumping by linear attachments", Journal of Sound and Vibration, v.333 p.4281-4294

  • Ucar, A., Copuroglu, M., Baykara, M.Z., Arikan, O., Suzer, S. (2014). "Tribological Interaction between Polytetrafluoroethylene and Silicon Oxide Surfaces", Journal of Chemical Physics, v.141 p.164702

  • Özcan, O., Wang, H., Taylor, J., Sitti, M. (2014). "STRIDE II: A Water Strider-Inspired Miniature Robot with Circular Footpads", International Journal of Advanced Robotic Systems, v.11 p.85

  • Baisch, A., Özcan, O., Goldberg, B., Ithier, D., Wood, R. (2014). "High Speed Locomotion for a Quadrupedal Microrobot", The International Journal of Robotics Research, v.33(8) p.1063-1082

  • Özcan, O., Hu, W., Sitti, M., Bain, J., Ricketts, D. (2014). "Investigation of Tip Current and Normal Force Measured Simultaneously During Local Oxidation of Titanium using Dual-Mode Scanning Probe Microscopy", Micro & Nano Letters, IET, v.9(5) p.332-336

  • Javili, A., Steinmann, P., Kuhl, E. (2014). "A novel strategy to identify the critical conditions for growth-induced instabilities", Journal of the Mechanical Behavior of Biomedical Materials, v.29 p.20-32

  • Chatzigeorgiou, G., Javili, A., Steinmann, P. (2014). "Surface electrostatics - theory and computations", Proceedings of the Royal Society A, v.470 p.20130628

  • Chatzigeorgiou, G., Javili, A., Steinmann, P. (2014). "Unified magnetomechanical homogenization framework with application to magnetorheological elastomers", Mathematics and Mechanics of Solids, v.19 p.194-212

  • Javili, A., Kaessmair, S., Steinmann, P. (2014). "General imperfect interfaces", Computer Methods in Applied Mechanics and Engineering, v.275 p.76-97

  • Kaessmair, S., Javili, A., Steinmann, P. (2014). "Thermomechanics of solids with general imperfect coherent interfaces", Archives of Applied Mechanics, v.84 p.1409-1426

  • Javili, A., McBride, A., Steinmann, P., Reddy, B. (2014). "A unified computational framework for bulk and surface elasticity theory: A curvilinear-coordinate-based finite element methodology", Computational Mechanics, v.54 p.745-762

  • L. Biancofiore, (2014). "Crossover between two-and three-dimensional turbulence in spatial mixing layers", Journal of Fluid Mechanics, v.745 p.164-179

  • L. Biancofiore, F.G. P.L. (2014). "Direct numerical simulations of two-phase immiscible wakes", Fluid Dynamics Research, v.46 p.041409

  • 2013

  • Temizer, İ., Wu, T., Wriggers, P. (2013). "On the Optimality of the Window Method in Computational Homogenization", International Journal of Engineering Science, v.64 p.66-73

  • Karpat, Y., Polat, N. (2013). "Mechanistic force modeling for milling of carbon fiber reinforced polymers with double helix tools", CIRP Annals- Manufacturing Technology, v.62 p.95-98

  • Backhaus, S., Bent, R., Bono, J., Lee, R., Tracey, B., Wolpert, D., Xie, D., Yildiz, Y. (2013). "Cyber-Physical Security: A Game Theory Model of Humans Interacting over Control Systems", IEEE Transactions on Smart Grid, v.4(4) p.2320-2327

  • Çetin, B. (2013). "Effect of thermal creep on heat transfer for a 2D microchannel flow: An analytical approach", ASME J. Heat Transfer, Special Issue on Microchannel Heat Transfer, v.135(10) p.101007

  • Wu, T., Temizer, İ., Wriggers, P. (2013). "Computational Thermal Homogenization of Concrete", Cement & Concrete Composites, v.35 p.59-70

  • Temizer, İ. (2013). "A Mixed Formulation of Mortar-Based Contact with Friction", Computer Methods in Applied Mechanics and Engineering, v.255 p.183-195

  • Baykara, M.Z., Todorović, M., Mönig, H., Schwendemann, T., Ünverdi, Ö., Rodrigo, L., Altman, E., Perez, R., Schwarz, U. (2013). "Atom-Specific Forces and Defect Identification on Surface-Oxidized Cu(100) with Combined 3D-AFM and STM Measurements", Physical Review B, v.87 p.155414

  • Uluutku, B., Baykara, M.Z. (2013). "Effect of Lateral Tip Stiffness on Atomic-Resolution Force Field Spectroscopy", Journal of Vacuum Science & Technology B, v.31 p.041801

  • Ritter, C., Baykara, M.Z., Stegemann, B., Heyde, M., Rademann, K., Schroers, J., Schwarz, U. (2013). "Nonuniform Friction-Area Dependency for Antimony Oxide Surfaces Sliding on Graphite", Physical Review B, v.88 p.045422

  • Mönig, H., Todorović, M., Baykara, M.Z., Schwendemann, T., Rodrigo, L., Altman, E., Perez, R., Schwarz, U. (2013). "Understanding Scanning Tunneling Microscopy Contrast Mechanisms on Metal Oxides: A Case Study", ACS Nano, v.7 p.10233-10244

  • Temizer, İ. (2013). "Granular Contact Interfaces with Non-Circular Particles", Tribology International, v.67 p.229–239

  • Erdem, Y., Cheng, J., Doyle, F., Pisano, A.P. (2013). "Multi-Temperature Zone, Droplet-based Microreactor for Increased Temperature Control in Nanoparticle Synthesis", Small (available online)

  • Erdem, Y., Cheng, J., Vigevani, G., Doyle, F., Pisano, A. (2013). "Rapidly Printed Polyurethane Microreactor for the Synthesis of Monodisperse Magnetic Iron Oxide Nanoparticles", in preparation

  • Javili, A., McBride, A., Steinmann, P. (2013). "Numerical modelling of thermomechanical solids with highly conductive energetic interfaces", International Journal for Numerical Methods in Engineering, v.93 p.551-574

  • Davydov, D., Javili, A., Steinmann, P. (2013). "On molecular static and surface-enhanced continuum modeling of nano-structures", Computational Material Science, v.69 p.510-519

  • Javili, A., McBride, A., Steinmann, P. (2013). "Thermomechanics of solids with lower-dimensional energetics: A unifying review. On the Importance of surface, interface and curve structures at the nanoscale", Applied Mechanics Reviews, v.65 p.010802

  • Javili, A., McBride, A., Mergheim, J., Steinmann, P., Schmidt, U. (2013). "Micro-to-macro transitions for continua with surface structure at the microscale", International Journal of Solids and Structures, v.50 p.2561-2572

  • Javili, A., dell'Isola, F., Steinmann, P. (2013). "Geometrically nonlinear higher-gradient elasticity with energetic boundaries", Journal of the Mechanics and Physics of Solids, v.61 p.2381-2401

  • Javili, A., Chatzigeorgiou, G., Steinmann, P. (2013). "Computational homogenization in magneto-mechanics", International Journal of Solids and Structures, v.50 p.4197-4216

  • 2012

  • Glatzel, T., Hölscher, H., Schimmel, T., Baykara, M.Z., Schwarz, U., Garcia, R. (2012). "Advanced Atomic Force Microscopy Techniques (Editorial)", Beilstein Journal of Nanotechnology, v.3 p.893-894

  • Akay, A., Carcaterra, A., Bernardini, C. (2012). "Trapping of vibration energy into a set of resonators: Theory and application to aerospace structures ", Mechanical Systems and Signal Processing, v.26 p.1

  • Temizer, İ., Wriggers, P., Hughes, T. (2012). "Three-Dimensional Mortar-Based Frictional Contact Treatment in Isogeometric Analysis with NURBS", Computer Methods in Applied Mechanics and Engineering, v.209-212 p.115-128

  • Karpat, Y., Değer, B., Bahtiyar, O. (2012). "Drilling Thick Fabric Woven CFRP Laminates with Double Point Angle Tools", Journal of Materials Processing Technology, v.212 p.2117

  • Karpat, Y., Değer, B., Bahtiyar, O. (2012). "Mechanistic Force Modeling for Milling of Unidirectional Carbon Fiber Reinforced Polymer Laminates", International Journal of Machine Tools and Manufacture, v.56 p.79

  • Doh, I., Erdem, Y., Pisano, A. (2012). "Trapping and Collection of Uniform Size Droplets for Nanoparticle Synthesis", Applied Physics Letters, v.100 p.074106

  • Temizer, İ. (2012). "On the Asymptotic Expansion Treatment of Two-Scale Finite Thermoelasticity.", International Journal of Engineering Science, v.53 p.74-84

  • Budt, M., Temizer, İ., Wriggers, P. (2012). "A Computational Homogenization Framework for Soft Elastohydrodynamic Lubrication", Computational Mechanics, v.49 p.749-767

  • Temizer, İ. (2012). "A Mixed Formulation of Mortar-Based Frictionless Contact", Computer Methods in Applied Mechanics and Engineering, v.223-224 p.173-185

  • Akay, A., Echols, B., Ding, J., Dussaud, A., Lips, A. (2012). "Measurement of sound, vibration and friction between soft materials under light loads", Wear, v.276 p.61

  • Baykara, M.Z., Dagdeviren, O., Schwendemann, T., Mönig, H., Altman, E., Schwarz, U. (2012). "Probing Three-Dimensional Surface Force Fields with Atomic Resolution: Measurement Strategies, Limitations, and Artifact Reduction", Beilstein Journal of Nanotechnology, v.3 p.637-650

  • Baykara, M.Z., Schwendemann, T., Albers, B., Pilet, N., Mönig, H., Altman, E., Schwarz, U. (2012). "Exploring Atomic-Scale Lateral Forces in the Attractive Regime: A Case Study on Graphite (0001)", Nanotechnology, v.23 p.405703

  • Duncombe, T., Erdem, Y., Shastry, A., Baskaran, R., Böhringer, K. (2012). "Controlling Liquid Drops with Texture Ratchets", Advanced Materials, v.24 p.1545

  • Hanay, S., Kelber, S., Naik, A., Chi, D., Hentz, S., Bullard, C., Colinet, E., Duraffourg, L., Roukes, M. (2012). "Single-Protein Nanomechanical Mass Spectrometry in Real Time", Nature Nanotechnology, v.7 p.602

  • Özcan, O., Sitti, M. (2012). "Modeling of Conductive Atomic Force Microscope Probes for Scanning Tunneling Microscope Operation", Micro & Nano Letters, IET, v.7(4) p.329-333

  • Javili, A., McBride, A., Steinmann, P. (2012). "Numerical modelling of thermomechanical solids with mechanically energetic (generalised) Kapitza interfaces", Computational Material Science, v.65 p.542-551

  • Steinmann, P., McBride, A., Bargmann, S., Javili, A. (2012). "A deformational and configurational framework for geometrically nonlinear continuum thermomechanics coupled to diffusion", International Journal of Non-Linear Mechanics, v.47 p.215-227

