RELATED PUBLICATIONS

2019

    Journal Paper
  • Atay, A., Sarıarslan, B., Kuşcu, Y.F., Akkuş, Y., Saygan, S., Gürer, T., Çetin, B., Dursunkaya, Z. (2019). "Experimental dryout characterization of commercial sintered and grooved heat pipes", J. Thermal Science & Technology (In press)
  • S. Firooz, G. Chatzigeorgiou, F. Meraghni, A. Javili (2019). "Bounds on size effects in composites via homogenization accounting for general interfaces, Continuum Mechanics and Thermodynamics", DOI: 10.1007/s00161-019-00796-w
  • Özcan, M., Çakmakcı, M., Temizer, İ. (2019). "Smart Composites with Tunable Stress-Strain Curves", Computational Mechanics (in press), DOI: http://dx.doi.org/10.1007/s00466-019-01773-5
  • M Yuksel, E Orhan, C Yanik, AB Ari, A Demir, MS Hanay (2019). "Nonlinear Nanomechanical Mass Spectrometry at the Single-Nanoparticle Level", Nano Letters, v.19 p.3583-3589, Full Text, DOI: https://doi.org/10.1021/acs.nanolett.9b00546
  • Firooz, S., Chatzigeorgiou, G., Meraghni, F., Javili, A. (2019). "Homogenization accounting for size effects in particulate composites due to general interfaces", Mechanics of Materials, v.139 p.103204, DOI: https://doi.org/10.1016/j.mechmat.2019.103204
  • Akkuş, Y., Çetin, B., Dursunkaya, Z. (2019). "An iterative solution approach to coupled heat and mass transfer in a steadily fed evaporating water droplet", J. Heat Transfer, v.141(2) p.031501
  • Javili, A., Morasata, R., Oterkus, E., Oterkus, S. (2019). "Peridynamics review", Mathematics and Mechanics of Solids, v.24 p.3714-3739, DOI: https://doi.org/10.1177/1081286518803411
  • S. Firooz, A. Javili (2019). "Understanding the role of general interfaces in the overall behavior of composites and size effects, Computational Materials Science", v.162 p.245-254
  • Çakal, B.A., Temizer, İ., Terada, K., Kato, J. (2019). "Microscopic Design and Optimization of Hydrodynamically Lubricated Dissipative Interfaces", International Journal for Numerical Methods in Engineering, v.120 p.153-178, DOI: http://dx.doi.org/10.1002/nme.6129
  • Nishi, S., Terada, K., Temizer, İ. (2019). "Isogeometric analysis for numerical plate testing of dry woven fabrics involving frictional contact at meso-scale", Computational Mechanics, v.64 p.211-229, DOI: http://dx.doi.org/10.1007/s00466-018-1666-6
  • Javili, A., Bakiler, A.D. (2019). "A displacement-based approach to geometric instabilities of a film on a substrate", Mathematics and Mechanics of Solids, v.24 p.2999-3023, DOI: https://doi.org/10.1177/1081286519826370
  • S. Firooz, S. Saeb, G. Chatzigeorgiou, F. Meraghni, P. Steinmann, A. Javili (2019). "Systematic study of homogenization and the utility of circular simplified representative volume element, Mathematics and Mechanics of Solids", DOI: 10.1177/1081286518823834
  • Firooz, S., Saeb, A., Chatzigeorgiou, G., Meraghni, F., Steinmann, P., Javili, A. (2019). "A systematic study on homogenization and the utility of circular simplified RVE.", Mathematics and Mechanics of Solids, v.24 p.2961-2985, DOI: https://doi.org/10.1177/1081286518823834
  • Javili, A. (2019). "A note on traction continuity across an interface in a geometrically non-linear framework", Mathematics and Mechanics of Solids, v.24 p.2478-2496, DOI: https://doi.org/10.1177/1081286518766980
  • Javili, A., McBride, A., Steinmann, P. (2019). "Continuum-kinematics-inspired peridynamics. Mechanical problems", Journal of the Mechanics and Physics of Solids, v.131 p.125-146, Full Text, DOI: https://doi.org/10.1016/j.jmps.2019.06.016
  • Saeb, S., Steinmann, P., Javili, A. (2019). "Designing tunable composites with general interfaces",  International Journal of Solids and Structure, v.171 p.181-188, DOI: http://dx.doi.org/10.1016/j.ijsolstr.2019.04.006
  • Firooz, S., Javili, A. (2019). "Understanding the role of general interfaces in the overall behavior of particulate composites and size effects", Computational Materials Science, v.162 p.245-254, DOI: http://dx.doi.org/10.1016/j.commatsci.2019.02.042
  • Chatzigeorgiou, G., Javili, A., Meraghni, F. (2019). "Micromechanical method for effective piezoelectric properties and electromechanical fields in multi-coated long fiber composites", International Journal of Solids and Structures, v.159 p.21-39, DOI: http://dx.doi.org/10.1016/j.ijsolstr.2018.09.018
  • Biancofiore L., Orkan M. Umurhan (2019). "Linear and nonlinear stability of a quasigeostrophic mixing layer subject to a uniform background shear", Physical Review Fluids p.013803, DOI: https://doi.org/10.1103/PhysRevFluids.4.013803
  • Rasooli, R., Çetin, B. (2019). "An extended Langhaar's solution for two-dimensional entry microchannel flows with high-order slip", Mathematics Applied to Engineering, Modelling, and Social Issues (Editors: Frank Smith, Hemen Dutta and John N. Mordeson), Springer p.189-212, Full Text, DOI: http://dx.doi.org/https://doi.org/10.1007/978-3-030-12232-4

2018

    Journal Paper
  • Karakadıoğlu, C., Özcan, O. (2018). "Accurate Modeling of Compliant Mechanism Kinematics in Foldable Miniature Robots Using Large Deflection Beam Theory", ASME Journal of Mechanisms and Robotics (Under Review)
  • Musavi, N., Manzoor, A., Yildiz, Y. (2018). "A 3D Game Theoretical Framework for the Evaluation of Unmanned Aircraft Systems Airspace Integration Concepts", Musavi, N., Manzoor, A., Yildiz, Y. (2018). (under review)
  • Alan, A., Yildiz, Y., Poyraz, U. (2018). "Adaptive Pressure Control for Use in Variable Thrust Rocket Development", IEEE Control Systems Magazine (accepted)
  • AB Ari, CM Karakan, C Yanık, II Kaya, MS Hanay (2018). "Intermodal Coupling as a Probe for Nanomechanical Modes", Physical Review Applied, v.9(034024), Full Text, DOI: https://doi.org/10.1103/PhysRevApplied.9.034024
  • Reza Rasooli,, Çetin, B. (2018). "Assessment of Lagrangian modeling of particle motion in a spiral microchannel for inertial microfluidics", Micromachines, v.9(9) p.433, Full Text
  • M Kelleci, H Aydogmus, L Aslanbas, SO Erbil, MS Hanay (2018). "Towards Microwave Imaging of Cells", Lab on a Chip, v.18(463), Full Text, DOI: 10.1039/C7LC01251A
  • Hatipoğlu, U., Çetin, B., Yıldırım, E. (2018). "A novel zero-dead-volume sample loading interface for microfluidic devices: Flexible Hydraulic Reservoir (FHR)", J. Micromech. Microeng., v.28(9) p.097001, Full Text
  • JE Sader, MS Hanay, AP Neumann, ML Roukes (2018). "Mass Spectrometry Using Nanomechanical Systems: Beyond the Point-Mass Approximation", Nano Letters, v.18 p.1608-1614, Full Text, DOI: 10.1021/acs.nanolett.7b04301
  • Oskay, Y., Çetin, B., Şerifoğlu, N., Arslan Ergül, A., Adams, M. (2018). "A novel, low-cost injection and anesthesia system for zebrafish researchers", Zebrafish, v.15(2) p.85-95, Full Text, DOI: http://dx.doi.org/doi.org/10.1089/zeb.2017.1513
  • MN Esfahani, Y. Kilinc, Y., MC Karakan, E Orhan, MS Hanay, Y Leblebici, BE Alaca (2018). "Piezoresistive Silicon Nanowire Resonators as Embedded Building Blocks in Thick SOI", Journal of Micromechanics and Microengineering, v.28(045006)
  • Cole, K., Çetin, B., Demirel, Y. (2018). "Semi-analytical source method for reaction-diffusion problem", J. Heat Transfer, v.140(6) p.061301, Full Text, DOI: http://dx.doi.org/10.1115/1.4038987
  • A Demir and MS Hanay (2018). "Numerical Analysis of Multi-Domain Systems: Coupled Nonlinear PDEs & DAEs with Noise", IEEE Transactions on CAD, v.37(7)
  • Düven, G., Çetin, B., Kışla, D. (2018). "Çip-üstü-laboratuvar teknolojisinin gıda mikrobiyolojisindeki uygulamaları (Lab-on-a-chip technology in food microbiology)", Akademik Gıda (Academic Food), v.16(1) p.78-87, Full Text, DOI: http://dx.doi.org/10.24323/akademik-gida.417895
  • Alijani, H., Çetin, B., Akkus, Y., Dursunkaya, Z. (2018). "Effect of design and operating parameters on the thermal Performance of flat grooved heat pipes", Applied Thermal Engineering, v.132 p.174-187, Full Text
  • Alijani, H., Çetin, B., Akkus, Y., Dursunkaya, Z. (2018). "Experimental thermal performance characterization of flat grooved heat pipes", Heat Transfer Engineering, v.40 p.9-10 (In Press), DOI: https://www.tandfonline.com/doi/full/10.1080/01457632.2018.1442395
  • Valizadeh, I., Steinmann, P., Javili, A. (2018). "Growth-induced instabilities of an elastic film on a viscoelastic substrate: Analytical solution and computational approach via eigenvalue analysis", Journal of Mechanics of Materials and Structures, v.13(4) p.571-585, DOI: http://dx.doi.org/10.2140/jomms.2018.13.571
  • Esmaeili, A., Steinmann, P., Javili, A. (2018). "Surface plasticity: theory and computation", Computational Mechanics, v.62 p.617-634, DOI: http://dx.doi.org/10.1007/s00466-017-1517-x
  • F Schmidt, A Magazzù, A Callegari, L Biancofiore, F Cichos, G Volpe (2018). "Microscopic engine powered by critical demixing", Physical review letters, v.120(6) p.068004, DOI: https://doi.org/10.1103/PhysRevLett.120.068004
  • Javili, A. (2018). "Variational formulation of general imperfect interfaces for finite deformation elasticity", Mathematics and Mechanics of Solids, v.23 p.1303-1322, DOI: http://dx.doi.org/10.1177/1081286517719938
  • Javili, A., Ottosen, N., Ristinmaa, M., Mosler, J. (2018). "Aspects of interface elasticity theory", Mathematics and Mechanics of Solids, v.23(7) p.1004-1024, DOI: http://dx.doi.org/10.1177/1081286517699041
  • Saeb, S., Steinmann, P., Javili, A. (2018). "Bounds on size-dependent behaviour of composites", Philosophical Magazine, v.98 p.437-463, DOI: http://dx.doi.org/10.1080/14786435.2017.1408967
  • Zabihyana, R., Mergheim, J., Javili, A., Steinmann, P. (2018). "Aspects of computational homogenization in magneto-mechanics: boundary conditions, RVE size and microstructure composition", International Journal of Solids and Structures, v.130-131 p.105--121, DOI: http://dx.doi.org/10.1016/j.ijsolstr.2017.10.009
  • Li, N., Kolmanovsky, I.V., Girard, A., Yildiz, Y. (2018). "Game Theoretic Modeling of Vehicle Interactions at Unsignalized Intersections and Application to Autonomous Vehicle Control", American Control Conference (accepted)
  • H. Dilara Uslu (Advisor: Assoc. Prof. Dr. Barbaros Çetin) (2018). "Investigation of AC electro-osmotic flow based microfluidic mixer with micro rods", Bilkent University, Mechanical Engineering Department

