DEVELOPMENT OF AN ACOUSTIC VECTOR SENSOR USING MICRO-MANUFACTURING TECHOLOGIES

Devam Eden Proje

Meteksan Savunma A.Ş. (www.meteksan.com]

Development of an Acoustic Vector Sensor using Micro-Manufacturing Techologies

RELATED PUBLICATIONS

  • Gecer-Ulu, N., Ulu, E., Çakmakcı, M. (2016). "Design and Analysis of A Modular Learning Based Cross-Coupled Control Algorithm for Multi-Axis Precision Positioning Systems", International Journal of Control Automation and Systems, v.14(1), DOI: http://dx.doi.org/10.1007/s12555-014-0125-1
  • Dokuyucu, H.I., Çakmakcı, M. (2016). "Concurrent Design of Energy Management and Vehicle Traction Supervisory Control Algorithms for Parallel Hybrid Electric Vehicles", IEEE Transactions on Vehicular Technology, v.65(2), Abstract, DOI: http://dx.doi.org/10.1109/TVT.2015.2405347
  • Erva Ulu,, Nurcan Gecer-Ulu,, Çakmakcı, M. (2014). "Development and Validation of an Adaptive Method to Generate High-Resolution Quadrature Encoder Signals", Journal Dynamic Systems Measurement and Control, v.136(3) p.034503
  • Çakmakcı, M., Ulsoy, A.G. (2011). "Swappable Distributed MIMO Controller for a VCT Engine", IEEE Transactions on Control Systems Technology, v.19(5) p.1168-1177
  • Çakmakcı, M., Ulsoy, A. (2009). "Improving Component Swapping Modularity using Bi-directional Communication in Networked Control Systems", IEEE/ASME Transactions on Mechatronics, v.14(3) p.307-319
  • Karpat, Y., Çakmakcı, M., Ali, Z., Türeyen, E.B. (2016). "Fabrication of Polymer Micro Needles for Transdermal Drug Delivery System Using DLP Based Projection Stereo-lithography", Procedia CIRP, v.42 p.87-90
  • Emre Akgün,, Çakmakcı, M. (2012). "Development of a Supervisory Controller for Residential Energy Management Problems", Proc. of the American Control Conference (ACC), Abstract
  • Dokuyucu, H.I., Çakmakcı, M. (2012). "Concurrent Design of Energy Management and Vehicle Stability Algorithms for a Parallel Hybrid Vehicle using Dynamic Programming", Proc. of the American Control Conference (ACC), Abstract
  • Çakmakcı, M., Li, Y., Liu, S. (2011). "Model-in-the-Loop Development for Fuel Cell Vehicle", Proc. of the American Control Conference (ACC), Abstract
  • Çakmakcı, M., Ulsoy, A.G. (2009). "Combined Component Swapping Modularity for a VCT Engine Controller", Dynamic Systems and Control Conference
  • Li, S., Çakmakcı, M., Kolmanovsky, I.V., Ulsoy, A. (2009). "Throttle Actuator Swapping Modularity Design for Idle Speed Control", American Control Conference, Abstract
  • Zhao, Y., Yan, Z., Malik, A., Blankenship, J., Çakmakcı, M. (2008). "Development of a Hardware-In-The-Loop System for a Hybrid Powertrain Vehicle Control", SAE Global Powertrain Congress
  • Çakmakcı, M., A.G. Ulsoy (2007). "Design of Modular Controllers for Systems with Smart Networked Components", 4th Int. Conf. on Design and Production of Machines and Dies/Molds
  • Çakmakcı, M., A.G. Ulsoy (2006). "Improving Component Swapping Modularity using Bi-directional Communication in Networked Control Systems", Proc. Int. Symposium on Flexible Automation
  • Çakmakcı, M., A.G. Ulsoy (2005). "Bidirectional Communication Among ''Smart'' Components in a Networked Control System", Çakmakcı, M., A.G. Ulsoy, (2005)., Abstract
  • Çakmakcı, M., Ulsoy, A.G. (2000). "Quantification of Coupling for Modular Design Problems", Japan-USA Symposium on Flexible Automation