  • McBride, A., Mergheim, J., Javili, A., Steinmann, P., Bargmann, S. (2012). "Micro-to-macro transitions for heterogeneous material layers accounting for in-plane stretch", Journal of the Mechanics and Physics of Solids, v.60 p.1221-1239

  • Javili, A., McBride, A., Steinmann, P., Reddy, B. (2012). "Relationships between the admissible range of surface material parameters and stability of linearly elastic bodies", Philosophical Magazine, v.92 p.3540-3563

  • L. Biancofiore, F.G. (2012). "Influence of confinement on obstacle-free turbulent wakes", Computers & Fluids, v.58 p.27–44

  • L. Biancofiore and F. Gallaire, (2012). "Counterpropagating Rossby waves in confined plane wakes", Physics of Fluids, v.24 p.074102

  • 2011

  • Carcaterra, A., Akay, A. (2011). "Dissipation in a finite-size bath", Physical Review E, v.84 p.011121

  • Ma, J., Temizer, İ., Wriggers, P. (2011). "Random homogenization analysis in linear elasticity based on analytical bounds and estimates", International Journal of Solids and Structures, v.48(2) p.280-291

  • Temizer, İ. (2011). "Thermomechanical Contact Homogenization with Random Rough Surfaces and Microscopic Contact Resistance", Tribology International, v.44 p.114-124

  • Temizer, İ., Wriggers, P. (2011). "Homogenization in Finite Thermoelasticity", Journal of the Mechanics and Physics of Solids, v.59 p.344–372

  • Temizer, İ., Wriggers, P. (2011). "An adaptive multiscale resolution strategy for the finite deformation analysis of microheterogeneous structures", Computer Methods in Applied Mechanics and Engineering, v.200 p.2639-2661

  • Çakmakcı, M., Ulsoy, A.G. (2011). "Swappable Distributed MIMO Controller for a VCT Engine", IEEE Transactions on Control Systems Technology, v.19(5) p.1168 - 1177

  • Temizer, İ., Wriggers, P., Hughes, T. (2011). "Contact Treatment in Isogeometric Analysis with NURBS", Computer Methods in Applied Mechanics and Engineering, v.200 p.1100-1112

  • De Lorenzis, L., Temizer, İ., Wriggers, P., Zavarise, G. (2011). "A large deformation frictional contact formulation using NURBS-based isogeometric analysis", International Journal for Numerical Methods in Engineering, v.87 p.1278-1300

  • Fagiani, R., Massi, F., Chatelet, E., Berthier, Y., Akay, A. (2011). "Tactile perception by friction induced vibrations", Tribology International, v.44 p.1100

  • Çetin, B., Cole, K. (2011). "The effect of axial conduction on heat transfer in a liquid microchannel flow", Int. J. Heat and Mass Transfer, v.54 p. 2542-2549

  • Çetin, B., Bayer, O. (2011). "Evaluation of Nusselt number for a flow in a microtube using second-order slip model", Thermal Science, v.15(Suppl. 1) p.103-109

  • Çetin, B., Li, D. (2011). "Dielectrophoresis in microfluidics technology", Electrophoresis, Special Issue on Dielectrophoresis, v.32 p.2410–2427

  • Yildiz, Y., Annaswamy, A., Yanakiev, D., Kolmanovsky, I. (2011). "Spark Ignition Engine Idle Speed Control: An Adaptive Control Approach", IEEE Transactions on Control Systems Technology, v.19(5) p.990-1002

  • Yildiz, Y., Kolmanovsky, I. (2011). "Stability properties and cross coupling performance of the control allocation scheme CAPIO", Journal of Guidance, Control and Dynamics, v.34(12) p.1190-1196

  • Karpat, Y. (2011). "Temperature Dependent Flow Softening of Titanium Alloy Ti6Al4V: An Investigation Using Finite Element Simulation Of Machining", Journal of Materials Processing Technology, v.211 p.737

  • Önal, Ç.D., Özcan, O., Sitti, M. (2011). "Automated 2-D Nanoparticle Manipulation using Atomic Force Microscopy", Nanotechnology, IEEE Transactions on, v.10(3) p.472-481

  • McBride, A., Javili, A., Steinmann, P., Bargmann, S. (2011). "Geometrically nonlinear continuum thermomechanics with surface energies coupled to diffusion", Journal of the Mechanics and Physics of Solids, v.59 p.2116-2133

  • Javili, A., and Steinmann, P. (2011). "A finite element framework for continua with boundary energies. Part III: The thermomechanical case", Computer Methods in Applied Mechanics and Engineering, v.200 p.1963-1977

  • L. Biancofiore, F.G. (2011). "Influence of confinement on a two-dimensional wake", Journal of Fluid Mechanics, v.688 p.297-320

  • L. Biancofiore and F. Gallaire, (2011). "The influence of shear layer thickness on the stability of confined two-dimensional wakes", Physics of Fluids, v.23 p.034103

  • 2010

  • Erdem, Y., Chen, Y., Mohabbi, M., Suh, J., Kovacs, G., Darling, R., Böhringer, K. (2010). "Thermally Actuated Omnidirectional Walking Microrobot", IEEE Journal of MEMS, v.19 p.433

  • Temizer, İ., Wriggers, P. (2010). "Inelastic analysis of granular interfaces via computational contact homogenization", International Journal for Numerical Methods in Engineering, v.84(8) p.883-915

  • Temizer, İ., Wriggers, P. (2010). "Thermal contact conductance characterization via computational contact homogenization: A finite deformation theory framework", International Journal for Numerical Methods in Engineering, v.83(1) p.24-58

  • Temizer, İ., Wriggers, P. (2010). "A micromechanically motivated higher-order continuum formulation of linear thermal conduction", Zeitschrift für Angewandte Mathematik und Mechanik, v.90(10-11) p.768 – 782

  • Çetin, B., Li, D. (2010). "Lab-on-a-chip device for continuous particle and cell separation based on electrical properties via AC-dielectrophoresis ", Electrophoresis, v.31 p.3035-3043

  • Yildiz, Y., Annaswamy, A., Kolmanovsky, I., Yanakiev, D. (2010). "Adaptive Posicast Controller for Time-delay Systems with Relative Degree n*<=2", Automatica, v.46(2) p.279-289

  • Yildiz, Y., Annaswamy, A., Yanakiev, D., Kolmanovsky, I. (2010). "Spark Ignition Engine Fuel-to-Air Ratio Control: An Adaptive Control Approach", Control Engineering Practice, v.18(12) p.1369-1378

  • Karpat, Y. (2010). "A Modified Material Model for the Finite Element Simulation of Machining Titanium Alloy Ti6Al4V", Machining Science and Technology, v.14 p.390

  • Nasibov, H., Baytaroğlu, Ş. (2010). "Recent Advances in Digital Image Velocimetry method for Flow Motion Analysis", International Journal of Metrology Quality Engineering, v.1(1)

  • Nasibov, H., Kholmatov, A., Akselli, B., Nasibov, A., Baytaroğlu, Ş. (2010). "Performance Analysis of the CCD Pixel Binning Option in particle–Image Velocimetry Measurement", IEEE/ASME Transaction on Mechatronics, v.15(4)

  • Baykara, M.Z., Schwendemann, T., Altman, E., Schwarz, U. (2010). "Three-Dimensional Atomic Force Microscopy – Taking Surface Imaging to the Next Level", Advanced Materials, v.22 p.2838-2853

  • Cheng, X., Erdem, Y., Takeuchi, S., Fujita, H., Ratner, B., Böhringer, K. (2010). "Infrared Light Induced Patterning of Proteins on ppNIPAM Thermoresponsive Thin Films: A “Protein Laser Printer"", Lab on a Chip, v.8 p.1079

  • Javili, A., Steinmann, P. (2010). "A finite element framework for continua with boundary energies. Part II: The three-dimensional case", Computer Methods in Applied Mechanics and Engineering, v.199 p.755-765

  • Javili, A., Steinmann, P. (2010). "On thermomechanical solids with boundary structures", International Journal of Solids and Structures, v.47 p.3245-3253

  • L. Biancofiore and F. Gallaire, (2010). "Influence of confinement on temporal stability of plane jets and wakes", Physics of Fluids, v.22 p.014106

  • 2009

  • N. Roveri,, A. Carcaterra,, Akay, A. (2009). "Energy equipartition and frequency distribution in complex attachments", Journal of the Acoustical Society of America, v.126 p.122-128

  • N. Roveri,, A. Carcaterra,, Akay, A. (2009). "Vibration absorption using non-dissipative complex attachments with impacts and parametric stiffness", Journal of the Acoustical Society of America, v.126 p.2306-2314

  • Pierce, A., Akay, A. (2009). "Intrinsic damping models and their role in predicting structural response", Journal of the Acoustical Society of America, v.125 p.2602

  • Çakmakcı, M., Ulsoy, A. (2009). "Improving Component Swapping Modularity using Bi-directional Communication in Networked Control Systems", IEEE/ASME Transactions on Mechatronics, v.14(3) p.307-319

  • Akay, A., Giannini, O., Massi, F., Sestieri, A. (2009). "Disc brake squeal characterization through simplified test rigs", Mechanical Systems and Signal Processing, v.23 p.2590 - 2607

  • Carcaterra, A., Akay, A. (2009). "Vibration absorption based on cluster of beams", J. Sound and Vibration

  • Çetin, B., Li, D. (2009). "Continuous particle separation based on electrical properties using AC-DEP", Electrophoresis, v.30 p.3124-3133

  • Çetin, B., Kang, Y., Wu, Z., Li, D. (2009). "Continuous particle separation by size via AC-DEP using a lab-on-a-chip device with 3D electrodes", Electrophoresis, v.30 p.766-772

  • Çetin, B., Kang, Y., Wu, Z., Li, D. (2009). "Continuous particle separation with localized AC-DEP using embedded electrodes and an insulating hurdle", Electrochimica Acta, v.54 p.1715-1720

  • Çetin, B., Yazıcıoğlu, A.G., Kakaç, S. (2009). "Slip-flow heat transfer in microtubes with axial conduction and viscous dissipation-an extended Graetz problem", Int. J. Thermal Sciences, v.48 p.1673-1678

  • Karpat, Y. (2009). "Investigation of the Effect of Cutting Tool Edge Radius on Material Separation due to Ductile Fracture in Machining", International Journal of Mechanical Sciences, v.51 p.541

  • Baytaroğlu, Ş., Sadıkoğlu, E., Yılmaz, O. (2009). "Ya Ölçmeseydik", TÜBİTAK Bilim ve Teknik Dergisi Mayıs Sayısı

  • Albers, B., Schwendemann, T., Baykara, M.Z., Pilet, N., Liebmann, M., Altman, E., Schwarz, U. (2009). "Three-Dimensional Imaging of Short-Range Chemical Forces with Picometre Resolution", Nature Nanotechnology, v.4 p.307-310

  • Albers, B., Schwendemann, T., Baykara, M.Z., Pilet, N., Liebmann, M., Altman, E., Schwarz, U. (2009). "Data Acquisition and Analysis Procedures for High-Resolution Atomic Force Microscopy in Three Dimensions", Nanotechnology, v.20 p.264002