2017

    Journal Paper
  • Biancofiore, L., Brandt, L., Zaki, T.A. (2017). "Streak instability in viscoelastic Couette flow", Physical Review Fluids, v.2 p.043304
  • Biancofiore, L., Brandt, L., Zaki, T.A. (2017). "Streak instability in viscoelastic Couette flow", Physical Review Fluids, v.2 p.043304, DOI: http://dx.doi.org/https://doi.org/10.1103/PhysRevFluids.2.043304
  • Oliaei, S., Karpat, Y. (2017). "Built-up edge effects on process outputs of titanium alloy micro milling", Precision Engineering (in press)
  • Abdelwahab, T., Kalyoncu, E., Onur, T., Baykara, M.Z., Seker, U.O. (2017). "Genetically-Tunable Mechanical Properties of Bacterial Functional Amyloid Nanofibers", Langmuir, v.33 p.4337-4345 http://dx.doi.org/10.1021/acs.langmuir.7b00112
  • Askari, M., Karakadıoğlu, C., Ayhan, F., Özcan, O. (2017). "MinIAQ-II: A Miniature Foldable Quadruped with an Improved Leg Mechanism", IEEE ROBIO’17. IEEE International Conference on Robotics and Biomimetics p.19-25
  • Oliaei, S., Karpat, Y. (2017). "Investigating the influence of friction conditions on finite element simulation of micro scale machining with the presence of built-up edge", The International Journal of Advanced Manufacturing Technology (in press)
  • Tarek Abdelwahab (Advisor: Mehmet Z. Baykara) (2017). "Genetically-Tunable Morphology and Mechanical Properties of Bacterial Functional Amyloid Nanofibers", Bilkent University, Department of Mechanical Engineering, Full Text
  • Karakadıoğlu, C., Askari, M., Özcan, O. (2017). "Design and Operation of MinIAQ: An Untethered Foldable Miniature Quadruped with Individually Actuated Legs", IEEE AIM’17. IEEE International Conference on Advanced Intelligent Mechatronics p.247-252
  • Yücelen, T., Yildiz, Y., Sipahi, R., Yousefi, E., Nguyen, N. (2017). "Stability Limit of Human-in-the-Loop Model Reference Adaptive Control Architectures", International Journal of Control (accepted)
  • Özoğul, A., İpek, S., Durgun, E., Baykara, M.Z. (2017). "Structural Superlubricity of Platinum on Graphite under Ambient Conditions: The Effects of Chemistry and Geometry", Applied Physics Letters, v.111 p.211602 http://dx.doi.org/10.1063/1.5008529
  • Waseem, A., Guilleminot, J., Temizer, İ. (2017). "Stochastic Multiscale Analysis in Hydrodynamic Lubrication", International Journal for Numerical Methods in Engineering, v.112 p.1070-1093, DOI: http://dx.doi.org/10.1002/nme.5546
  • Li, N., Oyler, D., Zhang, M., Yildiz, Y., Kolmanovsky, I., Girard, A. (2017). "Game-Theoretic Modeling of Driver and Vehicle Interactions for Verification and Validation of Autonomous Vehicle Control Systems", IEEE Transactions on Control Systems Technology (accepted)
  • Waseem, A., Temizer, İ., Kato, J., Terada, K. (2017). "Micro-Texture Design and Optimization in Hydrodynamic Lubrication via Two-Scale Analysis", Structural and Multidisciplinary Optimization, v.56 p.227-248, DOI: http://dx.doi.org/10.1007/s00158-017-1713-5
  • Hussain, H., Yildiz, Y., Matsutani, M., Annaswamy, A.M., Lavretsky, E. (2017). "Computable Delay Margins for Adaptive Systems with State Variables Accessible", IEEE Transactions on Automatic Control, v.IEEE Transactions on Automatic Control(10) p.5039-5054
  • Yıldıran, İ.N., Temizer, İ., Çetin, B. (2017). "Homogenization in Hydrodynamic Lubrication: Microscopic Regimes and Re-Entrant Textures", Journal of Tribology, v.140 p.011701(1-19), DOI: http://doi.org/10.1115/1.4036770
  • Yildiz, Y., Unel, M. D. A.E. (2017). "Nonlinear Hierarchical Control of a Quad-Tilt-Wing UAV: An Adaptive Control Approach", International Journal of Adaptive Control and Signal Processing, v.31(9) p.1245–1264
  • Güç, A.F., Kalın, M.A., Karakadıoğlu, C., Özcan, O. (2017). "C-Quad: A Miniature, Foldable Quadruped with C-Shaped Compliant Legs", IEEE ROBIO’17. IEEE International Conference on Robotics and Biomimetics p.26-31
  • Abidi, K., Yildiz, Y., Annaswamy, A.M. (2017). "Control of Uncertain Sampled-Data Systems: An Adaptive Posicast Control Approach", IEEE Transactions on Automatic Control, v.62(5) p.2597-2602
  • Alper Özoğul (Advisor: Mehmet Z. Baykara) (2017). "Investigation of Structural Lubricity on Platinum Nanoparticles under Ambient Conditions", Bilkent University, Department of Mechanical Engineering, Full Text
  • T Kouh, MS Hanay, KL Ekinci (2017). "Nanomechanical Motion Transducers for Miniaturized Mechanical Systems", Micromachines, v.8(4) p.108
  • Askari, M., Karakadıoğlu, C., Ayhan, F., Özcan, O. (2017). "MinIAQ-II: A Miniature Foldable Quadruped with an Improved Leg Mechanism", IEEE ROBIO’17. IEEE International Conference on Robotics and Biomimetics p.19-25
  • Karakadıoğlu, C., Askari, M., Özcan, O. (2017). "Design and Operation of MinIAQ: An Untethered Foldable Miniature Quadruped with Individually Actuated Legs", IEEE AIM’17. IEEE International Conference on Advanced Intelligent Mechatronics p.247-252
  • Cole, K.D., Çetin, B. (2017). "Modeling of Joule heating and convective cooling in a thick-walled micro-tube", Int. J. Thermal Sciences, v.119 p.24-36, Full Text
  • Yıldıran, İ.N., Temizer, İ., Çetin, B. (2017). "Homogenization in Hydrodynamic Lubrication: Microscopic Regimes and Re-Entrant Textures", Journal of Tribology, v.140 p.011701 (1-19), Full Text, DOI: http://tribology.asmedigitalcollection.asme.org/article.aspx?articleid=2628741
  • Berkin Uluutku (Advisor: Mehmet Z. Baykara) (2017). "Modeling of NC-AFM Experiments by the Utilization of Molecular Dynamics and the Harmonic Oscillator Model", Bilkent University, Department of Mechanical Engineering, Full Text
  • Akkuş, Y., Tarman, H.İ., Çetin, B., Dursunkaya, Z. (2017). "Two-dimensional computational modeling of thin film evaporation", Int. J. Thermal Sciences, v.121 p.237–248, Full Text
  • Ye, Z., Balkancı, A., Martini, A., Baykara, M.Z. (2017). "Effect of Roughness on the Layer-Dependent Friction of Few-Layer Graphene", Physical Review B, v.96 p.115401 http://dx.doi.org/10.1103/PhysRevB.96.115401
  • Çetin, B., Öner, S.D., Baranoğlu, B. (2017). "Modeling of dielectrophoretic particle motion: Point particle vs finite-sized particle", Electrophoresis, v.38 p.1407-1418, Full Text, DOI: http://dx.doi.org/10.1002/elps.201600461
  • Esmaeili, A., Javili, A., Steinmann, P. (2017). "Highly-conductive energetic coherent interfaces subject to in-plane degradation", Mathematics and Mechanics of Solids, v.22(8) p.1696-1716, DOI: http://dx.doi.org/10.1177/1081286516642818
  • Çakmakcı, M., Kızıltaş-Şendür, G., Durak, U. (2017). "Simulation-Based Engineering", Guide to Simulation-Based Disciplines / Springer Publications, DOI: http://dx.doi.org/10.1007/978-3-319-61264-5_3
  • Chatzigeorgiou, G., Meraghni, F., Javili, A. (2017). "Generalized interfacial energy and size effects in composites", Journal of the Mechanics and Physics of Solids, v.106 p.257-282, DOI: http://dx.doi.org/10.1016/j.jmps.2017.06.002
  • Esmaeili, A., Steinmann, P., Javili, A. (2017). "Non-coherent energetic interfaces accounting for degradation", Computational Mechanics, v.59 p.361-383, DOI: http://dx.doi.org/10.1007/s00466-016-1342-7
  • Dortdivanlioglu, B., Javili, A., Linder, C. (2017). "Computational aspects of morphological instabilities using isogeometric analysis", Computer Methods in Applied Mechanics and Engineering, v.316 p.261-279, DOI: http://dx.doi.org/10.1016/j.cma.2016.06.028
  • Zaki, H., Unel, M., Yildiz, Y. (2017). "Trajectory control of a quadrotor using a control allocation approach", International Conference on Unmanned Aircraft Systems p.533-539
  • Esmaeili, A., Steinmann, P., Javili, A. (2017). "Coupled thermally general imperfect and mechanically coherent energetic interfaces subject to in-plane degradation", Journal of Mechanics of Materials and Structures, v.12 p.289-312, DOI: http://dx.doi.org/10.2140/jomms.2017.12.289
  • Yousefi, E., Demir, D.F., Sipahi, R., Yücelen, T., Yildiz, Y. (2017). "Effects Of Linear Filter On Stability And Performance Of Human-in-the-Loop Model Reference Adaptive Control Architecture", ASME Dynamic Systems and Controls Conference (accepted)
  • Javili, A., Saeb, S., Steinmann, P. (2017). "Aspects of implementing constant traction boundary conditions in computational homogenization via semi-Dirichlet boundary conditions", Computational Mechanics, v.59 p.21-35, DOI: http://dx.doi.org/10.1007/s00466-016-1333-8
  • Alan, A., Yildiz, Y., Poyraz, U. (2017). "Adaptive Pressure Control Experiment: Controller Design and Implementation", IEEE Conference on Control Technology and Applications (accepted)
  • Javili, A., Steinmann, P., Mosler, J. (2017). "Micro-to-macro transition accounting for general imperfect interfaces", Computer Methods in Applied Mechanics and Engineering, v.317 p.274-317, DOI: http://dx.doi.org/10.1016/j.cma.2016.12.025
  • Yousefi, E., Yildiz, Y., Sipahi, R. Y. T. (2017). "The Effect of Remote-Signal Feedback Architecture on the Stability of Human-in-the-Loop Telerobotics in the Presence of Time-Delays", IEEE Conference on Control Technology and Applications (accepted)
  • Yousefi, E., Yildiz, Y., Sipahi, R., Yucelen, T. (2017). "Stability Analysis of a Human-in-the-Loop Telerobotics System With Two Independent Time-Delays", IFAC World Congress (accepted)
  • Dibaji, S.M., Yildiz, Y., Annaswamy, A., Chakrabortty A., (2017). "Delay-Aware Control Designs of Wide-Area Power Networks", IFAC World Congress (accepted)
  • Tohidi, S.S., Yildiz, Y., Kolmanovsky, I.V. (2017). "Adaptive Control Allocation for Over-Actuated Systems with Actuator Saturation", IFAC World Congress (accepted)
  • Alan, A., Yildiz, Y., Poyraz U., (2017). "Pressure Control of Cold Air Testing Plant with Delay Resistant Closed-loop Reference Model Adaptive Control", AIAA Science and Technology Forum and Exposition (accepted)
  • Yucelen, T., Yildiz, Y., Sipahi, R. Y. E., Nguyen, N. (2017). "Stability Analysis of Human-Adaptive Controller Interactions", AIAA Science and Technology Forum and Exposition (accepted)
  • Ellialtıoğlı, P., Danış, B.İ., Çetin, B. (2017). "Parametric analysis of a combined cycle power plant with complete combustion using MATLAB GUI", 21th National Conference on Thermal Sciences (ULIBTK'17) p.187, Full Text
  • Hossein Alijani,, Akkuş, Y., Çetin, B., Dursunkaya, Z. (2017). "Düz-oluklu alüminyum ısı borularının ısıl performanslarının deneysel olarak incelenmesi", 21th National Conference on Thermal Sciences (ULIBTK'17) p.183, Full Text
  • Atay, A., Sarıarslan, b., Kuşcu, Y.F., Akkuş, Y., Saygan, S., Türker, A.G., Çetin, B., Dursunkaya, Z. (2017). "Sinterli ve oluklu ısı borularının kuruma sınırlarının deneysel tespiti", 21th National Conference on Thermal Sciences (ULIBTK'17) p.182, Full Text
  • Aydoğdu, İ.I., Fidan, C., Çetin, B. (2017). "Karşıt akışlı Ranque-Hilsch vorteks tüpünün deneysel analizi", 21th National Conference on Thermal Sciences (ULIBTK'17) p.181, Full Text
  • Çetin, B., Kuşcu, Y.F., Atay, A., Çetin, B. (2017). "Isı kaynağı içeren ısı iletimi problemleri için alternatif yaklaşımlar", 21th National Conference on Thermal Sciences (ULIBTK'17) p.180, Full Text
  • Çetin, B., Öner, S.D., Özer, M.B., Baranoğlu, B. (2017). "Mikro-kanallarda parçacık hareketinin modellenmesi", 21th National Conference on Thermal Sciences (ULIBTK'17) p.178, Full Text
  • Alijani, H., Çetin, B., Akkuş, Y., Dursunkaya, Z. (2017). "3-D modeling of a flat-grooved heat pipe", 10th Int. Conf. on Comput. Heat Mass Transfer, Full Text
  • Akkuş, Y., Çetin, B., Dursunkaya, Z. (2017). "Modeling of of evaporation from a sessile constant shape droplet", ASME 15th Int. Conf. Nano/Micro/Mini-channels (ICNMM 2017) p.5537, Abstract, Full Text
  • Uslu, H.D., Canpolat, Ç., Çetin, B. (2017). "Modeling of an AC-electro-osmosis based microfluidic mixer", ASME 15th Int. Conf. Nano/Micro/Mini-channels (ICNMM 2017) p.5536, Abstract, Full Text
  • Öner, S.D., Çetin, B. (2017). "Modeling of electro-kinetic motion of Janus droplet", ASME 15th Int. Conf. Nano/Micro/Mini-channels (ICNMM 2017) p.5501, Abstract, Full Text
  • Çetin, B., Güler, K.G., Aksel, M.H. (2017). "Computational modeling of vehicle radiators using porous medium approach", Heat Exchangers -- Design, Experiment and Simulation (Edited by Prof. S. M. Sohel Murshed, Prof. M. L. S. Matos Lopes) InTech p.243–262, Full Text
  • Gamze Düven (Co-advisor: Asst. Prof. Dr. Barbaros Çetin) (2017). "Determination of microbial load and somatic cell count in milk with lab-on-a-chip device", Ege University, Department of Food Engineering
  • Hossein Alijani Alijanvad (Advisor: Asst. Prof. Dr. Barbaros Çetin) (2017). "Thermal performance characterization of flat grooved heat pipes", Bilkent University, Mechanical Engineering Department
  • Reza Rasooli (Advisor: Asst. Prof. Dr. Barbaros Çetin) (2017). "Modeling of inertial particle flow and entry gas flow in micro-channels", Bilkent University, Mechanical Engineering Department
  • Mehmet Doğan Aşık (Co-supervisor: Asst. Prof. Dr. Barbaros Çetin) (2017). "Design and fabrication of a novel microfluidic device for the synthesis of bio-polimeric nanoparticles", Hacettepe University, Nanotechnology and Nanomedicine