  • Çakmakcı, M., Kızıltaş-Şendür, G., Durak, U. (2017). "Simulation-Based Engineering", Guide to Simulation-Based Disciplines / Springer Publications, DOI: http://dx.doi.org/10.1007/978-3-319-61264-5_3
  • Oliaei, S., Karpat, Y. (2017). "Built-up edge effects on process outputs of titanium alloy micro milling", Precision Engineering (in press)
  • Oliaei, S., Karpat, Y. (2017). "Investigating the influence of friction conditions on finite element simulation of micro scale machining with the presence of built-up edge", The International Journal of Advanced Manufacturing Technology (in press)
  • Karpat, Y., Oliaei, S.N. (2016). "Influence of tool wear on machining forces and tool deflections during micro milling", The International Journal of Advanced Manufacturing Technology, v.84 p.1963-1980
  • Karpat, Y., Oliaei, S.N. (2016). "Investigating the influence of built-up edge on forces and surface roughness in micro scale orthogonal machining of titanium alloy Ti6Al4V", Journal of Materials Processing Technology, v.235 p.28-40
  • Karpat, Y., Bahtiyar, O. (2015). "Tool geometry based prediction of critical thrust force while drilling carbon fiber reinforced polymers", Advances in Manufacturing, v.3 p.300-308
  • Zeinali, S., Çetin, B., Oliaei, S., Karpat, Y. (2015). "Fabrication of continuous flow microfluidics device with 3D electrode structures for high throughput DEP applications using mechanical machining", Electrophoresis, Special Issue on Dielectrophoresis, v.36(13) p.1432-1442, DOI: http://onlinelibrary.wiley.com/doi/10.1002/elps.201400486/full
  • Oliaei, S., Özdemir, C., Karpat, Y. (2014). "Fabrication of Micro Ball End Mills Using Micro Electro Discharge Machining", Int. J. of Mechatronics and Manufacturing Systems
  • Karpat, Y., Değer, B., Bahtiyar, O., Kaftanoğlu, B. (2014). "A Mechanistic Approach to Investigate Drilling of UD-CFRP Laminates with PCD Drills", CIRP Annals – Manufacturing Technology, v.63
  • Karpat, Y., Değer, B., Bahtiyar, O. (2014). "Experimental Evaluation of Polycrystalline Diamond Tool Geometries while Drilling Carbon Fiber Reinforced Plastics", Journal of Advanced Manufacturing Technology, v.71/5 p.1295-1307
  • Karpat, Y., Polat, N. (2013). "Mechanistic force modeling for milling of carbon fiber reinforced polymers with double helix tools", CIRP Annals- Manufacturing Technology, v.62 p.95-98
  • Karpat, Y., Değer, B., Bahtiyar, O. (2012). "Mechanistic Force Modeling for Milling of Unidirectional Carbon Fiber Reinforced Polymer Laminates", International Journal of Machine Tools and Manufacture, v.56 p.79
  • Karpat, Y., Değer, B., Bahtiyar, O. (2012). "Drilling Thick Fabric Woven CFRP Laminates with Double Point Angle Tools", Journal of Materials Processing Technology, v.212 p.2117
  • Karpat, Y. (2011). "Temperature Dependent Flow Softening of Titanium Alloy Ti6Al4V: An Investigation Using Finite Element Simulation Of Machining", Journal of Materials Processing Technology, v.211 p.737
  • Karpat, Y. (2010). "A Modified Material Model for the Finite Element Simulation of Machining Titanium Alloy Ti6Al4V", Machining Science and Technology, v.14 p.390
  • Karpat, Y. (2009). "Investigation of the Effect of Cutting Tool Edge Radius on Material Separation due to Ductile Fracture in Machining", International Journal of Mechanical Sciences, v.51 p.541