  • Vaz, C., Wang, H., Ahn, C., Henrich, V., Baykara, M.Z., Schwendemann, T., Pilet, N., Albers, B., Schwarz, U., Zhang, L., Zhu, Y. (2009). "Interface and Electronic Characterization of Thin Epitaxial Co3O4 Films", Surface Science, v.603 p.291-297

  • Naik, A., Hanay, S., Hiebert, W., Feng, X., Roukes, M. (2009). "Towards Single-Molecule Nanomechanical Mass Spectrometry", Nature Nanotechnology, v.4 p.445

  • Javili, A., Steinmann, P. (2009). "A finite element framework for continua with boundary energies. Part I: The two-dimensional case", Computer Methods in Applied Mechanics and Engineering, v.198 p.2198-2208

  • 2008

  • Akay, A. (2008). "A Renaissance in Engineering PhD Education", European Journal of Engineering Education, v.33 p.403-413

  • Tangpong, X., Wickert, J., Akay, A. (2008). "Distributed friction damping of traveling wave vibration in rods", Philosophical Transactions of the Royal Society: Part A, v.366 p.811-827

  • Tangpong, X., Wickert, J., Akay, A. (2008). "Finite Element Model for Hysteretic Friction Damping of Traveling Wave Vibration in Axisymmetric Structures", ASME Journal of Vibration and Acoustics, v.130

  • Temizer, İ., Wriggers, P. (2008). "On the computation of the macroscopic tangent for multiscale volumetric homogenization problems", Computer Methods in Applied Mechanics and Engineering, v.198(3-4) p.495-510

  • Temizer, İ., Wriggers, P. (2008). "A multiscale contact homogenization technique for the modeling of third bodies in the contact interface", Computer Methods in Applied Mechanics and Engineering, v.198(3-4) p.377-396

  • Temizer, İ., Wriggers, P. (2008). "On a mass conservation criterion in homogenization", Journal of Applied Mechanics, Transactions ASME, v.75 p.054503

  • Çetin, B., Travis, B.E., Li, D. (2008). "Analysis of the electro-viscous effects on pressure-driven liquid flow in a two-section heterogeneous microchannel", Electrochimica Acta, v.54 p.660-664

  • Çetin, B., Li, D. (2008). "Effect of Joule heating on electrokinetic transport", Electrophoresis, v.29(5) p.994-1005

  • Çetin, B., Yazıcıoğlu, A.G., Kakaç, S. (2008). "Fluid Flow in microtubes with axial conduction including rarefaction and viscous dissipation", Int. Comm. Heat and Mass Transfer, v.35 p.535-544

  • Özel, T., Karpat, Y., Srivastava, A. (2008). "Hard Turning with Variable Micro-Geometry PcBN Tools", CIRP Annals, v.57 p.73

  • Karpat, Y., Özel, T. (2008). "Analytical and Thermal Modeling of High-Speed Machining with Chamfered Tools", ASME Journal of Manufacturing Science and Engineering, v.130 p.011001

  • Karpat, Y., Özel, T. (2008). "Mechanics of High Speed Cutting with Curvilinear Edge Tools", International Journal of Machine Tools and Manufacture, v.48 p.195

  • Albers, B., Liebmann, M., Schwendemann, T., Baykara, M.Z., Heyde, M., Salmeron, M., Altman, E., Schwarz, U. (2008). "Combined Low-Temperature Scanning Tunneling/Atomic Force Microscope for Atomic Resolution Imaging and Site-Specific Force Spectroscopy", Review of Scientific Instruments, v.79 p.033704

  • Peters, F., Ruppel, C., Javili, A., Kunkel, T. (2008). "The two-dimensional laminar wall jet. Velocity measurements compared with similarity theory", Forschung im Ingenieurwesen (Engineering Research), v.72 p.19-28

  • 2007

  • Ding, J., Tsaur, F., Lips, A., Akay, A. (2007). "Acoustical observation of bubble oscillations induced by bubble popping", Physical Review E, v.75

  • Carcaterra, A., Akay, A. (2007). "Theoretical Foundations of Apparent-Damping Phenomena and Nearly Irreversible Energy Exchange in Linear Conservative Systems", Journal of the Acoustical Society of America, v.121 p.1971-1982

  • Temizer, İ., Wriggers, P. (2007). "An adaptive method for homogenization in orthotropic nonlinear elasticity", Computer Methods in Applied Mechanics and Engineering, v.196(35-36) p.3409-3423

  • Temizer, İ., Zohdi, T.I. (2007). "A numerical method for homogenization in non-linear elasticity", Computational Mechanics, v.40(2) p.281-298

  • Akay, A., Carcaterra, A., Lenti, F. (2007). "Pseudo-Damping in Undamped Plates and Shells", J. Acoust. Soc. Amer, v.122 p.804-813

  • Yildiz, Y., Sabanovic, A., Abidi, K. (2007). "Sliding-Mode Neuro-Controller for Uncertain Systems", IEEE Transactions on Industrial Electronics, v.54(3) p.1676-1685

  • Özel, T., Karpat, Y., Figueira, L., Davim, J. (2007). "Modeling of Surface Finish and Tool Wear in Hard Turning of AISI D2 Steel Using Ceramic Wiper Inserts", Journal of Materials Processing Technology, v.189 p.192

  • Özel, T., Karpat, Y. (2007). "Identification of Constitutive Material Model Parameters for High-Strain Rate Metal Cutting Conditions Using Evolutionary Computational Algorithms", Materials and Manufacturing Processes, v.22 p.659

  • Karpat, Y., Özel, T. (2007). "Multi-Objective Optimization For Turning Processes Using Neural Network Modeling And Dynamic-Neighborhood Particle Swarm Optimization", International Journal of Advanced Manufacturing Technology, v.35 p.234

  • Anlagan, Ö., Fukuda, S. (2007). "East and West: Collaboration or Competition", Science of Machine, v.59(1)

  • 2006

  • Giannini, O., Akay, A., Massi, F. (2006). "Experimental analysis of brake squeal noise on a laboratory brake setup", J. Sound Vibration, v.292 p.1-20

  • Carcaterra, A., Akay, A., Koc, I.M. (2006). "Near-irreversibility in a conservative linear structure with singularity points in its modal density", J. Acoust. Soc. Amer, v.119 p.2141-2149

  • Çetin, B., Yuncu, H., Kakaç, S. (2006). "Gaseous flow in microconduits with viscous dissipation", Int. J. Transport Phenomena, v.8(4) p.297-315

  • Karpat, Y., Özel, T. (2006). "Predictive Analytical and Thermal Modeling of Orthogonal Cutting Process. Part II: Effect of Tool Flank Wear on Tool Forces, Stresses and Temperature Distributions", ASME Journal of Manufacturing Science and Engineering, v.128 p.445

  • Karpat, Y., Özel, T. (2006). "Predictive Analytical and Thermal Modeling of Orthogonal Cutting Process. Part I: Predictions of Tool Forces, Stresses and Temperature Distributions", ASME Journal of Manufacturing Science and Engineering, v.128 p.435

  • 2005

  • Koc, I., Carcaterra, A., Xu, Z., Akay, A. (2005). "Energy Sinks for Vibration Reduction: Optimum Frequency Distribution", Journal of the Acoustical Society of America, v.118 p.3031-3042

  • Akay, A., Carcaterra, A., Xu, Z., Koc, I. (2005). "Experiment on vibration absorption using energy sinks", Journal of the Acoustical Society of America, v.118 p.3043-3049

  • Temizer, İ., Zohdi, T.I. (2005). "Agglomeration and refragmentation in microscale granular flows", International Journal of Fracture, v.131(3) p.L37-L44

  • Koh, K., Griffin, J.H., Filippi, S., Akay, A. (2005). "Characterization of turbine blade friction dampers", J. Engineering for Gas Turbines and Power, v.127 p.856-862

  • Özel, T., Karpat, Y. (2005). "Predictive Modeling of Surface Roughness and Tool Wear in Hard Turning using Regression and Neural Networks", International Journal of Machine Tools and Manufacture, v.45 p.467

  • 2004

  • Filippi, S., Akay, A., Gola, M. (2004). "Measurement of Tangential Contact Hysteresis During Microslip", ASME Journal of Tribology, v.126 p.482-489

  • Carcaterra, A., Akay, A. (2004). "Transient Energy Exchange Between a Primary Structure and a Set of Oscillators: Return Time and Apparent Damping", Journal of the Acoustical Society of America, v.115 p.683-696

  • Bilkay, O., Anlagan, Ö. (2004). "Computer Simulation of Stick-Slip Motion in Machine Tool Slideways", Tribology International 37 p. 347-351

  • Bilkay, O., Anlagan, Ö., Kilic, S. (2004). "Job Shop Scheduling Using Fuzzy Logic", Int. J. of Advanced Manufacturing Technology, v.23 p.606-619

  • 2003

  • Akay, A. (2003). "The renaissance engineer: Educating engineers in a post-9/11 world", European Journal of Engineering Education, v.28 p.145-150

  • 2002

  • Akay, A. (2002). "Acoustics of Friction", J. Acoust. Soc. Amer., v.111 p.1525-1548

  • Karpenko, Y., Akay, A. (2002). "A numerical method for analysis of extended rough wavy surfaces in contact", ASME J. Tribology, v.124 p.668-679

  • Ünver, H.O., Anlagan, Ö. (2002). "Design and Implementation of an Agent-based Shop Floor Control System Using Windows-DNA", International Journal of Computer Integrated Manufacturing, v.15(5) p.427

  • 2001

  • Karpenko, Y., Akay, A. (2001). "A numerical model of friction between rough surfaces", Tribology International , v.34 p.531-545

  • Ünver, H., Durak, U., Anlagan, Ö., Kiliç, S. (2001). "Atölye Kontrol Sistemleri", Mühendis ve Makina, v.493 p.17-22

  • Sari, B., Cangar, T., Anlagan, Ö., Kilic, S. (2001). "Web Based CIM Laboratory Experience in ME Curriculum: Part Design , NC-Code Generation and Work Order Dispatching via Internet", American Society for Engineering Education

  • 2000

  • Çelik, C., Akay, A. (2000). "Dissipation in solids: Thermal oscillations of atoms", J. Acoust. Soc. Amer, v.108 (1) p.184-191

  • 1999

  • Bengisu, M.T., Akay, A. (1999). "Stick-slip oscillations: Dynamics of friction and surface roughness", J. Acoust. Soc. Amer., v.105 (1) p.194-205

  • 1998

  • Tzou, K., Wickert, J.A., Akay, A. (1998). "Frequency clusters in the spectrum of annular cylinders", J. Applied Mechanics, v.65(4) p.797-803

  • Akay, A., Xu, Z. (1998). "Experiments on acoustic streaming in a fluid layer between vibrating surfaces and amplitude-dependent damping of vibrations", J. Acoust Soc. Amer., v.103 p.865-871

  • Tzou, K., Wickert, J.A., Akay, A. (1998). "In-plane vibration modes of arbitrarily thick disks", ASME J. Vibration and Acoustics, v.120 p.384-391

  • 1997

  • Bengisu, M.T., Akay, A. (1997). "Relation of dry friction to surface roughness", ASME J. Tribology, v.119 p.18-25