2016

    Journal Paper
  • A. Carcaterra and A. Akay (2016). "Fluctuation-dissipation and energy properties of a finite bath", Physical Review E, v.93 p.032142
  • Gecer-Ulu, N., Ulu, E., Çakmakcı, M. (2016). "Design and Analysis of A Modular Learning Based Cross-Coupled Control Algorithm for Multi-Axis Precision Positioning Systems", International Journal of Control Automation and Systems, v.14(1), DOI: http://dx.doi.org/10.1007/s12555-014-0125-1
  • Dokuyucu, H.I., Çakmakcı, M. (2016). "Concurrent Design of Energy Management and Vehicle Traction Supervisory Control Algorithms for Parallel Hybrid Electric Vehicles", IEEE Transactions on Vehicular Technology, v.65(2), Abstract, DOI: http://dx.doi.org/10.1109/TVT.2015.2405347
  • Karpat, Y., Oliaei, S.N. (2016). "Influence of tool wear on machining forces and tool deflections during micro milling", The International Journal of Advanced Manufacturing Technology, v.84 p.1963-1980
  • Karpat, Y., Oliaei, S.N. (2016). "Investigating the influence of built-up edge on forces and surface roughness in micro scale orthogonal machining of titanium alloy Ti6Al4V", Journal of Materials Processing Technology, v.235 p.28-40
  • Cihan, E., İpek, S., Durgun, E., Baykara, M.Z. (2016). "Structural Lubricity under Ambient Conditions", Nature Communications, v.7 p.12055 http://dx.doi.org/10.1038/ncomms12055
  • H. Pouraliakbar, S. Firooz, M.R. Jandaghi, G. Khalaj, A. Nazari (2016). "Predicting the ultimate grain size of aluminum sheets undergone constrained groove pressing, The International Journal of Advanced Manufacturing Technology", v.86 p.1639-1658
  • H. Pouraliakbar, M. Pakbaz, S. Firooz, M.R. Jandaghi, G. Khalaj (2016). "Study on the dynamic and static softening phenomena in Al–6Mg alloy during two-stage deformation through interrupted hot compression test, Measurement", v.77 p.50-53
  • Karpat, Y., Çakmakcı, M., Ali, Z., Türeyen, E.B. (2016). "Fabrication of Polymer Micro Needles for Transdermal Drug Delivery System Using DLP Based Projection Stereo-lithography", Procedia CIRP, v.42 p.87-90
  • B. Talebi, A. Abedian, S. Firooz (2016). "Optimization of composite patch repair for inclined crack on aluminum plate using genetic algorithm, 30th International Council of Aeronautical Science"
  • Kılıç, K.İ., Temizer, İ. (2016). "Tuning Macroscopic Sliding Friction at Soft Contact Interfaces: Interaction of Bulk and Surface Heterogeneities", Tribology International, v.104 p.83-97, DOI: http://dx.doi.org/10.1016/j.triboint.2016.08.024
  • Aşık, M.D., Çetin, B., Kaplan, M., Erdem, Y., Sağlam, N. (2016). "3D printed microfluidic reactor for high throughput chitosan nanoparticle synthesis", The 20th Int. Conf. Miniaturized Systems for Chemistry and Life Sciences (MicroTAS 2016), Full Text
  • Waseem, A., Temizer, İ., Kato, J., Terada, K. (2016). "Homogenization-Based Design of Surface Textures in Hydrodynamic Lubrication", International Journal for Numerical Methods in Engineering, v.108 p.1427-1450, DOI: http://dx.doi.org/10.1002/nme.5256
  • Musavi, N., Onural, D., Gunes, K., Yildiz, Y. (2016). "Unmanned Aircraft Systems Airspace Integration: A Game Theoretical Framework for Concept Evaluations", AIAA Journal of Guidance, Control and Dynamics, v.40(1) p.96-109
  • Temizer, İ., Stupkiewicz, S. (2016). "Formulation of the Reynolds Equation on a Time-Dependent Lubrication Surface", Proceedings of the Royal Society A, v.472 p.20160032, DOI: http://dx.doi.org/10.1098/rspa.2016.0032
  • Abidi, K., Yildiz, Y., Korpe, B.E. (2016). "Explicit Time Delay Compensation in Teleoperation: An Adaptive Control Approach", International Journal of Robust and Nonlinear Control, v.26(15) p.3388–3403
  • Temizer, İ. (2016). "Sliding Friction Across the Scales: Thermomechanical Interactions and Dissipation Partitioning", Journal of the Mechanics and Physics of Solids, v.89 p.126-148, DOI: http://dx.doi.org/10.1016/j.jmps.2016.01.012
  • Hesch, C., Franke, M., Dittmann, M., Temizer, İ. (2016). "Hierarchical NURBS and a higher-order phase-field approach to fracture for finite-deformation contact problems", Computer Methods in Applied Mechanics and Engineering, v.301 p.242-258, DOI: http://dx.doi.org/10.1016/j.cma.2015.12.011
  • Temizer, İ., Hesch, C. (2016). "Hierarchical NURBS in Frictionless Contact", Computer Methods in Applied Mechanics and Engineering, v.299 p.161-186, DOI: http://dx.doi.org/10.1016/j.cma.2015.11.006
  • Demirbaş, T., Baykara, M.Z. (2016). "Nanoscale Tribology of Graphene Grown by Chemical Vapor Deposition and Transferred onto Silicon Oxide Substrates", Journal of Materials Research, v.31 p.1914-1923 http://dx.doi.org/10.1557/jmr.2016.11
  • Çetin, B., Özer, M.B., Çağatay, E., Büyükkoçak, S. (2016). "An integrated acoustic and dielectrophoretic particle manipulation in a microfluidic device for particle wash and separation fabricated by mechanical machining", Biomicrofluidics, v.10 p.014112, Full Text, DOI: http://dx.doi.org/http://dx.doi.org/10.1063/1.4940431
  • Arda Balkancı (Advisor: Mehmet Z. Baykara) (2016). "Influence of Interface Structure on the Nanotribological Properties of Exfoliated Graphene", Bilkent University, Department of Mechanical Engineering, Full Text
  • Kerse, C., Kalaycıoğlu, H., Elahi, P., Yavaş, S., Kesim, D., Akçaalan, Ö., Öktem, B., Çetin, B., Aşık, M., Hoogland, H., Holzwarth, R., İlday, F.Ö. (2016). "Ablation-cooled material removal with ultrafast bursts of pulses", Nature, v.537 p.84-88, Full Text, DOI: http://dx.doi.org/doi:10.1038/nature18619
  • Yavuz, C., Oliaei, S.N., Çetin, B., Yeşil-Çeliktaş, Ö. (2016). "Sterilization of PMMA microfluidic chips by various techniques and investigation of material characteristics", J. Supercrticial Fluids, v.107 p.114–121, Full Text, DOI: http://dx.doi.org/10.1016/j.supflu.2015.08.019
  • Esmaeili, A., Javili, A., Steinmann, P. (2016). "Coherent energetic interfaces accounting for in-plane degradation", International Journal of Fracture, v.202 p.135-165, DOI: http://dx.doi.org/10.1007/s10704-016-0160-4
  • Saeb, S., Steinmann, P., Javili, A. (2016). "Aspects of computational homogenization at finite deformations. A unifying review from Reuss' to Voigt's bound", Applied Mechanics Reviews, v.68 p.050801, DOI: http://dx.doi.org/10.1115/1.4034024
  • Lejeune, E., Javili, A., Weickenmeier, J., Kuhl, E., Linder, C. (2016). "Tri-layer wrinkling as a mechanism for anchoring center initiation in the developing cerebellum", Soft Matter, v.12 p.5613, DOI: http://dx.doi.org/10.1039/c6sm00526h
  • Karpat, Y., Bahtiyar, O. (2016). "Energy Based Investigation of Process Parameters While Drilling Carbon Fiber Reinforced Polymers", Procedia CIRP, v.46 p.59-62
  • Esmaeili, A., Javili, A., Steinmann, P. (2016). "A thermo-mechanical cohesive zone model accounting for mechanically energetic Kapitza interfaces", International Journal of Solids and Structures, v.92-93 p.29-44, DOI: http://dx.doi.org/10.1016/j.ijsolstr.2016.04.035
  • Karpat, Y., Çakmakcı, M., Ali, Z., Türeyen, E.B. (2016). "Fabrication of Polymer Micro Needles for Transdermal Drug Delivery System Using DLP Based Projection Stereo-lithography", Procedia CIRP, v.42 p.87-90
  • Eskandari, M., Javili, A., Kuhl, E. (2016). "Elastosis during airway wall remodeling explains multiple co-existing instability patterns", Journal of Theoretical Biology, v.403 p.209-218, DOI: http://dx.doi.org/10.1016/j.jtbi.2016.05.022
  • Karpat, Y., Oliaei, S.N. (2016). "Fabrication of PCD Mechanical Planarization Tools by Using μ-Wire Electrical Discharge Machining", Procedia CIRP, v.42 p.311-316
  • Lejeune, E., Javili, A., Linder, C. (2016). "An algorithmic approach to multi-layer wrinkling", Extreme Mechanics Letters, v.7 p.10-17, DOI: http://dx.doi.org/10.1016/j.eml.2016.02.008
  • Oyler, D.W., Li, N., Zhang, M., Yildiz, Y., Girard, A., Kolmanovsky I. V., (2016). "Hierarchical Reasoning Game Theory Based Approach for Evaluation and Testing of Autonomous Vehicle Control Systems", IEEE Conference on Decision and Control (accepted)
  • McBride, A., Gottschalk, D., Reddy, B., Wriggers, P., Javili, A. (2016). "Computational and theoretical aspects of a grain-boundary model at finite deformations", Technische Mechanik, v.36 p.92-109
  • Oyler, D. Y. Y. G. A. K. I. (2016). "A Game Theoretical Model of Traffic with Multiple Interacting Drivers for Use in Autonomous Vehicle Development", American Control Conference (accepted)
  • Lejeune, E., Javili, A., Linder, C. (2016). "Understanding geometric instabilities in thin films via a multi-layer model", Soft Matter, v.12 p.806, DOI: http://dx.doi.org/10.1039/C5SM02082D
  • Tohidi, S.S., Yildiz, Y., Kolmanovsky, I. (2016). "Fault Tolerant Control for Over-Actuated Systems: An Adaptive Correction Approach", American Control Conference (accepted)
  • Gottschalk, D., McBride, A., Reddy, B., Javili, A., Wriggers, P., Hirschberger, C. (2016). "Computational and theoretical aspects of a grain-boundary model that accounts for grain misorientation and grain-boundary orientation", Computational Materials Science, v.111 p.443-459, DOI: http://dx.doi.org/10.1016/j.commatsci.2015.09.048
  • Musavi, N., Tekelioğlu, K.B., Yildiz, Y., Gunes, K., Onural, D. (2016). "A Game Theoretical Modeling and Simulation Framework For The Integration Of UAS In To The NAS", AIAA Infotech @ Aerospace, AIAA Science and Technology Forum and Exposition (Accepted)
  • Yıldıran, İ.N., Öner, S.D., Yılmaz, O.D., Çetin, B. (2016). "Mathematical modeling of performance of a liquid piston compressor", Proc. 9th Pump Valve Compressor Conference, Full Text
  • Cole, K.D., Doğrusöz, Y.S., Çetin, B. (2016). "Forward models for the electrocardiography problem: Voltage sources versus current sources", 2016 Inverse Problems Symposium
  • Öner, S.D., Karakuş, A., Çetin, B., Baranoğlu, B. (2016). "Parallel boundary element formulation for 2D microfluidic particulate flow for multi-threaded architectures", ECCOMAS Congress 2016
  • Alijanvad, H.A., Çetin, B., Akkuş, Y., Dursunkaya, Z. (2016). "Experimental investigation of thermal performance of aluminum-grooved micro heat pipe", 5th Micro and Nano Flows Conference, Full Text
  • Rasooli, R., Karaoğlu, O.K., Çetin, B. (2016). "Simulation of particle flow in a spiral microchannel for inertial microfluidics", 5th Micro and Nano Flows Conference, Full Text
  • Aşık, M.D., Çetin, B., Kaplan, M., Erdem, Y., Sağlam, N. (2016). "3D printed microfluidic reactor for high throughput chitosan nanoparticle synthesis", The 20th Int. Conf. Miniaturized Systems for Chemistry and Life Sciences (MicroTAS 2016), Full Text
  • Çağatay, E., Özer, M.B., Çetin, B. (2016). "3D Modeling of on-chip acoustophoretic particle manipulation in a polymer microfluidic device", The 20th Int. Conf. Miniaturized Systems for Chemistry and Life Sciences (MicroTAS 2016), Full Text
  • Çetin, B., Kaplan, H., Durkaya, G., Kurtuldu, H. (2016). "The 20th Int. Conf. Miniaturized Systems for Chemistry and Life Sciences (MicroTAS 2016)", Çetin, B., Kaplan, H., Durkaya, G., Kurtuldu, H. (2016)., Full Text
  • Kuşcu, Y., Atay, A., Çetin, B., Meco, H., Çetin, B. (2016). "Thermal modeling of heat affected zone of a low carbon steel in gas arc and laser welding", 17th Int. Conf. Machine Design and Production (UMTIK-2016)
  • Kurt, C., Çetin, B., Baranoglu, B. (2016). "2D boundary element formulation for deformable particle flow in a microchannel", Int. Conf. Boundary Element and Meshless Techniques
  • Yeşil-Çeliktaş, Ö., Çetin, B., Yıldırım, E. (2016). "Mikroakışkan Sistemlere Yönelik Gelecek Tahminleri", Mikroakışkan Teknolojilerin Temelleri ve Uygulamaları (Edited by Assoc. Prof. Ö. Yeşil-Çeliktaş)
  • Yavuz, C., Çetin, B., Yeşil-Çeliktaş, Ö. (2016). "Mikroakışkan Sistemlerin Sterilizasyonu", Mikroakışkan Teknolojilerin Temelleri ve Uygulamaları (Edited by Assoc. Prof. Ö. Yeşil-Çeliktaş)
  • Çetin, B., Yıldırım, E., Akay, Ş. (2016). "Mikroakışkan Sistemlerin Üretimi", Mikroakışkan Teknolojilerin Temelleri ve Uygulamaları (Edited by Assoc. Prof. Ö. Yeşil-Çeliktaş)