  • Karpat, Y., Özel, T. (2008). "Mechanics of High Speed Cutting with Curvilinear Edge Tools", International Journal of Machine Tools and Manufacture, v.48 p.195
  • Karpat, Y., Özel, T. (2008). "Analytical and Thermal Modeling of High-Speed Machining with Chamfered Tools", ASME Journal of Manufacturing Science and Engineering, v.130 p.011001
  • Özel, T., Karpat, Y., Srivastava, A. (2008). "Hard Turning with Variable Micro-Geometry PcBN Tools", CIRP Annals, v.57 p.73
  • Karpat, Y., Özel, T. (2007). "Multi-Objective Optimization For Turning Processes Using Neural Network Modeling And Dynamic-Neighborhood Particle Swarm Optimization", International Journal of Advanced Manufacturing Technology, v.35 p.234
  • Özel, T., Karpat, Y. (2007). "Identification of Constitutive Material Model Parameters for High-Strain Rate Metal Cutting Conditions Using Evolutionary Computational Algorithms", Materials and Manufacturing Processes, v.22 p.659
  • Özel, T., Karpat, Y., Figueira, L., Davim, J. (2007). "Modeling of Surface Finish and Tool Wear in Hard Turning of AISI D2 Steel Using Ceramic Wiper Inserts", Journal of Materials Processing Technology, v.189 p.192
  • Karpat, Y., Özel, T. (2006). "Predictive Analytical and Thermal Modeling of Orthogonal Cutting Process. Part I: Predictions of Tool Forces, Stresses and Temperature Distributions", ASME Journal of Manufacturing Science and Engineering, v.128 p.435
  • Karpat, Y., Özel, T. (2006). "Predictive Analytical and Thermal Modeling of Orthogonal Cutting Process. Part II: Effect of Tool Flank Wear on Tool Forces, Stresses and Temperature Distributions", ASME Journal of Manufacturing Science and Engineering, v.128 p.445
  • Özel, T., Karpat, Y. (2005). "Predictive Modeling of Surface Roughness and Tool Wear in Hard Turning using Regression and Neural Networks", International Journal of Machine Tools and Manufacture, v.45 p.467
  • Karpat, Y., Bahtiyar, O. (2016). "Energy Based Investigation of Process Parameters While Drilling Carbon Fiber Reinforced Polymers", Procedia CIRP, v.46 p.59-62
  • Karpat, Y., Çakmakcı, M., Ali, Z., Türeyen, E.B. (2016). "Fabrication of Polymer Micro Needles for Transdermal Drug Delivery System Using DLP Based Projection Stereo-lithography", Procedia CIRP, v.42 p.87-90
  • Karpat, Y., Oliaei, S.N. (2016). "Fabrication of PCD Mechanical Planarization Tools by Using μ-Wire Electrical Discharge Machining", Procedia CIRP, v.42 p.311-316
  • Karpat, Y., Bahtiyar, O. (2015). "Comparative analysis of PCD drill designs during drilling of CFRP laminates", Procedia CIRP, v.31 p.316-321
  • Oliaei, S., Karpat, Y. (2014). "Experimental Investigations on Micro Milling of Stavax Stainless Steel", CIRP High Performance Cutting Conference
  • Oliaei, S., Özdemir C.,, Karpat, Y. (2013). "Fabrication of Micro Ball End Mills Using Micro Electro Discharge Machining", 7th International Conference And Exhibition on Design and Production of Machines and Dies/Molds
  • Karpat, Y., Değer, B. B. O. (2012). "Mechanistic Force Modeling for Milling of Unidirectional Carbon Fiber Reinforced Polymer (CFRP) Laminates", 5th CIRP Conference on High Performance Cutting, Zurich
  • Korkmaz, E., Karpat, Y., Filiz, S. (2010). "Recent Developments in Micro Machining Technologies", 14th International Conference on Machine Design and Production