  • Hashemipour, M., Anlagan, Ö., Kayaligil, S. (1997). "A Computer-Supported Methodology for Requirements Modelling in CIM for Small and Medium size Enterprises: A Demonstration in Apparel Industry", Int. J. Computer Integrated Manufacturing, v.10(1-4 ) p. 199-211

  • 1996

  • Rhee, J., Akay, A. (1996). "Dynamic response of a revolute joint with clearance", Mechanism and Machine Theory , v.31 p.121-134

  • 1995

  • Kang, J., Akay, A., Xu, Z. (1995). "Intertia effects on compressible squeeze films", ASME J. Vibrations and Acoustics, v.117 p.94-102

  • 1994

  • Gaunaurd, G.C., Akay, A. (1994). "Isolation of the 'spectrograms' and 'rosettes' of insonified sets of submerged, concentric, thin shells", ASME J. Vibration and Acoustics, v.116 p.573-577

  • Swayze, J., Akay, A. (1994). "Effects of system dynamics on friction-induced oscillations", J. Sound and Vibration, v.173 p.599-609

  • Bengisu, M.T., Akay, A. (1994). "Stability of friction-induced vibrations in multi-degree-of-freedom systems", J. Sound and Vibration, v.171 p.557-570

  • 1993

  • Akay, A., Sener, S., Gaunaurd, G.C. (1993). "Acoustic scattering from fluid-filled, concentric, submerged, cylindrical elastic shells", J. Acoustical Society of America, v.94 p.3277-3294

  • Uras, H., Akay, A. (1993). "Mechanical engineering capstone design course", J. Mechanical Engineering Education, v.21 p.347-354

  • Akay, A., Ingard, K.U. (1993). "Radiation from bending waves in the presence of a flow boundary layer", ASME J. Vibration and Acoustics, v.115 p.411-416

  • 1992

  • Akay, A. (1992). "Normal and angular motions at rough planar contacts during sliding with friction- Discussion", ASME J. Tribology, v.114 p.578

  • Latcha, M., Akay, A. (1992). "Effects of viscous and thermal losses on radiation from an infinite plate", ASME J. Vibration and Acoustics, v.114 p.415-419

  • Wu, X.F., Akay, A. (1992). "Sound radiation from vibrating bodies in motion", J. Acoust. Soc. Amer., v.91 p.2544-2555

  • 1991

  • Onsay, T., Akay, A. (1991). "Vibration reduction of a flexible arm by time-optimal open-loop control", J. Sound and Vibration, v.147 p.283-300

  • Akay, A. (1991). "Scattering of sound from concentric cylindrical shells", J. Acoust. Soc. Amer., v.89 p.1572-1578

  • 1990

  • Akay, A. (1990). "Radiation from a finite array of simple sources", J. Acoust. Soc. Amer., v.87 p.1449-1454

  • 1987

  • Ingrad, K.U., Akay, A. (1987). "On the vibration damping of a plate by means of a viscous fluid layer", J. Vibration, Acoustics, Stress and Reliability in Design, v.109 p.178-184

  • Ingrad, K.U., Akay, A. (1987). "Acoustic radiation from bending waves of a plate", J. Vibrations, Acoustics, Stress and Reliability in Design, v.109 p.75-81

  • 1986

  • Latcha, M., Akay, A. (1986). "Application of the Helmholtz integral in acoustics", J. Vibration, Acoustics, Stress and Reliability in Design, v.108 p.447-453

  • Bengisu, M.T., Hidayetoglu, T., Akay, A. (1986). "A theoretical and experimental investigation of contact loss in the clearances of a four-bar mechanism", J. Mechanism, Transmission, and Automation in Design, v.108 p.237-244

  • Zhou, Q., Anlagan, Ö., Eman, K. (1986). "A New Method for Measuring and Compensating Pitch Error in the Manufacturing of Lead Screws", Int. J. of Machine Tool Design and Research, v.26(4) p.359-367

  • 1984

  • Akay, A., Tokunage, M., Latcha, M. (1984). "A theoretical analysis of transient sound radiation from a clamped circular plate", J. Applied Mechanics, v.51 p.41-47

  • 1983

  • Akay, A., Latcha, M. (1983). "Sound radiation from an impact-excited clamped circular plate in an infinite baffle", J. Acoust. Soc. Amer, v.74 p.640-648

  • Akay, A., Bengisu, M.T., Latcha, M. (1983). "Transient acoustic radiation from impacted beam-like structures", J. Sound and Vibration, v.91 p.135-145

  • 1982

  • Akay, A. (1982). "Mathematical modeling of transient vibration and acoustic radiation from impacted systems", J. Mathematical Modeling, v.3 p.535-541

  • 1981

  • Salt, N., Konishi, T., Cook, R., Akay, A. (1981). "Comparison between the effects of continuous and impact noise on cochlear potentials of guinea pigs", J. Acoust. Soc. Amer., v.69 p.1746-1752

  • Cook, R., Hamm, C.W., Akay, A. (1981). "Shock measurement with noncontacting fiber optic levers", J. Sound and Vibration, v.76 p.443-456

  • 1978

  • Akay, A. (1978). "A review of impact noise", J. Acoust. Soc. Amer, v.64 p.977-987

  • Akay, A., E. Saibel, (1978). "Fracture time of composites under tensile loading", J. Composite Materials, v.12 p.262-274

  • Akay, A., T. H. Hodgson, (1978). "Acoustic radiation from the elastic impact of a sphere with a slab", Applied Acoustics, v.11 p.285-304

  • Akay, A., T. H. Hodgson, (1978). "Sound radiation from a accelerated or decelerated sphere", J. Acoust. Soc. Amer., v.63 p.313-318

  • 1976

  • Akay, A., E. Saibel, (1976). "Fracture of polymeric materials under tensile loads", Wear, v.37 p.377-381

  • Pouraliakbar, H., Firooz, S., Jandaghi, M.R., Pakbaz, M., Nazari, A. (). "Predicting the ultimate grain size of aluminum sheets undergone constrained groove pressing ", International Journal of Advanced Manufacturing Technology

  • Pouraliakbar, H., Pakbaz, M., Firooz, S., Jandaghi, M.R., Khalaj, G. (). "“Study on the dynamic and static softening phenomena in Al¬6Mg alloy during two ¬stage deformation through interrupted hot compression test” ", Journal of Measurement

  • Pouraliakbar, H., Firooz, S., Jandaghi, M.R., Khalaj, G., Amirafshar, A. (). "Combined effect of heat treatment and rolling on pre-strained and SPDed aluminum sheet", Journal of Material Science and Engineering A

Konferans Makaleleri

    2017

  • Öner, S.D., Çetin, B. (2017). "Modeling of electro-kinetic motion of Janus droplet", ASME 15th Int. Conf. Nano/Micro/Mini-channels (ICNMM 2017), August 27-31, Cambridge, MA, USA (Paper No: 5501)

  • Yucelen, T., Yildiz, Y., Sipahi, R. Y. E., Nguyen, N. . (2017). "Stability Analysis of Human-Adaptive Controller Interactions", AIAA Science and Technology Forum and Exposition (accepted)

  • Alan, A., Yildiz, Y., Poyraz U., (2017). "Pressure Control of Cold Air Testing Plant with Delay Resistant Closed-loop Reference Model Adaptive Control", AIAA Science and Technology Forum and Exposition (accepted)

  • Yousefi, E., Yildiz, Y., Sipahi, R. Y. T. (2017). "The Effect of Remote-Signal Feedback Architecture on the Stability of Human-in-the-Loop Telerobotics in the Presence of Time-Delays", IEEE Conference on Control Technology and Applications (accepted)

  • Uslu, H.D., Canpolat, Ç., Çetin, B. (2017). "Modeling of an AC-electro-osmosis based microfluidic mixer", ASME 15th Int. Conf. Nano/Micro/Mini-channels (ICNMM 2017), August 27-31, Cambridge, MA, USA (Paper No: 5536)

  • Akkuş, Y., Çetin, B., Dursunkaya, Z. (2017). "Modeling of of evaporation from a sessile constant shape droplet", ASME 15th Int. Conf. Nano/Micro/Mini-channels (ICNMM 2017), August 27-31, Cambridge, MA, USA (Paper No: 5537)

  • Tohidi, S.S., Yildiz, Y., Kolmanovsky, I.V. (2017). "Adaptive Control Allocation for Over-Actuated Systems with Actuator Saturation", IFAC World Congress (accepted)

  • Dibaji, S.M., Yildiz, Y., Annaswamy, A., Chakrabortty A., (2017). "Delay-Aware Control Designs of Wide-Area Power Networks", IFAC World Congress (accepted)

  • Yousefi, E., Yildiz, Y., Sipahi, R., Yucelen, T. (2017). "Stability Analysis of a Human-in-the-Loop Telerobotics System With Two Independent Time-Delays", IFAC World Congress (accepted)

  • Alijani, H., Çetin, B., Akkuş, Y., Dursunkaya, Z. (2017). "3-D modeling of a flat-grooved heat pipe", 10th Int. Conf. on Comput. Heat Mass Transfer, May 28 - June 1, Seoul, Korea

  • Alan, A., Yildiz, Y., Poyraz, U. (2017). "Adaptive Pressure Control Experiment: Controller Design and Implementation", IEEE Conference on Control Technology and Applications (accepted)

  • Yousefi, E., Demir, D.F., Sipahi, R., Yücelen, T., Yildiz, Y. (2017). "Effects Of Linear Filter On Stability And Performance Of Human-in-the-Loop Model Reference Adaptive Control Architecture", ASME Dynamic Systems and Controls Conference (accepted)

  • Çetin, B., Öner, S.D., Özer, M.B., Baranoğlu, B. (2017). "Mikro-kanallarda parçacık hareketinin modellenmesi", 21th National Conference on Thermal Sciences (ULIBTK'17), September 13-16, Çorum, Turkey (Paper No: 178)

  • Çetin, B., Kuşcu, Y.F., Atay, A., Çetin, B. (2017). "Isı kaynağı içeren ısı iletimi problemleri için alternatif yaklaşımlar", 21th National Conference on Thermal Sciences (ULIBTK'17), September 13-16, Çorum, Turkey (Paper No: 180)

  • Aydoğdu, İ.I., Fidan, C., Çetin, B. (2017). "Karşıt akışlı Ranque-Hilsch vorteks tüpünün deneysel analizi", 21th National Conference on Thermal Sciences (ULIBTK'17), September 13-16, Çorum, Turkey (Paper No: 181)

  • Atay, A., Sarıaslan, B., Kuşcu, Y.F., Akkuş, Y., Saygan, S., Türker, A.G., Çetin, B., Dursunkaya, Z. (2017). "Sinterli ve oluklu ısı borularının kuruma sınırlarının deneysel tespiti", 21th National Conference on Thermal Sciences (ULIBTK'17), September 13-16, Çorum, Turkey (Paper No: 182)

  • Hossein Alijani,, Akkuş, Y., Çetin, B., Dursunkaya, Z. (2017). "Düz-oluklu alüminyum ısı borularının ısıl performanslarının deneysel olarak incelenmesi", 21th National Conference on Thermal Sciences (ULIBTK'17), September 13-16, Çorum, Turkey (Paper No: 183)