2015

    Journal Paper
  • Özkan, A., Erdem, Y. (2015). "Numerical analysis of mixing performance in sinusoidal microchannels based on particle motion in droplets", Microfluidics and Nanofluidics, Abstract, Full Text, DOI: https://link.springer.com/article/10.1007%2Fs10404-015-1628-7
  • L. Biancofiore, F.G. (2015). "Interaction between counterpropagating Rossby waves and capillary waves in planar shear flows", Physics of Fluids, v.27 p.044104
  • L. Biancofiore, F.G. (2015). "Interaction between counterpropagating Rossby waves and capillary waves in planar shear flows", Physics of Fluids, v.27 p.044104, DOI: http://dx.doi.org/http://dx.doi.org/10.1063/1.4916285
  • Karpat, Y., Bahtiyar, O. (2015). "Tool geometry based prediction of critical thrust force while drilling carbon fiber reinforced polymers", Advances in Manufacturing, v.3 p.300-308
  • Cihan, E., Özoğul, A., Baykara, M.Z. (2015). "Structure and Nanotribology of Thermally Deposited Gold Nanoparticles on Graphite", Applied Surface Science, v.354 p.429-436 http://dx.doi.org/10.1016/j.apsusc.2015.04.099
  • Zeinali, S., Çetin, B., Oliaei, S., Karpat, Y. (2015). "Fabrication of continuous flow microfluidics device with 3D electrode structures for high throughput DEP applications using mechanical machining", Electrophoresis, Special Issue on Dielectrophoresis, v.36(13) p.1432-1442, DOI: http://onlinelibrary.wiley.com/doi/10.1002/elps.201400486/full
  • Eric Sage,, Ariel Brenac,, Thomas Alava,, Robert Morel,, Cecilia Dupre,, Selim Hanay,, Michael L. Roukes,, Laurent Duraffourg,, Christophe Masselon,, Sébastien Hentz (2015). "Neutral particle mass spectrometry with nanomechanical systems", Nature Communications, v.6(6482), Full Text
  • Ebru Cihan (Advisor: Mehmet Z. Baykara) (2015). "Structure and Nanotribology of Thermally Deposited Gold Nanoparticles on Graphite", Bilkent University, Institute of Materials Science & Nanotechnology, Full Text
  • Nyffeler, C., Hanay, S., Sacchetto, D., Leblebici, Y. (2015). "Graphene field effect devices operating in differential circuit configuration", Microelectronic Engineering, Full Text, DOI: https://linkinghub.elsevier.com/retrieve/pii/S0167931715001252
  • Uluutku, B., Baykara, M.Z. (2015). "Artifacts Related to Tip Asymmetry in High-Resolution Atomic Force Microscopy and Scanning Tunneling Microscopy Measurements of Graphitic Surfaces", Journal of Vacuum Science & Technology B, v.33 p.031802 http://dx.doi.org/10.1116/1.4915898
  • Hanay, S., Kelber, S.I., O'Connell, C.D., Mulvaney, P., Sader, J.E., Roukes, M.L. (2015). "Inertial Imaging with Nanomechanical Systems", Nature Nanotechnology, Full Text, DOI: http://dx.doi.org/doi:10.1038/nnano.2015.32
  • Bruhwiler, R., Goldberg, B., Doshi, N., Özcan, O., Jafferis, N., Karpelson, M., Wood, R. (2015). "Feedback Control of a Legged Microrobot with On-Board Sensing", IROS'15. IEEE/RSJ International Conference on Intelligent Robots and Systems p.5727-5733
  • Acosta, D.M., Yildiz, Y., Craun, R.W., Beard, S.D., Leonard, M.W., Hardy, G.H., Weinstein, M. (2015). "Motion-Based Piloted Simulation Evaluation of a Control Allocation Technique to Recover from Pilot Induced Oscillations", AIAA Journal of Aircraft, v.52(1) p.130-140, DOI: http://dx.doi.org/10.2514/1.C032576
  • Kabacaoğlu, G., Temizer, İ. (2015). "Homogenization of Soft Interfaces in Time-Dependent Hydrodynamic Lubrication", Computational Mechanics, v.56 p.421-441, DOI: http://dx.doi.org/10.1007/s00466-015-1179-5
  • Tuna Demirbaş (Advisor: Mehmet Z. Baykara) (2015). "Nanotribological Properties of Graphene Grown by Chemical Vapor Deposition and Transferred Onto Silicon Oxide Substrates", Bilkent University, Department of Mechanical Engineering, Full Text
  • Karakaya, Z., Baranoğlu, B., Çetin, B., Yazıcı, A. (2015). "A parallel boundary element formulation for tracking multiple particle trajectories in Stoke's flow for microfluidic applications", CMES-Computer Modeling in Engineering and Science, v.104(3) p.227-249, Full Text
  • Barışık, M., Yazıcıoğlu, A.G., Çetin, B., Kakaç, S. (2015). "Analytical solution of thermally developing microtube heat transfer including axial conduction", Int. Comm. Heat and Mass Transfer, v.67 p.81-88, Full Text, DOI: http://dx.doi.org/http://dx.doi.org/10.1016/j.icheatmasstransfer.201
  • Çetin, B., Koska, K., Erdal, M. (2015). "Warpage Characterization of Microchannels Fabricated by Injection Molding", ASME J. Micro and Nano-Manufacturing, v.3(2) p.021005, Full Text, DOI: http://dx.doi.org/10.1115/1.4029841
  • Zeinali, S., Çetin, B., Oliaei, S., Karpat, Y. (2015). "Fabrication of continuous flow microfluidics device with 3D electrode structures for high throughput DEP applications using mechanical machining", Electrophoresis, Special Issue on Dielectrophoresis, v.36(13) p.1432-1442, Full Text, DOI: http://dx.doi.org/10.1002/elps.201400486
  • Karpat, Y., Bahtiyar, O. (2015). "Comparative analysis of PCD drill designs during drilling of CFRP laminates", Procedia CIRP, v.31 p.316-321
  • Chatzigeorgiou, G., Javili, A., Steinmann, P. (2015). "Interface properties influence the effective dielectric constant of composites", Philosophical Magazine, v.95 p.3402-3412, DOI: http://dx.doi.org/10.1080/14786435.2015.1051155
  • Yildiz, Y., Unel, M., Demirel, A.E. (2015). "Adaptive Nonlinear Hierarchical Control of a Novel Quad Tilt-Wing UAV", European Control Conference (accepted)
  • Javili, A., Chatzigeorgiou, G., McBride, A., Steinmann, P., Linder, C. (2015). "Computational homogenization of nano-materials accounting for size effects via surface elasticity", GAMM Mitteilungen, v.38 p.285-312, DOI: http://dx.doi.org/10.1002/gamm.201510016
  • Alan, A., Yildiz, Y., Poyraz, U. (2015). "Gas Generator Pressure Control in Throttleable Ducted Rockets: A Classical and Adaptive Control Approach", AIAA/SAE/ASEE Joint Propulsion Conference (accepted)
  • Chatzigeorgiou, G., Javili, A., Steinmann, P. (2015). "Multiscale modelling for composites with energetic interfaces at the micro- or nanoscale", Mathematics and Mechanics of Solids, v.20 p.1130-1145, DOI: http://dx.doi.org/10.1177/1081286513516122
  • Abidi, K., Yildiz, Y. (2015). "On the Discrete Adaptive Posicast Controller", IFAC Workshop on Time-Delay Systems (accepted)
  • Javili, A., Dortdivanlioglu, B., Kuhl, E., Linder, C. (2015). "Computational aspects of growth-induced instabilities through eigenvalue analysis", Computational Mechanics, v.56 p.405-420, DOI: http://dx.doi.org/10.1007/s00466-015-1178-6
  • Yildiz, Y., Annaswamy, A. (2015). "Robust Adaptive Posicast Controller", IFAC Workshop on Time-Delay Systems (accepted)
  • Chatzigeorgiou, G., Javili, A., Steinmann, P. (2015). "Surface magneto-elasticity theory", Archives of Applied Mechanics, v.85 p.1265-1288, DOI: http://dx.doi.org/10.1007/s00419-014-0938-7
  • Müderrisoğlu, C., Onbaş, R., Çetin, B., Sargın, S., Yeşil-Çeliktaş, Ö. (2015). "Design, fabrication and testing of PDMS microchips for enzymatic hydrolyses of saponins", VII. Bioengineering Cong. ''Human Welfare'' (BEC2015)
  • Türkmen, İ., Sankır, M., Çetin, B., Baker, D. (2015). "Comparison of planar and cylindrical 3D PEMFC Models", III. European Conference on Renewable Energy Systems (ECRES)
  • Solmaz, M.E., Çetin, B., Baranoğlu, B., Serhatlıoğlu, M., Bıyıklı, N. (2015). "Boundary Element Method for optical force calibration in microfluidic dual-beam optical trap", SPIE-Optical Trapping and Optical Micromanipulation XII, Full Text
  • Kerse, C., Kalaycıoğlu, H., Elahi, P., Akçaalan, Ö., Yavaş, S., Aşık, M.D., Kesim, D., Yavuz, K., Çetin, B., İlday, F.Ö. (2015). "Ablation-cooled material removal at high speed with femtosecond pulse bursts", Advanced Solid State Lasers Conference and Exhibition (ASSL 2015)
  • Çoşkun, S., Yüksel, M., Bulut, Y., Çetin, B. (2015). "Parametric analysis of a combined cycle using MATLAB GUI", 20th National Conference on Thermal Sciences (ULIBTK'15), Full Text
  • Yıldıran, İ., Öner, D., Çetin, B. (2015). "GPU-computation of 2-dimensional Laplace Equation using Boundary Element Method", 20th National Conference on Thermal Sciences (ULIBTK'15), Full Text
  • Taze, S., Çetin, B., Yılmaz, M., Dursunkaya, Z. (2015). "Assessment of different micro-fabrication techniques for the fabrication of a micro-groove heat pipe", 20th National Conference on Thermal Sciences (ULIBTK'15), Full Text
  • Karakurt, İ., Çetin, B. (2015). "Continuous flow microfluidic PCR reactor", 2nd Novel Fluidic Technologies and Applications Workshop
  • Rasooli, R., Çetin, B., Baranoğlu, B. (2015). "Assessment of Different Element Orders for Boundary Element Formulation of Particulate Flow in Microchannels", 2nd Novel Fluidic Technologies and Applications Workshop
  • Çağatay, E., Çetin, B., Özer, B. (2015). "An integrated microfluidic device for particle wash and particle separation", 2nd Novel Fluidic Technologies and Applications Workshop
  • A.G. Demir,, B. Previtali,, Barbaros Çetin (2015). "Laser micro-milling for the manufacturing of microfluidic device mold", 8th Int. Conference and Exhibition on Design and Production of Machines and Dies/Molds (Submitted), Full Text
  • Taze, S., Çetin, B., Dursunkaya, Z. (2015). "Multi-physics modeling of silicon micro-grooved heat pipe", 8th International Conference on Computational Heat and Mass Transfer(139), Full Text
  • Çetin, B., Cole, K. (2015). "Modeling of conjugate heat transfer in an electrically heated microtube", 8th International Conference on Computational Heat and Mass Transfer(140), Full Text
  • Çetin, B., Çelik, B., Sert, C. (2015). "Analysis of heat transfer in slip-flow regime by parallel implementation of Lattice-Boltzmann method on GPUs", 8th International Conference on Computational Heat and Mass Transfer(138), Full Text
  • Çetin, B., Li, D. (2015). "Temperature Gradient Generation and Control", Encyclopedia of Micro and Nanofluidics (2nd Edition), Springer p.3225-3227, Full Text
  • Çetin, B., Baranoğlu, B. (2015). "Boundary-Element Method in Microfluidics", Encyclopedia of Micro and Nanofluidics (2nd Edition), Springer p.202-213, Full Text, DOI: https://link.springer.com/referenceworkentry/10.1007%2F978-3-642-27758-0_121-6
  • Çetin, B., Salemmilani, R., Li, D. (2015). "Microfluidic Rotary Pump", Encyclopedia of Micro and Nanofluidics (2nd Edition), Springer p.2000-2004, Full Text, DOI: https://link.springer.com/referenceworkentry/10.1007%2F978-3-642-27758-0_944-7
  • Çetin, B., Salemmilani, R., D. Li (2015). "Ultrasonic pumps", Encyclopedia of Micro and Nanofluidics (2nd Edition), Springer p.3394-3397, Full Text, DOI: https://link.springer.com/referenceworkentry/10.1007%2F978-3-642-27758-0_1646-8
  • Çetin, B., Zeinali, S., Li, D. (2015). "Microfluidic Optical Devices", Encyclopedia of Micro and Nanofluidics (2nd Edition), Springer p.1980-1984, Full Text, DOI: https://link.springer.com/referenceworkentry/10.1007%2F978-3-642-27758-0_940-6
  • Çetin, B., Zeinali, S., Li, D. (2015). "Magnetic Pumps", Encyclopedia of Micro and Nanofluidics (2nd Edition) p.1690-1695, Full Text, DOI: https://link.springer.com/referenceworkentry/10.1007%2F978-3-642-27758-0_843-6
  • Çetin, B., Taze, S., Li, D. (2015). "Methods for Pressure Measurements", Encyclopedia of Micro and Nanofluidics (2nd Edition), Springer p.2828-2834, Full Text, DOI: https://link.springer.com/referenceworkentry/10.1007%2F978-3-642-27758-0_1296-7
  • Büyükkoçak, S., Özer, M.B., Çetin, B. (2015). "Microscale Acoustofluidics", Encyclopedia of Micro and Nanofluidics (2nd Edition), Springer p.2149-2158, Full Text, DOI: https://link.springer.com/referenceworkentry/10.1007%2F978-3-642-27758-0_1735-4
  • Serdar Taze (Advisor: Asst. Prof. Dr. Barbaros Çetin) (2015). "Modeling and fabrication of silicon micro-grooved heat pipes", Bilkent University, Mechanical Engineering Department, Full Text
  • Gizem Bedir (Co-advisor: Asst. Prof. Dr. Barbaros Çetin) (2015). "Forward problem of electrocardiography in terms of transmembrane potentials within 3D heart", METU Electrical and Electronics Engineering Department, Full Text