  • Ellialtıoğlı, P., Danış, B.İ., Çetin, B. (2017). "Parametric analysis of a combined cycle power plant with complete combustion using MATLAB GUI", 21th National Conference on Thermal Sciences (ULIBTK'17), September 13-16, Çorum, Turkey (Paper No: 187)

  • 2016

  • Musavi, N., Tekelioğlu, K.B., Yildiz, Y., Gunes, K., Onural, D. (2016). "A Game Theoretical Modeling and Simulation Framework For The Integration Of UAS In To The NAS", AIAA Infotech @ Aerospace, AIAA Science and Technology Forum and Exposition (Accepted)

  • Tohidi, S.S., Yildiz, Y., Kolmanovsky, I. (2016). "Fault Tolerant Control for Over-Actuated Systems: An Adaptive Correction Approach", American Control Conference, July 6-8, Boston, USA (accepted)

  • Oyler, D. Y. Y. G. A. K. I. (2016). "A Game Theoretical Model of Traffic with Multiple Interacting Drivers for Use in Autonomous Vehicle Development", American Control Conference, July 6-8, Boston, USA (accepted)

  • Oyler, D.W., Li, N., Zhang, M., Yildiz, Y., Girard, A., Kolmanovsky I. V., (2016). "Hierarchical Reasoning Game Theory Based Approach for Evaluation and Testing of Autonomous Vehicle Control Systems", IEEE Conference on Decision and Control (accepted)

  • Karpat, Y., Oliaei, S.N. (2016). "Fabrication of PCD Mechanical Planarization Tools by Using μ-Wire Electrical Discharge Machining", Procedia CIRP, v.42 p.311-316

  • Karpat, Y., Çakmakcı, M., Ali, Z., Türeyen, E.B. (2016). "Fabrication of Polymer Micro Needles for Transdermal Drug Delivery System Using DLP Based Projection Stereo-lithography", Procedia CIRP, v.42 p.87-90

  • Karpat, Y., Bahtiyar, O. (2016). "Energy Based Investigation of Process Parameters While Drilling Carbon Fiber Reinforced Polymers", Procedia CIRP, v.46 p.59-62

  • Kurt, C., Çetin, B., Baranoglu, B. (2016). "2D boundary element formulation for deformable particle flow in a microchannel", Int. Conf. Boundary Element and Meshless Techniques, July 11-13, Ankara, Turkey

  • Kuşcu, Y., Atay, A., Çetin, B., Meco, H., Çetin, B. (2016). "Thermal modeling of heat affected zone of a low carbon steel in gas arc and laser welding", 17th Int. Conf. Machine Design and Production (UMTIK-2016), July 12-15, Bursa, Turkey

  • Çetin, B., Kaplan, H., Durkaya, G., Kurtuldu, H. (2016). "Low cost, ultra high throughput particle counting using inertial microfluidics", The 20th Int. Conf. Miniaturized Systems for Chemistry and Life Sciences (MicroTAS 2016), October 9-13, Dublin, Ireland

  • Çağatay, E., Özer, M.B., Çetin, B. (2016). "3D Modeling of on-chip acoustophoretic particle manipulation in a polymer microfluidic device", The 20th Int. Conf. Miniaturized Systems for Chemistry and Life Sciences (MicroTAS 2016), October 9-13, Dublin, Ireland

  • Aşık, M.D., Çetin, B., Kaplan, M., Erdem, Y., Sağlam, N. (2016). "3D printed microfluidic reactor for high throughput chitosan nanoparticle synthesis", The 20th Int. Conf. Miniaturized Systems for Chemistry and Life Sciences (MicroTAS 2016), October 9-13, Dublin, Ireland

  • Rasooli, R., Karaoğlu, O.K., Çetin, B. (2016). "Simulation of particle flow in a spiral microchannel for inertial microfluidics", 5th Micro and Nano Flows Conference, September 11-14, Milan, Italy

  • Alijanvad, H.A., Çetin, B., Akkuş, Y., Dursunkaya, Z. (2016). "Experimental investigation of thermal performance of aluminum-grooved micro heat pipe", 5th Micro and Nano Flows Conference, September 11-14, Milan, Italy

  • Öner, S.D., Karakuş, A., Çetin, B., Baranoğlu, B. (2016). "Parallel boundary element formulation for 2D microfluidic particulate flow for multi-threaded architectures", ECCOMAS Congress 2016, June 5-10, Crete Island, Greece

  • Cole, K.D., Doğrusöz, Y.S., Çetin, B. (2016). "Forward models for the electrocardiography problem: Voltage sources versus current sources", 2016 Inverse Problems Symposium, June 5-7, Virginia Military Institute, Lexington, VA, USA

  • Yıldıran, İ.N., Öner, S.D., Yılmaz, O.D., Çetin, B. (2016). "Mathematical modeling of performance of a liquid piston compressor", Proc. 9th Pump Valve Compressor Conference, May 5-7, İstanbul, Turkey

  • B. Talebi, A.A. S.F. (2016). "OPTIMIZATION OF COMPOSITE PATCH REPAIR FOR INCLINED CRACK ON ALUMINUM PLATE USING GENETIC ALGORITHM ", 30th congress of International Council of Aeronautical Sciences(ICAS) conference, Daejeon South Korea

  • 2015

  • Taze, S., Çetin, B., Yılmaz, M., Dursunkaya, Z. (2015). "Assessment of different micro-fabrication techniques for the fabrication of a micro-groove heat pipe", 20th National Conference on Thermal Sciences (ULIBTK'15), September 2-5, Balıkesir, Turkey

  • Yıldıran, İ., Öner, D., Çetin, B. (2015). "GPU-computation of 2-dimensional Laplace Equation using Boundary Element Method", 20th National Conference on Thermal Sciences (ULIBTK'15), September 2-5, Balıkesir, Turkey

  • Çoşkun, S., Yüksel, M., Bulut, Y., Çetin, B. (2015). "Parametric analysis of a combined cycle using MATLAB GUI", 20th National Conference on Thermal Sciences (ULIBTK'15), September 2-5, Balıkesir, Turkey

  • Çağatay, E., Çetin, B., Özer, B. (2015). "An integrated microfluidic device for particle wash and particle separation", 2nd Novel Fluidic Technologies and Applications Workshop, April 9-10, İzmir, Turkey

  • Rasooli, R., Çetin, B., Baranoğlu, B. (2015). "Assessment of Different Element Orders for Boundary Element Formulation of Particulate Flow in Microchannels", 2nd Novel Fluidic Technologies and Applications Workshop, April 9-10, İzmir, Turkey

  • Karakurt, İ., Çetin, B. (2015). "Continuous flow microfluidic PCR reactor", 2nd Novel Fluidic Technologies and Applications Workshop, April 9-10, İzmir, Turkey

  • Kerse, C., Kalaycıoğlu, H., Elahi, P., Akçaalan, Ö., Yavaş, S., Aşık, M.D., Kesim, D., Yavuz, K., Çetin, B., İlday, F.Ö. (2015). "Ablation-cooled material removal at high speed with femtosecond pulse bursts", Advanced Solid State Lasers Conference and Exhibition (ASSL 2015), October 4-9, Berlin, Germany

  • Solmaz, M.E., Çetin, B., Baranoğlu, B., Serhatlıoğlu, M., Bıyıklı, N. (2015). "Boundary Element Method for optical force calibration in microfluidic dual-beam optical trap", SPIE-Optical Trapping and Optical Micromanipulation XII, August 9-13, San Diego, CA, USA

  • Türkmen, İ., Sankır, M., Çetin, B., Baker, D. (2015). "Comparison of planar and cylindrical 3D PEMFC Models", III. European Conference on Renewable Energy Systems (ECRES), October 7-10, Antalya, Turkey

  • Çetin, B., Çelik, B., Sert, C. (2015). "Analysis of heat transfer in slip-flow regime by parallel implementation of Lattice-Boltzmann method on GPUs", 8th International Conference on Computational Heat and Mass Transfer(138), May 25-28, Istanbul, Turkey

  • Yildiz, Y., Annaswamy, A. (2015). "Robust Adaptive Posicast Controller", IFAC Workshop on Time-Delay Systems (accepted)

  • Abidi, K., Yildiz, Y. (2015). "On the Discrete Adaptive Posicast Controller", IFAC Workshop on Time-Delay Systems (accepted)

  • Alan, A., Yildiz, Y., Poyraz, U. (2015). "Gas Generator Pressure Control in Throttleable Ducted Rockets: A Classical and Adaptive Control Approach", AIAA/SAE/ASEE Joint Propulsion Conference (accepted)

  • Yildiz, Y., Unel, M., Demirel, A.E. (2015). "Adaptive Nonlinear Hierarchical Control of a Novel Quad Tilt-Wing UAV", European Control Conference (accepted)

  • A.G. Demir,, B. Previtali,, Barbaros Çetin, (2015). "Laser micro-milling for the manufacturing of microfluidic device mold", 8th Int. Conference and Exhibition on Design and Production of Machines and Dies/Molds, June 18-21, Kuşadası, Aydın, Turkey (Submitted)

  • Çetin, B., Cole, K. (2015). "Modeling of conjugate heat transfer in an electrically heated microtube", 8th International Conference on Computational Heat and Mass Transfer(140), May 25-28, Istanbul, Turkey

  • Taze, S., Çetin, B., Dursunkaya, Z. (2015). "Multi-physics modeling of silicon micro-grooved heat pipe", 8th International Conference on Computational Heat and Mass Transfer(139), May 25-28, Istanbul, Turkey

  • Müderrisoğlu, C., Onbaş, R., Çetin, B., Sargın, S., Yeşil-Çeliktaş, Ö. (2015). "Design, fabrication and testing of PDMS microchips for enzymatic hydrolyses of saponins", VII. Bioengineering Cong. ”Human Welfare” (BEC2015), November 19-21, İzmir, Turkey

  • Karpat, Y., Bahtiyar, O. (2015). "Comparative analysis of PCD drill designs during drilling of CFRP laminates", Procedia CIRP, v.31 p.316-321

  • 2014

  • Zeinali, S., Cetin, B., Büyükkoçak, S., Özer, B. (2014). "Fabrication of microfluidic devices for dielectrophoretic and acoustophoretic applications using high-precision machining", 16th Int. Conference on Machine Design and Production (UMTIK-2014), Paper No: 43, June 30 - July 3, Izmir, Turkey

  • Güler, K., Çetin, B., Aksel, H. (2014). "Simulation of thermal characteristics of radiators using a porous model", International Symposium on Convective Heat and Mass Transfer (CONV-14), Paper No: 176, June 8-13, Kuşadası, Aydın, Turkey

  • Karakurt, İ., Çetin, B. (2014). "Multiphysics simulation of microfluidic reactor for polymerase chain reaction", International Symposium on Convective Heat and Mass Transfer (CONV-14), Paper No: 79, June 8-13, Kuşadası, Aydın, Turkey

  • Büyükkoçak, S., Özer, B., Çetin, B. (2014). "Finite element modeling of micro-particle manipulation using ultrasonic standing waves", ASME 12th International Conference on Nanochannels, Microchannels and Minichannels, August 3-7, Chicago, IL, USA

  • Çetin, B., Zeinali, S. (2014). "Modeling of on-chip (bio)particle separation and counting using 3D electrode structures", 4th Micro and Nano Flows Conference, September 7-10, University College London, UK

  • Baranoğlu, B., Çetin, B. (2014). "A particle flow specific boundary element formulation for microfluidic applications", 4th Micro and Nano Flows Conference, September 7-10, University College London, UK

  • Oliaei, S., Karpat, Y. (2014). "Experimental Investigations on Micro Milling of Stavax Stainless Steel", CIRP High Performance Cutting Conference, Berkeley, USA

  • Karpelson, M., Waters, B., Goldberg, B., Mahoney, B., Özcan, O., Baisch, A., Meyitang, P., Smith, J., Wood, R. (2014). "A Wirelessly Powered, Biologically-Inspired Ambulatory Microrobot", ICRA’14. IEEE International Conference on Robotics and Automation p.2384-2391, Hong Kong, China

  • Goldberg, B., Karpelson, M., Özcan, O., Wood, R. (2014). "Planar Fabrication of a Mesoscale Voice Coil Actuator", ICRA’14. IEEE International Conference on Robotics and Automation p.6319-6325, Hong Kong, China

  • Özcan, O., Baisch, A., Ithier, C., Wood, R. (2014). "Powertrain Selection for a Biologically-Inspired Miniature Quadruped Robot", ICRA’14. IEEE International Conference on Robotics and Automation p.2398-2405, Hong Kong, China

  • Aukes, D., Özcan, O., Wood, R. (2014). "Monolithic Design and Fabrication of a 2-DOF Bio-Inspired Leg Transmission", Living Machines: Biomimetic and Biohybrid Systems p.1-10, Rome, Italy

  • Seitz, B., Goldberg, B., Doshi, N., Özcan, O., Christensen, D., Hawkes, E., Cutkosky, M., Wood, R. (2014). "Bio-Inspired Mechanisms for Inclined Locomotion in a Legged Insect-Scale Robot", 2014 ROBIO, IEEE International Conference on Robotics and Biomimetics, Bali, Indonesia

  • 2013

  • Çagatay, E., Altınok, M.F., Çetin, B. (2013). "Analysis of gas power cycyles and Brayton refrigeration cycles using MATLAB", 19th National Conference on Thermal Sciences(164) p.978-982, September 9-12, Samsun, TURKEY

  • Pulyaev, S., Akgoz, O., Cetin, B. (2013). "Recovery of the waste heat by organic Rankine cycle in power plants", 19th National Conference on Thermal Sciences(162) p.978-982, September 9-12, Samsun, TURKEY

  • Salemmilani, R., Çetin, B. (2013). "Spiral microfluidic device for continuous flow PCR", ASME 2013 Summer Heat Transfer Conference(17305) p.V002T11A001, July 14–19, Minneapolis, MN, USA

  • Çetin, B., Taze, S., Aşık, M., Tuncel, A. (2013). "Microfluidic device for synthesis of chitosan nanoparticles", ASME 2013 Fluid Engineering Summer Meeting (16349) p.V002T21A006, July 7-11, Incline village, Nevada, USA

  • Çetin, B., Büyükkoçak, S., Zeinali, S., Özer, B. (2013). "Simulation of an integrated microfluidic device for bioparticle wash, separation and concentration", Proc. ASME 2013 4th Microscale/Nanoscale Heat & Mass Transfer International Conference, December 11-14, Hong Kong, China

  • Yildiz, Y., Brat, G., A. Agogino, (2013). "Predicting Pilot Behavior in Medium Scale Scenarios Using Game Theory and Reinforcement Learning", AIAA Modeling and Simulation Technologies Conference(AIAA 2013-4908)

  • Craun, R.W., Acosta, D.M., Beard, S.D., Leonard, M.W., Hardy, G.H., Weinstein, M., Yildiz, Y. (2013). "Motion-Based Piloted Simulation Evaluation of a Control Allocation Technique to Recover from Pilot Induced Oscillations", AIAA Guidance, Navigation, and Control (GNC) Conference(AIAA 2013-4926)

  • Baranoğlu, B., Çetin, B. (2013). "Simulation of particle motion in a microchannel using Boundary Element Method", 18th National Mechanics Conference, August 26-30, Manisa, TURKEY

  • Oliaei, S., Özdemir C.,, Karpat, Y. (2013). "Fabrication of Micro Ball End Mills Using Micro Electro Discharge Machining", 7th International Conference And Exhibition on Design and Production of Machines and Dies/Molds, Antalya, TURKEY

  • Özcan, O., Baisch, A. T., Wood, R. (2013). "Design and Feedback Control of a Biologically-Inspired Miniature Quadruped", IROS’13. IEEE/RSJ International Conference on Intelligent Robots and Systems p.1438-1444, Tokyo, Japan

  • 2012

  • Dokuyucu, H.I., Çakmakcı, M. (2012). "Concurrent Design of Energy Management and Vehicle Stability Algorithms for a Parallel Hybrid Vehicle using Dynamic Programming", Proc. of the American Control Conference (ACC), Montreal, Canada

  • Emre Akgün,, Çakmakcı, M. (2012). "Development of a Supervisory Controller for Residential Energy Management Problems", Proc. of the American Control Conference (ACC), Montreal, Canada

  • Karpat, Y., Değer, B. B. O. (2012). "Mechanistic Force Modeling for Milling of Unidirectional Carbon Fiber Reinforced Polymer (CFRP) Laminates", 5th CIRP Conference on High Performance Cutting, Zurich

  • Çetin, B. (2012). "Evaluation of Nusselt number for a flow in a microtube with second-order model including thermal creep", 10th Int. Conf. Nano/Micro/Mini-channels (ICNMM’2012)(73321) p.251-256, July 8–12, Puerto Rico, USA

  • Yildiz, Y., Brat, G., Lee, R. (2012). "Using Game Theoretic Models to Predict Pilot Behavior in NextGen Merging and Landing Scenario," ", AIAA Modeling and Simulation Technologies Conference(AIAA Paper 2012-4487)

  • 2011

  • Çakmakcı, M., Li, Y., Liu, S. (2011). "Model-in-the-Loop Development for Fuel Cell Vehicle", Proc. of the American Control Conference (ACC), San Fransisco, CA

  • Azemi, E., Korkmaz, E., Karpat, Y., Filiz, S. (2011). "Micromachining of PMMA and PLGA Polymer Micro Needles for Medical Applications", 6th International Conference on MicroManufacturing (ICOMM), March 7-10, 2011, Tokyo, Japan

  • Gürol, Y., Çelik, S.B., Çetin, B. (2011). "Simulation of 2D electro-osmotic flow inside microchannels using Lattice-Boltzmann method on GPUs", 18th National Conference on Thermal Sciences , September 7-10, Zonguldak, Turkey

  • Güler, K.G., Çetin, B. (2011). "Simulation of elektrokinetic manipulation of particle inside microchannels", 18th National Conference on Thermal Sciences, September 7-10, Zonguldak, Turkey

  • Çetin, B., Taze, S., Ozturk, Y. (2011). "Viscous flow calculations for undergraduate fluid mechanics education using MATLAB", 18th National Conference on Thermal Sciences, September 7-10, Zonguldak, Turkey

  • Çelik, B.S., Sert, C., Çetin, B. (2011). "Simulation of channel flow by parallel implementation of thermal Lattice-Boltzmann method on GPUs", 7th International Conference on Computational Heat and Mass Transfer (ICCHMT'2011), July 18-22, Istanbul, Turkey

  • Çelik, B.S., Sert, C., Çetin, B. (2011). "Simulation of lid-driven cavity flow by parallel implementation of Lattice-Boltzmann method on GPUs", 2nd International Symposium on Computing in Science and Engineering (ISCSE'11), June 1-4, Kusadasi, Aydin, Turkey

  • Yildiz, Y. (2011). "The Effect of Explicit Adaptive Time Delay Compensation on Time Delay Margin", AIAA Guidance, Navigation, and Control Conference(AIAA Paper 2011-6440)

  • Abidi, K., Yildiz, Y. (2011). "Discrete-Time Adaptive Posicast Controller for Uncertain Time-Delay Systems", AIAA Guidance, Navigation, and Control Conference,(AIAA Paper 2011-6442)

  • Yildiz, Y., Kolmanovsky, I. (2011). "A Control Allocation System for Automatic Detection and Compensation of Phase Shift Due To Actuator Rate Limiting", American Control Conference p.444 - 449

  • Önal, Ç.D., Sümer, B., Özcan, O., Nain, A., Sitti, M. (2011). "Tip Based Robotic Precision Micro/Nanomanipulation Systems", SPIE Defense, Security, and Sensing, International Society for Optics and Photonics p.80580M, Orlando, FL, USA

  • L. Biancofiore, F.G. (2011). "Large eddy simulations of confined turbulent wake flows", Journal of Physics: Conference Series, v.318 p.042044

  • 2010

  • Korkmaz, E., Karpat, Y., Filiz, S. (2010). "Recent Developments in Micro Machining Technologies", 14th International Conference on Machine Design and Production, Cyprus

  • Çetin, B., Bayer, O. (2010). "Evaluation of Nusselt number for a flow in a microtube with constant heat flux including axial conduction, viscous dissipation and second-order slip model", The 3rd International Symposium on Nonlinear Dynamics (ISND 2010), September 25-28, Shanghai, China

  • Yildiz, Y., Kolmanovsky, I. (2010). "Implementation of CAPIO for Composite Adaptive Control of Cross-Coupled Unstable Aircraft", AIAA Infotech@Aerospace(AIAA Paper 2011-1460)

  • Yildiz, Y. (2010). "Adaptive Control For Time Delay Systems Applied To Flight Control", AIAA Guidance, Navigation, and Control Conference(AIAA Paper 2010-7576)

  • Yildiz, Y., Kolmanovsky, I. (2010). "Stability properties and cross coupling performance of the control allocation scheme CAPIO", AIAA Infotech@Aerospace(AIAA Paper 2010-347)

  • Yildiz, Y., Kolmanovsky, I. (2010). "A Control Allocation Technique to Recover From Pilot Induced Oscillations (CAPIO) Due To Actuator Rate Limiting", American Control Conference p.516-523

  • Özcan, O., Wang, H., Taylor, J., Sitti, M. (2010). "Surface Tension Driven Water Strider Robot using Circular Footpads", ICRA’10. IEEE International Conference on Robotics and Automation p.3799-3804, Anchorage, AK, USA

  • 2009

  • Li, S., Çakmakcı, M., Kolmanovsky, I.V., Ulsoy, A. (2009). "Throttle Actuator Swapping Modularity Design for Idle Speed Control", American Control Conference, 06/2009, St. Louis, Missouri, USA

  • Çakmakcı, M., Ulsoy, A.G. (2009). "Combined Component Swapping Modularity for a VCT Engine Controller", Dynamic Systems and Control Conference, 10/2009