2014

    Journal Paper
  • Roveri, N., Carcaterra, A., Akay, A. (2014). "Frequency intermittency and energy pumping by linear attachments", Journal of Sound and Vibration, v.333 p.4281-4294
  • Özcan, O., Hu, W., Sitti, M., Bain, J., Ricketts, D. (2014). "Investigation of Tip Current and Normal Force Measured Simultaneously During Local Oxidation of Titanium using Dual-Mode Scanning Probe Microscopy", Micro & Nano Letters, IET, v.9(5) p.332-336
  • L. Biancofiore, F.G. P.L. (2014). "Direct numerical simulations of two-phase immiscible wakes", Fluid Dynamics Research, v.46 p.041409
  • L. Biancofiore, F.G. P.L. (2014). "Direct numerical simulations of two-phase immiscible wakes", Fluid Dynamics Research, v.46 p.041409, DOI: http://dx.doi.org/http://dx.doi.org/10.1088/0169-5983/46/4/041409
  • Erva Ulu,, Nurcan Gecer-Ulu,, Çakmakcı, M. (2014). "Development and Validation of an Adaptive Method to Generate High-Resolution Quadrature Encoder Signals", Journal Dynamic Systems Measurement and Control, v.136(3) p.034503
  • Baisch, A., Özcan, O., Goldberg, B., Ithier, D., Wood, R. (2014). "High Speed Locomotion for a Quadrupedal Microrobot", The International Journal of Robotics Research, v.33(8) p.1063-1082
  • L. Biancofiore (2014). "Crossover between two-and three-dimensional turbulence in spatial mixing layers", Journal of Fluid Mechanics, v.745 p.164-179
  • L. Biancofiore (2014). "Crossover between two-and three-dimensional turbulence in spatial mixing layers", Journal of Fluid Mechanics, v.745 p.164-179, DOI: http://dx.doi.org/http://dx.doi.org/10.1017/jfm.2014.85
  • Özcan, O., Wang, H., Taylor, J., Sitti, M. (2014). "STRIDE II: A Water Strider-Inspired Miniature Robot with Circular Footpads", International Journal of Advanced Robotic Systems, v.11 p.85
  • Oliaei, S., Özdemir, C., Karpat, Y. (2014). "Fabrication of Micro Ball End Mills Using Micro Electro Discharge Machining", Int. J. of Mechatronics and Manufacturing Systems
  • H. Pouraliakbar, S. Firooz, M.R. Jandaghi, G. Khalaj, A. Amirafshar (2014). "Combined effect of heat treatment and rolling on pre-strained and SPDed aluminum sheet, Materials Science and Engineering", v.612 p.371-379
  • Karpat, Y., Değer, B., Bahtiyar, O., Kaftanoğlu, B. (2014). "A Mechanistic Approach to Investigate Drilling of UD-CFRP Laminates with PCD Drills", CIRP Annals – Manufacturing Technology, v.63
  • Karpat, Y., Değer, B., Bahtiyar, O. (2014). "Experimental Evaluation of Polycrystalline Diamond Tool Geometries while Drilling Carbon Fiber Reinforced Plastics", Journal of Advanced Manufacturing Technology, v.71/5 p.1295-1307
  • Seitz, B., Goldberg, B., Doshi, N., Özcan, O., Christensen, D., Hawkes, E., Cutkosky, M., Wood, R. (2014). "Bio-Inspired Mechanisms for Inclined Locomotion in a Legged Insect-Scale Robot", 2014 ROBIO, IEEE International Conference on Robotics and Biomimetics
  • Yildiz, Y., Brat, G., Agogino, A. (2014). "Predicting Pilot Behavior in Medium Scale Scenarios Using Game Theory and Reinforcement Learning", AIAA Journal of Guidance, Control and Dynamics, v.37(4) p.1335-1343
  • Aukes, D., Özcan, O., Wood, R. (2014). "Monolithic Design and Fabrication of a 2-DOF Bio-Inspired Leg Transmission", Living Machines: Biomimetic and Biohybrid Systems p.1-10
  • Özcan, O., Baisch, A., Ithier, C., Wood, R. (2014). "Powertrain Selection for a Biologically-Inspired Miniature Quadruped Robot", ICRA’14. IEEE International Conference on Robotics and Automation p.2398-2405
  • Goldberg, B., Karpelson, M., Özcan, O., Wood, R. (2014). "Planar Fabrication of a Mesoscale Voice Coil Actuator", ICRA’14. IEEE International Conference on Robotics and Automation p.6319-6325
  • Temizer, İ. (2014). "Computational Homogenization of Soft Matter Friction: Isogeometric Framework and Elastic Boundary Layers", International Journal for Numerical Methods in Engineering, v.100 p.953-981, DOI: http://dx.doi.org/10.1002/nme.4778
  • Karpelson, M., Waters, B., Goldberg, B., Mahoney, B., Özcan, O., Baisch, A., Meyitang, P., Smith, J., Wood, R. (2014). "A Wirelessly Powered, Biologically-Inspired Ambulatory Microrobot", ICRA’14. IEEE International Conference on Robotics and Automation p.2384-2391
  • Temizer, İ., Abdalla, M., Gürdal, Z. (2014). "An Interior Point Method for Isogeometric Contact", Computer Methods in Applied Mechanics and Engineering, v.276 p.589-611, DOI: http://dx.doi.org/10.1016/j.cma.2014.03.018
  • Dittmann, M., Franke, M., Temizer, İ., Hesch, C. (2014). "Isogeometric analysis and thermomechanical mortar contact problems", Computer Methods in Applied Mechanics and Engineering, v.274 p.192-212, DOI: http://dx.doi.org/10.1016/j.cma.2014.02.012
  • Wu, T., Temizer, İ., Wriggers, P. (2014). "Multiscale Hydro-Thermo-Chemo-Mechanical Coupling: Application to Alkali-Silica Reaction", Computational Materials Science, v.84 p.381-395, DOI: http://dx.doi.org/10.1016/j.commatsci.2013.12.029
  • Temizer, İ. (2014). "Multiscale Thermomechanical Contact: Computational Homogenization with Isogeometric Analysis", International Journal for Numerical Methods in Engineering, v.97 p.582-607, DOI: http://dx.doi.org/10.1002/nme.4604
  • Çetin, B., Özer, M.B., Solmaz, M.E. (2014). "Microfluidic bio-particle manipulation for biotechnology", Biochemical Engineering Journal, v.92 p.63-82, Full Text
  • Çetin, B., Aşık, M.D., Taze, S. (2014). "Design and fabrication of a microfluidic device for synthesis of chitosan nanoparticles", ASME J. Nanotechnology in Engineering and Medicine, v.4(3) p.031004, Full Text, DOI: http://dx.doi.org/10.1115/1.4026287
  • Cole, K., Çetin, B., Brettmann, L. (2014). "Microchannel heat transfer with slip flow and wall effects", AIAA J. Thermophysics and Heat Transfer, v.28(3) p.455-462, Full Text, DOI: http://dx.doi.org/10.2514/1.T4267
  • Büyükkoçak, S., Özer, B., Çetin, B. (2014). "Numerical modeling of acoustophoretic particle separation for microfuildics", Microfluid Nanofluid, v.17(6) p.1025-1037, Full Text, DOI: http://dx.doi.org/10.1007/s10404-014-1398-7
  • Çetin, B., Zeinali, S. (2014). "Analysis of heat transfer for a low Peclet number microtube flow using second-order slip model: An extended-Graetz problem", J. Engineering Mathematics, v.89(1) p.13-25, Full Text, DOI: http://dx.doi.org/10.1007/s10665-014-9704-7
  • Oliaei, S., Karpat, Y. (2014). "Experimental Investigations on Micro Milling of Stavax Stainless Steel", CIRP High Performance Cutting Conference
  • Javili, A., McBride, A., Steinmann, P., Reddy, B. (2014). "A unified computational framework for bulk and surface elasticity theory: A curvilinear-coordinate-based finite element methodology", Computational Mechanics, v.54 p.745-762, DOI: http://dx.doi.org/10.1007/s00466-014-1030-4
  • Kaessmair, S., Javili, A., Steinmann, P. (2014). "Thermomechanics of solids with general imperfect coherent interfaces", Archives of Applied Mechanics, v.84 p.1409-1426, DOI: http://dx.doi.org/10.1007/s00419-014-0870-x
  • Javili, A., Kaessmair, S., Steinmann, P. (2014). "General imperfect interfaces", Computer Methods in Applied Mechanics and Engineering, v.275 p.76-97, DOI: http://dx.doi.org/10.1016/j.cma.2014.02.022
  • Chatzigeorgiou, G., Javili, A., Steinmann, P. (2014). "Unified magnetomechanical homogenization framework with application to magnetorheological elastomers", Mathematics and Mechanics of Solids, v.19 p.194-212, DOI: http://dx.doi.org/10.1177/1081286512458109
  • Chatzigeorgiou, G., Javili, A., Steinmann, P. (2014). "Surface electrostatics - theory and computations", Proceedings of the Royal Society A, v.470 p.20130628, DOI: http://dx.doi.org/10.1098/rspa.2013.0628
  • Javili, A., Steinmann, P., Kuhl, E. (2014). "A novel strategy to identify the critical conditions for growth-induced instabilities", Journal of the Mechanical Behavior of Biomedical Materials, v.29 p.20-32, DOI: http://dx.doi.org/10.1016/j.jmbbm.2013.08.017
  • Acosta, D., Yildiz, Y., Klyde, D. (2014). "Avoiding Pilot-Induced Oscillations in Energy-Efficient Aircraft Designs", IEEE Control Systems Society
  • A. Akay and A. Carcaterra ''Damping Mechanisms'' (2014). "Active and Passive Vibration Control of Structures, (P. Hagedorn and G. Spelsberg-Korspeter, Eds., CISM International Centre for Mechanical Sciences)", Springer p.259-299
  • Güler, K., Çetin, B., Aksel, H. (2014). "Simulation of thermal characteristics of radiators using a porous model", International Symposium on Convective Heat and Mass Transfer (CONV-14) p.176, Full Text
  • Karakurt, İ., Çetin, B. (2014). "Multiphysics simulation of microfluidic reactor for polymerase chain reaction", International Symposium on Convective Heat and Mass Transfer (CONV-14) p.79, Full Text
  • Büyükkoçak, S., Özer, B., Çetin, B. (2014). "Finite element modeling of micro-particle manipulation using ultrasonic standing waves", ASME 12th International Conference on Nanochannels, Microchannels and Minichannels, Full Text
  • Çetin, B., Zeinali, S. (2014). "Modeling of on-chip (bio)particle separation and counting using 3D electrode structures", 4th Micro and Nano Flows Conference, Full Text
  • Baranoğlu, B., Çetin, B. (2014). "A particle flow specific boundary element formulation for microfluidic applications", 4th Micro and Nano Flows Conference, Full Text
  • Soheila Zeinali (Advisor: Asst. Prof. Dr. Barbaros Çetin) (2014). "Microfluidic device with 3D electrode structure for high throughput dielectrophoretic applications", Bilkent University, Mechanical Engineering Department, Full Text
  • Kadir G. Güler (Co-advisor: Asst. Prof. Dr. Barbaros Çetin) (2014). "Computational modeling of fin-and-tube type vehicle radiators based on porous medium approach", METU, Department of Mechanical Engineering, Full Text