  • Bulut, B., Barbaros Çetin,, Yazıcıoğlu, A., Kakaç, S. (2009). "Finite element analysis of gaseous flow in microchannels with axial conduction", 17th National Conference on Thermal Sciences p.308-314, June 24-27, Sivas, Turkey

  • Önal, Ç.D., Özcan, O., Sitti, M. (2009). "Automated 2-D Nanoparticle Manipulation with an Atomic Force Microscope", ICRA’09. IEEE International Conference on Robotics and Automation p.1814-1819, Kobe, Japan

  • 2008

  • Zhao, Y., Yan, Z., Malik, A., Blankenship, J., Çakmakcı, M. (2008). "Development of a Hardware-In-The-Loop System for a Hybrid Powertrain Vehicle Control", SAE Global Powertrain Congress, 10/2008, Chicago, USA

  • Çetin, B., Li, D. (2008). "Microfluidic continuous particle separation via AC-DEP with 3D electrodes", ASME International Mechanical Engineering Congress and Exposition (IMECE'08) p.217-222, October 31-November , Boston, MA, USA

  • Baytaroğlu, Ş., Altan, A. (2008). "The Development of Metrology and its Contributions to National Economy in Turkey", 1st International Symposium RMO 2008 – Regional Metrology Organization, November, Dubrovnik-Croatia

  • Yildiz, Y., Annaswamy, A., Yanakiev, D., Kolmanovsky, I. (2008). "Automotive Powertrain Control Problems Involving Time Delay: An Adaptive Control Approach", ASME Dynamic Systems and Control Conference (BEST STUDENT PAPER AWARD) p.1421-1428

  • Yildiz, Y., Annaswamy, A., Yanakiev, D., Kolmanovsky, I. (2008). "Adaptive Air Fuel Ratio Control for Internal Combustion Engines", American Control Conference p.2058-2063

  • 2007

  • Çakmakcı, M., A.G. Ulsoy, (2007). "Design of Modular Controllers for Systems with Smart Networked Components", 4th Int. Conf. on Design and Production of Machines and Dies/Molds, Çeşme, İzmir

  • Çetin, B., Li, D. (2007). "Modeling and simulation of 2D, EOF in a slit channel with Joule heating effect", 16th National Conference on Thermal Sciences, May 30-June 2, Kayseri, Turkey

  • Bulut, B., Çetin, B., Yazıcıoğlu, A.G., Yuncu, H., Kakaç, S. (2007). "The analysis of the effect of axial conduction on single-phase convective heat transfer in microtubes", 16th National Conference on Thermal Sciences, May 30-June 2, Kayseri, Turkey

  • Yildiz, Y., Annaswamy, A., Yanakiev, D., Kolmanovsky, I. (2007). "Adaptive Idle Speed Control for Internal Combustion Engines", American Control Conference p.3700-3705

  • 2006

  • Çakmakcı, M., A.G. Ulsoy, (2006). "Improving Component Swapping Modularity using Bi-directional Communication in Networked Control Systems", Proc. Int. Symposium on Flexible Automation

  • Süer, S., Baytaroğlu, Ş. (2006). "Infrastructure for Scientific Metrology in Turkey", CAMET-JM, 4-6 April , Casablanca, Morocco

  • Koçaş, I., Baytaroğlu, S., Hamarat, A. (2006). "Present and Future of Pressure Metrology in Turkey", CAMET-JM 2006, 4-6 April, Casablanca, Morocco.

  • 2005

  • Çakmakcı, M., A.G. Ulsoy, (2005). "Bidirectional Communication Among "Smart" Components in a Networked Control System", Proc. American Control Conference, June, Portland, OR,

  • Çetin, B., Yuncu, H., Kakaç, S. (2005). "Single-phase convective heat transfer in microtubes", 15th National Conference on Thermal Sciences, September 7-9, Trabzon, Turkey

  • 2004

  • Çınar, F., Turaman, Ö., Baytaroğlu, Ş. (2004). "Lastik Tekerlekli Zırhlı Araçların Akustik ve Termal İzi", SAVTEK, Haziran, ODTÜ, Ankara

  • Çınar, F., Turaman, Ö., Baytaroğlu, Ş. (2004). "NATO Şalterlerin Tasarım Kriterleri", SAVTEK, Haziran, ODTÜ, Ankara

  • Çınar, F., Turaman, Ö., Baytaroğlu, Ş. (2004). "Yeni nesil 4x4 Lastik Tekerli Zırhlı Araçlar", SAVTEK, Haziran, ODTÜ, Ankara

  • 2003

  • Bayer, O., Çetin, B., Dirgin, E. (2003). "COP-Irreversibility relation in household refrigerators", 14th National Conference on Thermal Sciences, September, 3-5, Isparta, Turkey

  • Başıbüyük, Y., Kılıc, S.E., Anlağan, Ö. (2003). "A Study on Quality Control System Implementation in a Distributed Manufacturing Environment", WESIC 2003 (4th Workshop on European Scientific and Industrial Collaboration) p. 465-472, Miskolc, Hungary

  • Akalp, M., Şen, D., Anlağan, Ö., Kılıç, S. (2003). "Development of a Web-Based Job-Shop Scheduling System", WESIC 2003, 4th Workshop on European Scientific and Industrial Collaboration, 28-30 Mayıs, Miskolc-Lillafüred, Hungary

  • Baytaroğlu, Ş., Türkoğlu, H., Çınar, F. (2003). "Reduction of the Thermal Signature of Wheeled Armored Vehicle", NATO AVT 100 Symposium, October, Warsaw-Poland

  • 2002

  • Basibüyük, Y., Sari, B., Kilic, S., Anlagan, Ö. (2002). "Agent-Based Shop Floor Control System Using Windows-DNA Technology", Proc. of UMTIK-2002, Ürgüp, Turkey

  • Bilkay, O., Anlagan, Ö., Kilic, S. (2002). "Part Type Selection Using Fuzzy Logic", Proc. of UMTIK-2002, Ürgüp, Turkey

  • Sari, B., Kilic, S., Anlagan, Ö., Sen, T. (2002). "Web Based Optimization Systems for Machining Operations", Proc. of UMTIK-2002, Ürgüp, Turkey

  • 2001

  • Sari, B., Anlagan, Ö., Kilic S.E., (2001). "An Optimization System For Milling and Turning Operations Based On Windows DNA Architecture", XII Workshop on Supervising and Diagnostics of Machining Systems p.24-34, 18th – 23rd March, Karpacz

  • 2000

  • Çakmakcı, M., Ulsoy, A.G. (2000). "Quantification of Coupling for Modular Design Problems", Japan-USA Symposium on Flexible Automation, 07/2000, Ann Arbor

  • Unver, H., Anlagan, Ö., Kilic, S., Cangar, T. (2000). "A Structured Methodology for Development of Heterarchical Control Software for Manufacturing Cells using Windows-DNA", IASTED Conference on Intelligent Systems and Control (ISC 2000), Hawaii, USA

  • Unver H.O., T. B., Anlagan, Ö., Kilic, S. (2000). "Design and Development of a Distributed Shop Floor Control System Using Windows-DNA", 27th International Conference on Computers & Industrial Engineering, Bejing, China

  • Cangar, T. U.H., Anlagan, Ö., O., K. S.E. . (2000). "Agent Based Flexible Manufacturing Cell Framework: A Pilot Implementation", 11th DAAM International Symposium, Crotia

  • Cangar, T., Ünver H. O.,, Anlagan, Ö., Kilic, S.E. (2000). "A Hierarchical Manufacturing Execution System Framework", Proc. of UMTIK-2000 ME, METU, Ankara

  • Ünver, H.O., Durak, U., Anlagan, Ö., Kilic, S.E. (2000). "Conceptual Design of Gage and Fixture Tracking System", Proc. of UMTIK-2000, ME, METU, Ankara

  • Basibüyük, Y., Anlagan, Ö. (2000). "A shop floor quality control system: METUCIM-IQ ", Proc. of UMTIK-2000, ME, METU, Ankara

  • 1997

  • Basibuyuk, Y., Unver, O., Anlagan, Ö. (1997). "A Survay on CAD/CMM Integration", International Computer Science Conference, Miskolc/Hungary

  • Erkmen, A., Erbudak, M., Unver, O., Anlagan, Ö. (1997). "Genetically Tuned Fuzzy Scheduling for Flexible Manufacturing Systems", IEEE International Conference on Robotics and Automation, Albuquerque, New Mexico, USA

  • Hashemipour, M. D. D. T. C., Anlagan, Ö. (1997). "A Prototype Computer Supported Information Analysys Tool (COMSIRA)", 1997 ASME Design Engineering Technical Conferences, September 14-17, Sacramento, California, USA.

  • 1995

  • Baytaroğlu, Ş., Özbay, H., Fank, S. (1995). "Çekme Basma Test Makinalarında Kalibrasyonun Önemi", I. Ulusal Ölçümbilim Kongresi, Ekim , Eskişehir

  • Tiftikçi, K., Baytaroğlu, Ş. (1995). "1m’ye Kadar Ölçme Bloğu Kalibrasyonu ve Sıcaklığın Ölçüm Sonuçları Üzerindeki Etkisi", I. Ulusal Ölçümbilim Kongresi, Ekim, Eskişehir

  • Baytaroğlu, Ş., Özbay, H., Fank, S. (1995). "Kuvvet Standardının Oluşturulması ve Sanayiye Transferi", I.Ulusal Ölçümbilim Kongresi, Ekim, Eskişehir

  • 1988

  • Tohumcu, M., Ertan, H. (1988). " “Prediction of Performance of Switched Reluctance Motor For Design Purposes”", ICEM 88, International Conference on Electrical Machines, 12-14 September , Pisa-Italy

  • Ertan, H., Tohumcu, M. (1988). "A Method For Optimum Design of Switched Reluctance Motors", ICEM 88, International Conference on Electrical Machines, 12-14 September, Pisa-Italy

  • 1981

  • Arıkan, C., Tohumcu, M. (1981). "A Fully Transistorized Constant Torque D.C. Drive and Its Dynamical Analysis", 4th Power Electronics Conference p. p.275-285., 19-24 October, Budapest

Kitap Bölümleri

    2017

  • Baykara, M.Z., Schwarz, U. (2017). "Atomic Force Microscopy: Methods and Applications", Encyclopedia of Spectroscopy and Spectrometry (3rd Ed.), Elsevier p.70-75

  • Baykara, M.Z., Morgenstern, M., Schwarz, A., Schwarz, U. (2017). "Low-Temperature Scanning Probe Microscopy", Handbook of Nanotechnology (4th Ed.), Springer p.769-808

  • Çetin, B., Güler, K.G., Aksel, M.H. (2017). "Computational modeling of vehicle radiators using porous medium approach", Heat Exchangers -- Design, Experiment and Simulation (Edited by Prof. S. M. Sohel Murshed, Prof. M. L. S. Matos Lopes), InTech p.243–262

  • Çakmakcı, M., Kızıltaş-Şendür, G., Durak, U. (2017). "Simulation-Based Engineering", Guide to Simulation-Based Disciplines / Springer Publications, July