2013

    Journal Paper
  • Erdem, Y., Cheng, J., Vigevani, G., Doyle, F., Pisano, A. (2013). "Rapidly Printed Polyurethane Microreactor for the Synthesis of Monodisperse Magnetic Iron Oxide Nanoparticles", in preparation
  • Erdem, Y., Cheng, J., Doyle, F., Pisano, A.P. (2013). "Multi-Temperature Zone, Droplet-based Microreactor for Increased Temperature Control in Nanoparticle Synthesis", Small (available online), DOI: http://dx.doi.org/10.1002/smll.201302379
  • Ritter, C., Baykara, M.Z., Stegemann, B., Heyde, M., Rademann, K., Schroers, J., Schwarz, U. (2013). "Nonuniform Friction-Area Dependency for Antimony Oxide Surfaces Sliding on Graphite", Physical Review B, v.88 p.045422 http://dx.doi.org/10.1103/PhysRevB.88.045422
  • Karpat, Y., Polat, N. (2013). "Mechanistic force modeling for milling of carbon fiber reinforced polymers with double helix tools", CIRP Annals- Manufacturing Technology, v.62 p.95-98
  • Uluutku, B., Baykara, M.Z. (2013). "Effect of Lateral Tip Stiffness on Atomic-Resolution Force Field Spectroscopy", Journal of Vacuum Science & Technology B, v.31 p.041801 http://dx.doi.org/10.1116/1.4807376
  • Backhaus, S., Bent, R., Bono, J., Lee, R., Tracey, B., Wolpert, D., Xie, D., Yildiz, Y. (2013). "Cyber-Physical Security: A Game Theory Model of Humans Interacting over Control Systems", IEEE Transactions on Smart Grid, v.4(4) p.2320-2327
  • Özcan, O., Baisch, A. T., Wood, R. (2013). "Design and Feedback Control of a Biologically-Inspired Miniature Quadruped", IROS’13. IEEE/RSJ International Conference on Intelligent Robots and Systems p.1438-1444
  • Temizer, İ. (2013). "Granular Contact Interfaces with Non-Circular Particles", Tribology International, v.67 p.229–239, DOI: http://dx.doi.org/10.1016/j.triboint.2013.08.005
  • Temizer, İ., Wu, T., Wriggers, P. (2013). "On the Optimality of the Window Method in Computational Homogenization", International Journal of Engineering Science, v.64 p.66-73, DOI: http://dx.doi.org/10.1016/j.ijengsci.2012.12.007
  • Temizer, İ. (2013). "A Mixed Formulation of Mortar-Based Contact with Friction", Computer Methods in Applied Mechanics and Engineering, v.255 p.183-195, DOI: http://dx.doi.org/10.1016/j.cma.2012.12.002
  • Wu, T., Temizer, İ., Wriggers, P. (2013). "Computational Thermal Homogenization of Concrete", Cement & Concrete Composites, v.35 p.59-70, DOI: http://dx.doi.org/10.1016/j.cemconcomp.2012.08.026
  • Çetin, B. (2013). "Effect of thermal creep on heat transfer for a 2D microchannel flow: An analytical approach", ASME J. Heat Transfer, Special Issue on Microchannel Heat Transfer, v.135(10) p.101007, Full Text, DOI: http://dx.doi.org/10.1115/1.4024504
  • Oliaei, S., Özdemir C.,, Karpat, Y. (2013). "Fabrication of Micro Ball End Mills Using Micro Electro Discharge Machining", 7th International Conference And Exhibition on Design and Production of Machines and Dies/Molds
  • Craun, R.W., Acosta, D.M., Beard, S.D., Leonard, M.W., Hardy, G.H., Weinstein, M., Yildiz, Y. (2013). "Motion-Based Piloted Simulation Evaluation of a Control Allocation Technique to Recover from Pilot Induced Oscillations", AIAA Guidance, Navigation, and Control (GNC) Conference p.AIAA 2013-4926
  • Yildiz, Y., Brat, G., A. Agogino (2013). "Predicting Pilot Behavior in Medium Scale Scenarios Using Game Theory and Reinforcement Learning", AIAA Modeling and Simulation Technologies Conference p.AIAA 2013-4908
  • Javili, A., Chatzigeorgiou, G., Steinmann, P. (2013). "Computational homogenization in magneto-mechanics", International Journal of Solids and Structures, v.50 p.4197-4216, DOI: http://dx.doi.org/10.1016/j.ijsolstr.2013.08.024
  • Javili, A., dell'Isola, F., Steinmann, P. (2013). "Geometrically nonlinear higher-gradient elasticity with energetic boundaries", Journal of the Mechanics and Physics of Solids, v.61 p.2381-2401, DOI: http://dx.doi.org/10.1016/j.jmps.2013.06.005
  • Javili, A., McBride, A., Mergheim, J., Steinmann, P., Schmidt, U. (2013). "Micro-to-macro transitions for continua with surface structure at the microscale", International Journal of Solids and Structures, v.50 p.2561-2572, DOI: http://dx.doi.org/10.1016/j.ijsolstr.2013.03.022
  • Javili, A., McBride, A., Steinmann, P. (2013). "Thermomechanics of solids with lower-dimensional energetics: A unifying review. On the Importance of surface, interface and curve structures at the nanoscale", Applied Mechanics Reviews, v.65 p.010802, DOI: http://dx.doi.org/10.1115/1.4023012
  • Davydov, D., Javili, A., Steinmann, P. (2013). "On molecular static and surface-enhanced continuum modeling of nano-structures", Computational Material Science, v.69 p.510-519, DOI: http://dx.doi.org/1016/j.commatsci.2012.11.053
  • Javili, A., McBride, A., Steinmann, P. (2013). "Numerical modelling of thermomechanical solids with highly conductive energetic interfaces", International Journal for Numerical Methods in Engineering, v.93 p.551-574, DOI: http://dx.doi.org/1002/nme.4402
  • Davydov, D., Javili, A., Steinmann, P., McBride, A. (2013). "Surface Effects in Solid Mechanics: A comparison of atomistic and surface enhanced continuum approaches at finite temperature", Springer, DOI: http://dx.doi.org/10.1007/978-3-642-35783-1_4
  • Baranoğlu, B., Çetin, B. (2013). "Simulation of particle motion in a microchannel using Boundary Element Method", 18th National Mechanics Conference
  • Çagatay, E., Altınok, M.F., Çetin, B. (2013). "Analysis of gas power cycyles and Brayton refrigeration cycles using MATLAB", 19th National Conference on Thermal Sciences(164) p.978-982, Full Text
  • Çetin, B., Büyükkoçak, S., Zeinali, S., Özer, B. (2013). "Simulation of an integrated microfluidic device for bioparticle wash, separation and concentration", Proc. ASME 2013 4th Microscale/Nanoscale Heat & Mass Transfer International Conference, DOI: http://dx.doi.org/10.1115/MNHMT2013-22181
  • Salemmilani, R., Çetin, B. (2013). "Spiral microfluidic device for continuous flow PCR", ASME 2013 Summer Heat Transfer Conference(17305) p.V002T11A001, DOI: http://dx.doi.org/10.1115/HT2013-17305
  • Çetin, B., Taze, S., Aşık, M., Tuncel, A. (2013). "Microfluidic device for synthesis of chitosan nanoparticles", ASME 2013 Fluid Engineering Summer Meeting (16349) p.V002T21A006, DOI: http://proceedings.asmedigitalcollection.asme.org/proceeding.aspx?articleid=1790157
  • A. Koray Koska (Advisor: Asst. Prof. Dr. Barbaros Çetin) (2013). "Injection molding of polymeric microfluidic devices", Bilkent University, Mechanical Engineering Department, Full Text

2012

    Journal Paper
  • Akay, A., Carcaterra, A., Bernardini, C. (2012). "Trapping of vibration energy into a set of resonators: Theory and application to aerospace structures", Mechanical Systems and Signal Processing, v.26 p.1
  • Doh, I., Erdem, Y., Pisano, A. (2012). "Trapping and Collection of Uniform Size Droplets for Nanoparticle Synthesis", Applied Physics Letters, v.100 p.074106
  • L. Biancofiore and F. Gallaire (2012). "Counterpropagating Rossby waves in confined plane wakes", Physics of Fluids, v.24 p.074102
  • L. Biancofiore and F. Gallaire (2012). "Counterpropagating Rossby waves in confined plane wakes", Physics of Fluids, v.24 p.074102, DOI: http://dx.doi.org/http://dx.doi.org/10.1063/1.4729617
  • Duncombe, T., Erdem, Y., Shastry, A., Baskaran, R., Böhringer, K. (2012). "Controlling Liquid Drops with Texture Ratchets", Advanced Materials, v.24 p.1545
  • Özcan, O., Sitti, M. (2012). "Modeling of Conductive Atomic Force Microscope Probes for Scanning Tunneling Microscope Operation", Micro & Nano Letters, IET, v.7(4) p.329-333
  • L. Biancofiore, F.G. (2012). "Influence of confinement on obstacle-free turbulent wakes", Computers & Fluids, v.58 p.27–44
  • L. Biancofiore, F.G. (2012). "Influence of confinement on obstacle-free turbulent wakes", Computers & Fluids, v.58 p.27–44, DOI: http://dx.doi.org/http://dx.doi.org/10.1016/j.compfluid.2011.12.008
  • Emre Akgün,, Çakmakcı, M. (2012). "Development of a Supervisory Controller for Residential Energy Management Problems", Proc. of the American Control Conference (ACC), Abstract
  • Dokuyucu, H.I., Çakmakcı, M. (2012). "Concurrent Design of Energy Management and Vehicle Stability Algorithms for a Parallel Hybrid Vehicle using Dynamic Programming", Proc. of the American Control Conference (ACC), Abstract
  • Hanay, S., Kelber, S., Naik, A., Chi, D., Hentz, S., Bullard, C., Colinet, E., Duraffourg, L., Roukes, M. (2012). "Single-Protein Nanomechanical Mass Spectrometry in Real Time", Nature Nanotechnology, v.7 p.602, Full Text
  • Karpat, Y., Değer, B., Bahtiyar, O. (2012). "Mechanistic Force Modeling for Milling of Unidirectional Carbon Fiber Reinforced Polymer Laminates", International Journal of Machine Tools and Manufacture, v.56 p.79
  • Karpat, Y., Değer, B., Bahtiyar, O. (2012). "Drilling Thick Fabric Woven CFRP Laminates with Double Point Angle Tools", Journal of Materials Processing Technology, v.212 p.2117
  • Önal, Ç.D., Özcan, O., Sitti, M. (2012). "Automated Tip Based 2-D Mechanical Assembly of Micro/Nanoparticles", In J.J. Gorman, and B. Shapiro (Eds.), Feedback Control of MEMS to Atoms, Springer p.69-108
  • Özcan, O. (2012). "Tip Based Automated Nanomanipulation using Scanning Probe Microscopy", Carnegie Mellon University
  • Temizer, İ. (2012). "A Mixed Formulation of Mortar-Based Frictionless Contact", Computer Methods in Applied Mechanics and Engineering, v.223-224 p.173-185, DOI: http://dx.doi.org/10.1016/j.cma.2012.02.017
  • Budt, M., Temizer, İ., Wriggers, P. (2012). "A Computational Homogenization Framework for Soft Elastohydrodynamic Lubrication", Computational Mechanics, v.49 p.749-767, DOI: http://dx.doi.org/10.1007/s00466-012-0709-7
  • Temizer, İ. (2012). "On the Asymptotic Expansion Treatment of Two-Scale Finite Thermoelasticity.", International Journal of Engineering Science, v.53 p.74-84, DOI: http://dx.doi.org/10.1016/j.ijengsci.2012.01.003
  • Temizer, İ., Wriggers, P., Hughes, T. (2012). "Three-Dimensional Mortar-Based Frictional Contact Treatment in Isogeometric Analysis with NURBS", Computer Methods in Applied Mechanics and Engineering, v.209-212 p.115-128, DOI: http://dx.doi.org/10.1016/j.cma.2011.10.014
  • Karpat, Y., Değer, B. B. O. (2012). "Mechanistic Force Modeling for Milling of Unidirectional Carbon Fiber Reinforced Polymer (CFRP) Laminates", 5th CIRP Conference on High Performance Cutting, Zurich
  • Yildiz, Y., Brat, G., Lee, R. (2012). "Using Game Theoretic Models to Predict Pilot Behavior in NextGen Merging and Landing Scenario", AIAA Modeling and Simulation Technologies Conference p.AIAA Paper 2012-4487
  • Javili, A., McBride, A., Steinmann, P. (2012). "Numerical modelling of thermomechanical solids with mechanically energetic (generalised) Kapitza interfaces", Computational Material Science, v.65 p.542-551, DOI: http://dx.doi.org/1016/j.commatsci.2012.06.006
  • Javili, A., McBride, A., Steinmann, P., Reddy, B. (2012). "Relationships between the admissible range of surface material parameters and stability of linearly elastic bodies", Philosophical Magazine, v.92 p.3540-3563, DOI: http://dx.doi.org/1080/14786435.2012.682175
  • McBride, A., Mergheim, J., Javili, A., Steinmann, P., Bargmann, S. (2012). "Micro-to-macro transitions for heterogeneous material layers accounting for in-plane stretch", Journal of the Mechanics and Physics of Solids, v.60 p.1221-1239, DOI: http://dx.doi.org/1016/j.jmps.2012.01.003
  • Steinmann, P., McBride, A., Bargmann, S., Javili, A. (2012). "A deformational and configurational framework for geometrically nonlinear continuum thermomechanics coupled to diffusion", International Journal of Non-Linear Mechanics, v.47 p.215-227, DOI: http://dx.doi.org/1016/j.ijnonlinmec.2011.05.009
  • Steinmann, P., Javili, A. (2012). "IUTAM Symposium on Surface Effects in the Mechanics of Nanomaterials and Heterostructures: Computational thermomechanics with boundary structures", Springer, DOI: http://dx.doi.org/10.1007/978-94-007-4911-5_16
  • Çetin, B. (2012). "Evaluation of Nusselt number for a flow in a microtube with second-order model including thermal creep", 10th Int. Conf. Nano/Micro/Mini-channels (ICNMM’2012)(73321) p.251-256, DOI: http://proceedings.asmedigitalcollection.asme.org/proceeding.aspx?articleid=1719023
  • S. Berat Çelik (Co-advisor: Asst. Prof. Dr. Barbaros Çetin) (2012). "Analysis of single phase fluid flow and heat transfer in slip-flow regime by parallel implementation of Lattice-Boltzmann Method on GPUs", METU, Department of Mechanical Engineering, Full Text

2011

    Journal Paper
  • Carcaterra, A., Akay, A. (2011). "Dissipation in a finite-size bath", Physical Review E, v.84 p.011121
  • Çakmakcı, M., Ulsoy, A.G. (2011). "Swappable Distributed MIMO Controller for a VCT Engine", IEEE Transactions on Control Systems Technology, v.19(5) p.1168-1177
  • Fagiani, R., Massi, F., Chatelet, E., Berthier, Y., Akay, A. (2011). "Tactile perception by friction induced vibrations", Tribology International, v.44 p.1100
  • Önal, Ç.D., Özcan, O., Sitti, M. (2011). "Automated 2-D Nanoparticle Manipulation using Atomic Force Microscopy", Nanotechnology, IEEE Transactions on, v.10(3) p.472-481
  • L. Biancofiore and F. Gallaire (2011). "The influence of shear layer thickness on the stability of confined two-dimensional wakes", Physics of Fluids, v.23 p.034103
  • L. Biancofiore and F. Gallaire (2011). "The influence of shear layer thickness on the stability of confined two-dimensional wakes", Physics of Fluids, v.23 p.034103, DOI: http://dx.doi.org/http://dx.doi.org/10.1063/1.3554764
  • L. Biancofiore, F.G. (2011). "Influence of confinement on a two-dimensional wake", Journal of Fluid Mechanics, v.688 p.297-320
  • L. Biancofiore, F.G. (2011). "Influence of confinement on a two-dimensional wake", Journal of Fluid Mechanics, v.688 p.297-320, DOI: http://dx.doi.org/http://dx.doi.org/10.1017/jfm.2011.376
  • Çakmakcı, M., Li, Y., Liu, S. (2011). "Model-in-the-Loop Development for Fuel Cell Vehicle", Proc. of the American Control Conference (ACC), Abstract
  • L. Biancofiore, F.G. (2011). "Large eddy simulations of confined turbulent wake flows", Journal of Physics: Conference Series, v.318 p.042044
  • L. Biancofiore, F.G. (2011). "Large eddy simulations of confined turbulent wake flows", Journal of Physics: Conference Series, v.318 p.042044, DOI: http://dx.doi.org/http://dx.doi.org/10.1088/1742-6596/318/4/042044
  • Karpat, Y. (2011). "Temperature Dependent Flow Softening of Titanium Alloy Ti6Al4V: An Investigation Using Finite Element Simulation Of Machining", Journal of Materials Processing Technology, v.211 p.737
  • Yildiz, Y., Annaswamy, A., Yanakiev, D., Kolmanovsky, I. (2011). "Spark Ignition Engine Idle Speed Control: An Adaptive Control Approach", IEEE Transactions on Control Systems Technology, v.19(5) p.990-1002
  • Yildiz, Y., Kolmanovsky, I. (2011). "Stability properties and cross coupling performance of the control allocation scheme CAPIO", Journal of Guidance, Control and Dynamics, v.34(12) p.1190-1196
  • Önal, Ç.D., Sümer, B., Özcan, O., Nain, A., Sitti, M. (2011). "Tip Based Robotic Precision Micro/Nanomanipulation Systems", SPIE Defense, Security, and Sensing, International Society for Optics and Photonics p.80580M
  • Çetin, B., Li, D. (2011). "Dielectrophoresis in microfluidics technology", Electrophoresis, Special Issue on Dielectrophoresis, v.32 p.2410–2427, DOI: http://dx.doi.org/10.1002/elps.201100167
  • De Lorenzis, L., Temizer, İ., Wriggers, P., Zavarise, G. (2011). "A large deformation frictional contact formulation using NURBS-based isogeometric analysis", International Journal for Numerical Methods in Engineering, v.87 p.1278-1300, DOI: http://dx.doi.org/10.1002/nme.3159
  • Çetin, B., Bayer, O. (2011). "Evaluation of Nusselt number for a flow in a microtube using second-order slip model", Thermal Science, v.15(Suppl.(Suppl. 1) p.103-109, DOI: http://dx.doi.org/10.2298/TSCI11S1103C
  • Temizer, İ., Wriggers, P., Hughes, T. (2011). "Contact Treatment in Isogeometric Analysis with NURBS", Computer Methods in Applied Mechanics and Engineering, v.200 p.1100-1112, DOI: http://dx.doi.org/10.1016/j.cma.2010.11.020
  • Çetin, B., Cole, K. (2011). "The effect of axial conduction on heat transfer in a liquid microchannel flow", Int. J. Heat and Mass Transfer, v.54 p.2542-2549, DOI: http://dx.doi.org/10.1016/j.ijheatmasstransfer.2011.02.007
  • Temizer, İ., Wriggers, P. (2011). "An adaptive multiscale resolution strategy for the finite deformation analysis of microheterogeneous structures", Computer Methods in Applied Mechanics and Engineering, v.200 p.2639-2661, DOI: http://dx.doi.org/10.1016/j.cma.2010.06.013
  • Temizer, İ., Wriggers, P. (2011). "Homogenization in Finite Thermoelasticity", Journal of the Mechanics and Physics of Solids, v.59 p.344–372, DOI: http://dx.doi.org/10.1016/j.jmps.2010.10.004
  • Temizer, İ. (2011). "Thermomechanical Contact Homogenization with Random Rough Surfaces and Microscopic Contact Resistance", Tribology International, v.44 p.114-124, DOI: http://dx.doi.org/10.1016/j.triboint.2010.09.011
  • Ma, J., Temizer, İ., Wriggers, P. (2011). "Random homogenization analysis in linear elasticity based on analytical bounds and estimates", International Journal of Solids and Structures, v.48(2) p.280-291, DOI: http://dx.doi.org/10.1016/j.ijsolstr.2010.10.004
  • Yildiz, Y., Kolmanovsky, I. (2011). "A Control Allocation System for Automatic Detection and Compensation of Phase Shift Due To Actuator Rate Limiting", American Control Conference p.444-449
  • Abidi, K., Yildiz, Y. (2011). "Discrete-Time Adaptive Posicast Controller for Uncertain Time-Delay Systems", AIAA Guidance, Navigation, and Control Conference p.AIAA Paper 2011-6442
  • Yildiz, Y. (2011). "The Effect of Explicit Adaptive Time Delay Compensation on Time Delay Margin", AIAA Guidance, Navigation, and Control Conference p.AIAA Paper 2011-6440
  • McBride, A., Javili, A., Steinmann, P., Bargmann, S. (2011). "Geometrically nonlinear continuum thermomechanics with surface energies coupled to diffusion", Journal of the Mechanics and Physics of Solids, v.59 p.2116-2133, DOI: http://dx.doi.org/1016/j.jmps.2011.06.002
  • Javili, A., and Steinmann, P. (2011). "A finite element framework for continua with boundary energies. Part III: The thermomechanical case", Computer Methods in Applied Mechanics and Engineering, v.200 p.1963-1977, DOI: http://dx.doi.org/1016/j.cma.2010.12.013
  • Çelik, B.S., Sert, C., Çetin, B. (2011). "Simulation of lid-driven cavity flow by parallel implementation of Lattice-Boltzmann method on GPUs", 2nd International Symposium on Computing in Science and Engineering (ISCSE'11), Full Text
  • Çelik, B.S., Sert, C., Çetin, B. (2011). "Simulation of channel flow by parallel implementation of thermal Lattice-Boltzmann method on GPUs", 7th International Conference on Computational Heat and Mass Transfer (ICCHMT'2011), Full Text
  • Çetin, B., Taze, S., Ozturk, Y. (2011). "Viscous flow calculations for undergraduate fluid mechanics education using MATLAB", 18th National Conference on Thermal Sciences, Full Text
  • Güler, K.G., Çetin, B. (2011). "Simulation of elektrokinetic manipulation of particle inside microchannels", 18th National Conference on Thermal Sciences, Full Text
  • Gürol, Y., Çelik, S.B., Çetin, B. (2011). "Simulation of 2D electro-osmotic flow inside microchannels using Lattice-Boltzmann method on GPUs", 18th National Conference on Thermal Sciences, Full Text