  • 2016

  • Çetin, B., Yıldırım, E., Akay, Ş. (2016). "Mikroakışkan Sistemlerin Üretimi", Mikroakışkan Teknolojilerin Temelleri ve Uygulamaları (Edited by Assoc. Prof. Ö. Yeşil-Çeliktaş), Ege Üniversitesi Yayınevi (In Turkish)

  • Yavuz, C., Çetin, B., Yeşil-Çeliktaş, Ö. (2016). "Mikroakışkan Sistemlerin Sterilizasyonu", Mikroakışkan Teknolojilerin Temelleri ve Uygulamaları (Edited by Assoc. Prof. Ö. Yeşil-Çeliktaş), Ege Üniversitesi Yayınevi (In Turkish)

  • Yeşil-Çeliktaş, Ö., Çetin, B., Yıldırım, E. (2016). "Mikroakışkan Sistemlere Yönelik Gelecek Tahminleri", Mikroakışkan Teknolojilerin Temelleri ve Uygulamaları (Edited by Assoc. Prof. Ö. Yeşil-Çeliktaş), Ege Üniversitesi Yayınevi (In Turkish)

  • 2015

  • Çetin, B., Zeinali, S., Li, D. (2015). "Magnetic Pumps", Encyclopedia of Micro and Nanofluidics (2nd Edition) p.1690-1695

  • Çetin, B., Zeinali, S., Li, D. (2015). "Microfluidic Optical Devices", Encyclopedia of Micro and Nanofluidics (2nd Edition), Springer p.1980-1984

  • Çetin, B., Salemmilani, R., D. Li, (2015). "Ultrasonic pumps", Encyclopedia of Micro and Nanofluidics (2nd Edition), Springer, p.3394-3397

  • Çetin, B., Salemmilani, R., Li, D. (2015). "Microfluidic Rotary Pump", Encyclopedia of Micro and Nanofluidics (2nd Edition), Springer, p.2000-2004

  • Çetin, B., Taze, S., Li, D. (2015). "Methods for Pressure Measurements", Encyclopedia of Micro and Nanofluidics (2nd Edition), Springer, p.2828-2834

  • Büyükkoçak, S., Özer, M.B., Çetin, B. (2015). "Microscale Acoustofluidics", Encyclopedia of Micro and Nanofluidics (2nd Edition), Springer, p.2149-2158

  • Baykara, M.Z. (2015). "Noncontact Atomic Force Microscopy for Atomic-Scale Characterization of Material Surfaces", Surface Science Tools for Nanomaterials Characterization, Springer p.273-316

  • Çetin, B., Li, D. (2015). "Temperature Gradient Generation and Control", Encyclopedia of Micro and Nanofluidics (2nd Edition), Springer, p.3225-3227

  • Baykara, M.Z., Schwarz, U. (2015). "3D Force Field Spectroscopy", Noncontact Atomic Force Microscopy (vol. 3), Springer p.9-28

  • Çetin, B., Baranoğlu, B. (2015). "Boundary-Element Method in Microfluidics", Encyclopedia of Micro and Nanofluidics (2nd Edition), Springer, p.202-213

  • 2014

  • A. Akay and A. Carcaterra "Damping Mechanisms”, (2014). "Active and Passive Vibration Control of Structures, (P. Hagedorn and G. Spelsberg-Korspeter, Eds., CISM International Centre for Mechanical Sciences) ", Springer p.259 – 299

  • 2013

  • Davydov, D., Javili, A., Steinmann, P., McBride, A. (2013). "Surface Effects in Solid Mechanics: A comparison of atomistic and surface enhanced continuum approaches at finite temperature", Springer

  • 2012

  • Steinmann, P., Javili, A. (2012). "IUTAM Symposium on Surface Effects in the Mechanics of Nanomaterials and Heterostructures: Computational thermomechanics with boundary structures", Springer

  • 2008

  • Çetin, B., Li, D. (2008). "Ultrasonic pumps", Encyclopedia of Micro and Nanofluidics (1st Edition), Springer, p.2128-2129

  • Çetin, B., Li, D. (2008). "Microfluidic Optical Devices", Encyclopedia of Micro and Nanofluidics (1st Edition), Springer, p.1186-1187

  • Çetin, B., Li, D. (2008). "Magnetic Pumps", Encyclopedia of Micro and Nanofluidics (1st Edition), Springer, p.1040-1043

  • Çetin, B., Li, D. (2008). "Methods for Pressure Measurements", Encyclopedia of Micro and Nanofluidics (1st Edition), Springer, p.1743-1745

  • Çetin, B., Li, D. (2008). "Temperature Gradient Generation and Control", Encyclopedia of Micro and Nanofluidics (1st Edition), Springer, p.1993-1994

  • Çetin, B., Li, D. (2008). "Microfluidic Rotary Pump", Encyclopedia of Micro and Nanofluidics (1st Edition), Springer, p.1188-1189

Master Tezleri

    2017

  • Alper Özoğul (Advisor: Mehmet Z. Baykara), (2017). "Investigation of Structural Lubricity on Platinum Nanoparticles under Ambient Conditions", Bilkent University, Department of Mechanical Engineering, Ankara, Turkey

  • Tarek Abdelwahab (Advisor: Mehmet Z. Baykara), (2017). "Genetically-Tunable Morphology and Mechanical Properties of Bacterial Functional Amyloid Nanofibers", Bilkent University, Department of Mechanical Engineering, Ankara, Turkey

  • Reza Rasooli (Advisor: Asst. Prof. Dr. Barbaros Çetin), (2017). "Modeling of inertial particle flow and entry gas flow in micro-channels", Bilkent University, Mechanical Engineering Department, Ankara, Turkey

  • Berkin Uluutku (Advisor: Mehmet Z. Baykara), (2017). "Modeling of NC-AFM Experiments by the Utilization of Molecular Dynamics and the Harmonic Oscillator Model", Bilkent University, Department of Mechanical Engineering, Ankara, Turkey

  • Hossein Alijani Alijanvad (Advisor: Asst. Prof. Dr. Barbaros Çetin), (2017). "Thermal performance characterization of flat grooved heat pipes", Bilkent University, Mechanical Engineering Department, Ankara, Turkey

  • Gamze Düven (Co-supervisor: Asst. Prof. Dr. Barbaros Çetin), (2017). "Implementation of a microfluidic device for the determination of microbial load of milk", Ege University, Department of Food Engineering, İzmir, Turkey

  • 2016

  • Arda Balkancı (Advisor: Mehmet Z. Baykara), (2016). "Influence of Interface Structure on the Nanotribological Properties of Exfoliated Graphene", Bilkent University, Department of Mechanical Engineering, Ankara, Turkey

  • 2015

  • Ebru Cihan (Advisor: Mehmet Z. Baykara), (2015). "Structure and Nanotribology of Thermally Deposited Gold Nanoparticles on Graphite", Bilkent University, Institute of Materials Science & Nanotechnology, Ankara, Turkey

  • Tuna Demirbaş (Advisor: Mehmet Z. Baykara), (2015). "Nanotribological Properties of Graphene Grown by Chemical Vapor Deposition and Transferred Onto Silicon Oxide Substrates", Bilkent University, Department of Mechanical Engineering, Ankara, Turkey

  • Gizem Bedir (Co-advisor: Asst. Prof. Dr. Barbaros Çetin), (2015). "Forward problem of electrocardiography in terms of transmembrane potentials within 3D heart ", METU Electrical and Electronics Engineering Department, Ankara, Turkey

  • Serdar Taze (Advisor: Asst. Prof. Dr. Barbaros Çetin), (2015). "Modeling and fabrication of silicon micro-grooved heat pipes", Bilkent University, Mechanical Engineering Department, Ankara, Turkey

  • 2014

  • Kadir G. Güler (Co-advisor: Asst. Prof. Dr. Barbaros Çetin), (2014). "Computational modeling of fin-and-tube type vehicle radiators based on porous medium approach", METU, Department of Mechanical Engineering, Ankara, Turkey

  • Soheila Zeinali (Advisor: Asst. Prof. Dr. Barbaros Çetin), (2014). "Microfluidic device with 3D electrode structure for high throughput dielectrophoretic applications", Bilkent University, Mechanical Engineering Department, Ankara, Turkey

  • 2013

  • A. Koray Koska (Advisor: Asst. Prof. Dr. Barbaros Çetin), (2013). "Injection molding of polymeric microfluidic devices", Bilkent University, Mechanical Engineering Department, Ankara, Turkey

  • 2012

  • S. Berat Çelik (Co-advisor: Asst. Prof. Dr. Barbaros Çetin), (2012). "Analysis of single phase fluid flow and heat transfer in slip-flow regime by parallel implementation of Lattice-Boltzmann Method on GPUs", METU, Department of Mechanical Engineering, Ankara, Turkey

  • 2005

  • Cetin, B. (2005). "Analysis of Single Phase Convective Heat Transfer in Microtubes and Microchannels", METU, Department of Mechanical Engineering, Ankara, Turkey

Doktora Tezleri

    2017

  • Mehmet Doğan Aşık (Co-supervisor: Asst. Prof. Dr. Barbaros Çetin), (2017). "Design and fabrication of a novel microfluidic device for the synthesis of bio-polimeric nanoparticles", Hacettepe University, Nanotechnology and Nanomedicine, Ankara, Turkey

  • 2012

  • Mehmet Z. Baykara, (2012). "Atomic-Resolution Quantification of Chemical Interactions Using Three-Dimensional Atomic Force Microscopy", Yale University, Graduate School of Arts & Sciences, New Haven, CT, USA

  • Özcan, O. (2012). "Tip Based Automated Nanomanipulation using Scanning Probe Microscopy", Carnegie Mellon University, Pittsburgh, PA, USA

  • 2009

  • Çetin, B. (2009). "Microfluidic Continuous Separation of Particles and Cells by using AC-Dielectrophoresis", Vanderbilt University, Department of Mechanical Engineering, Nashville, TN, USA

Patentler

    2015

  • Baykara, M.Z.. "Material System with Sub-Micrometer-Scale Interfaces Exhibiting Structural Lubricity under Ambient Conditions and the Method for Synthesis Thereof (Republic of Turkey Patent Application, 2015/07405)"

  • Baykara, M.Z.. "Material System with Sub-Micrometer-Scale Interfaces Exhibiting Structural Lubricity under Ambient Conditions and the Method for Synthesis Thereof (USPTO Application, 1495300)"

  • 2013

  • Roukes, M., Hanay, S., Kelber, S., Naik, A.. "Single-Protein Nanomechanical Mass Spectrometry in Real Time (US Patent Application filed on 9 May 2013, CIT-6192-P, 2012)"

  • 2012

  • Roukes, M., Naik, A., Hanay, S.. "Single Molecule Mass Spectrometry Enabled by Nanoelectromechanical Systems (NEMS-MS), US Patent # 8,227,747"

Raporlar

    2014

  • Acosta, D., Yildiz, Y., Klyde, D. (2014). "Avoiding Pilot-Induced Oscillations in Energy-Efficient Aircraft Designs", The Impact of Control Technology, IEEE Control Systems Society

Comments are closed.