2010

    Journal Paper
  • Nasibov, H., Kholmatov, A., Akselli, B., Nasibov, A., Baytaroğlu, Ş. (2010). "Performance Analysis of the CCD Pixel Binning Option in particle–Image Velocimetry Measurement", IEEE/ASME Transaction on Mechatronics, v.15(4)
  • Nasibov, H., Baytaroğlu, Ş. (2010). "Recent Advances in Digital Image Velocimetry method for Flow Motion Analysis", International Journal of Metrology Quality Engineering, v.1(1)
  • Cheng, X., Erdem, Y., Takeuchi, S., Fujita, H., Ratner, B., Böhringer, K. (2010). "Infrared Light Induced Patterning of Proteins on ppNIPAM Thermoresponsive Thin Films: A “Protein Laser Printer", Lab on a Chip, v.8 p.1079
  • Erdem, Y., Chen, Y., Mohabbi, M., Suh, J., Kovacs, G., Darling, R., Böhringer, K. (2010). "Thermally Actuated Omnidirectional Walking Microrobot", IEEE Journal of MEMS, v.19 p.433
  • L. Biancofiore and F. Gallaire (2010). "Influence of confinement on temporal stability of plane jets and wakes", Physics of Fluids, v.22 p.014106
  • L. Biancofiore and F. Gallaire (2010). "Influence of confinement on temporal stability of plane jets and wakes", Physics of Fluids, v.22 p.014106, DOI: http://dx.doi.org/http://dx.doi.org/10.1063/1.3292679
  • Karpat, Y. (2010). "A Modified Material Model for the Finite Element Simulation of Machining Titanium Alloy Ti6Al4V", Machining Science and Technology, v.14 p.390
  • Yildiz, Y., Annaswamy, A., Kolmanovsky, I., Yanakiev, D. (2010). "Adaptive Posicast Controller for Time-delay Systems with Relative Degree n*<=2", Automatica, v.46(2) p.279-289
  • Yildiz, Y., Annaswamy, A., Yanakiev, D., Kolmanovsky, I. (2010). "Spark Ignition Engine Fuel-to-Air Ratio Control: An Adaptive Control Approach", Control Engineering Practice, v.18(12) p.1369-1378
  • Özcan, O., Wang, H., Taylor, J., Sitti, M. (2010). "Surface Tension Driven Water Strider Robot using Circular Footpads", ICRA’10. IEEE International Conference on Robotics and Automation p.3799-3804
  • Önal, Ç.D., Özcan, O., Sitti, M. (2010). "Atomic Force Microscopy Based Nanomanipulation Systems", In K. Settler (Ed.), Handbook of Nanophysics: Nanomedicine and Nanorobotics
  • Çetin, B., Li, D. (2010). "Lab-on-a-chip device for continuous particle and cell separation based on electrical properties via AC-dielectrophoresis", Electrophoresis, v.31 p.3035-3043, DOI: http://dx.doi.org/10.1002/elps.20090007830
  • Korkmaz, E., Karpat, Y., Filiz, S. (2010). "Recent Developments in Micro Machining Technologies", 14th International Conference on Machine Design and Production
  • Temizer, İ., Wriggers, P. (2010). "A micromechanically motivated higher-order continuum formulation of linear thermal conduction", Zeitschrift für Angewandte Mathematik und Mechanik, v.90(10-11) p.768-782, DOI: http://dx.doi.org/10.1002/zamm.201000009
  • Temizer, İ., Wriggers, P. (2010). "Thermal contact conductance characterization via computational contact homogenization: A finite deformation theory framework", International Journal for Numerical Methods in Engineering, v.83(1) p.24-58, DOI: http://dx.doi.org/10.1002/nme.2822
  • Temizer, İ., Wriggers, P. (2010). "Inelastic analysis of granular interfaces via computational contact homogenization", International Journal for Numerical Methods in Engineering, v.84(8) p.883-915, DOI: http://dx.doi.org/10.1002/nme.2921
  • Yildiz, Y., Kolmanovsky, I. (2010). "A Control Allocation Technique to Recover From Pilot Induced Oscillations (CAPIO) Due To Actuator Rate Limiting", American Control Conference p.516-523
  • Yildiz, Y., Kolmanovsky, I. (2010). "Stability properties and cross coupling performance of the control allocation scheme CAPIO", AIAA Infotech@Aerospace p.AIAA Paper 2010-347
  • Yildiz, Y. (2010). "Adaptive Control For Time Delay Systems Applied To Flight Control", AIAA Guidance, Navigation, and Control Conference p.AIAA Paper 2010-7576
  • Yildiz, Y., Kolmanovsky, I. (2010). "Implementation of CAPIO for Composite Adaptive Control of Cross-Coupled Unstable Aircraft", AIAA Infotech@Aerospace p.AIAA Paper 2011-1460
  • Javili, A., Steinmann, P. (2010). "On thermomechanical solids with boundary structures", International Journal of Solids and Structures, v.47 p.3245-3253, DOI: http://dx.doi.org/1016/j.ijsolstr.2010.08.009
  • Javili, A., Steinmann, P. (2010). "A finite element framework for continua with boundary energies. Part II: The three-dimensional case", Computer Methods in Applied Mechanics and Engineering, v.199 p.755-765, DOI: http://dx.doi.org/1016/j.cma.2009.11.003
  • Çetin, B., Bayer, O. (2010). "Evaluation of Nusselt number for a flow in a microtube with constant heat flux including axial conduction, viscous dissipation and second-order slip model", The 3rd International Symposium on Nonlinear Dynamics (ISND 2010), Full Text

2009

    Journal Paper
  • Baytaroğlu, Ş., Sadıkoğlu, E., Yılmaz, O. (2009). "Ya Ölçmeseydik", TÜBİTAK Bilim ve Teknik Dergisi Mayıs Sayısı
  • Çakmakcı, M., Ulsoy, A. (2009). "Improving Component Swapping Modularity using Bi-directional Communication in Networked Control Systems", IEEE/ASME Transactions on Mechatronics, v.14(3) p.307-319
  • Pierce, A., Akay, A. (2009). "Intrinsic damping models and their role in predicting structural response", Journal of the Acoustical Society of America, v.125 p.2602
  • Carcaterra, A., Akay, A. (2009). "Vibration absorption based on cluster of beams", J. Sound and Vibration
  • Akay, A., Giannini, O., Massi, F., Sestieri, A. (2009). "Disc brake squeal characterization through simplified test rigs", Mechanical Systems and Signal Processing, v.23 p.2590-2607
  • N. Roveri,, A. Carcaterra,, Akay, A. (2009). "Vibration absorption using non-dissipative complex attachments with impacts and parametric stiffness", Journal of the Acoustical Society of America, v.126 p.2306-2314
  • N. Roveri,, A. Carcaterra,, Akay, A. (2009). "Energy equipartition and frequency distribution in complex attachments", Journal of the Acoustical Society of America, v.126 p.122-128
  • Çakmakcı, M., Ulsoy, A.G. (2009). "Combined Component Swapping Modularity for a VCT Engine Controller", Dynamic Systems and Control Conference
  • Li, S., Çakmakcı, M., Kolmanovsky, I.V., Ulsoy, A. (2009). "Throttle Actuator Swapping Modularity Design for Idle Speed Control", American Control Conference, Abstract
  • Naik, A., Hanay, S., Hiebert, W., Feng, X., Roukes, M. (2009). "Towards Single-Molecule Nanomechanical Mass Spectrometry", Nature Nanotechnology, v.4 p.445, Full Text
  • Karpat, Y. (2009). "Investigation of the Effect of Cutting Tool Edge Radius on Material Separation due to Ductile Fracture in Machining", International Journal of Mechanical Sciences, v.51 p.541
  • Önal, Ç.D., Özcan, O., Sitti, M. (2009). "Automated 2-D Nanoparticle Manipulation with an Atomic Force Microscope", ICRA’09. IEEE International Conference on Robotics and Automation p.1814-1819
  • Çetin, B., Yazıcıoğlu, A.G., Kakaç, S. (2009). "Slip-flow heat transfer in microtubes with axial conduction and viscous dissipation-an extended Graetz problem", Int. J. Thermal Sciences, v.48 p.1673-1678, DOI: http://dx.doi.org/10.1016/j.ijthermalsci.2009.02.002
  • Çetin, B., Kang, Y., Wu, Z., Li, D. (2009). "Continuous particle separation with localized AC-DEP using embedded electrodes and an insulating hurdle", Electrochimica Acta, v.54 p.1715-1720, DOI: http://dx.doi.org/10.1016/j.electacta.2008.09.062
  • Çetin, B., Kang, Y., Wu, Z., Li, D. (2009). "Continuous particle separation by size via AC-DEP using a lab-on-a-chip device with 3D electrodes", Electrophoresis, v.30 p.766-772, DOI: http://dx.doi.org/10.1002/elps.200800464
  • Çetin, B., Li, D. (2009). "Continuous particle separation based on electrical properties using AC-DEP", Electrophoresis, v.30 p.3124-3133, DOI: http://dx.doi.org/10.1002/elps.20090007830
  • Javili, A., Steinmann, P. (2009). "A finite element framework for continua with boundary energies. Part I: The two-dimensional case", Computer Methods in Applied Mechanics and Engineering, v.198 p.2198-2208, DOI: http://dx.doi.org/1016/j.cma.2009.02.008
  • Bulut, B., Barbaros Çetin,, Yazıcıoğlu, A., Kakaç, S. (2009). "Finite element analysis of gaseous flow in microchannels with axial conduction", 17th National Conference on Thermal Sciences p.308-314, Full Text
  • Çetin, B. (2009). "Microfluidic Continuous Separation of Particles and Cells by using AC-Dielectrophoresis", Vanderbilt University, Department of Mechanical Engineering, Full Text

2008

    Journal Paper
  • Baytaroğlu, Ş., Altan, A. (2008). "The Development of Metrology and its Contributions to National Economy in Turkey", 1st International Symposium RMO 2008 – Regional Metrology Organization
  • Tangpong, X., Wickert, J., Akay, A. (2008). "Finite Element Model for Hysteretic Friction Damping of Traveling Wave Vibration in Axisymmetric Structures", ASME Journal of Vibration and Acoustics, v.130
  • Tangpong, X., Wickert, J., Akay, A. (2008). "Distributed friction damping of traveling wave vibration in rods", Philosophical Transactions of the Royal Society: Part A, v.366 p.811-827
  • Zhao, Y., Yan, Z., Malik, A., Blankenship, J., Çakmakcı, M. (2008). "Development of a Hardware-In-The-Loop System for a Hybrid Powertrain Vehicle Control", SAE Global Powertrain Congress
  • Akay, A. (2008). "A Renaissance in Engineering PhD Education", European Journal of Engineering Education, v.33 p.403-413
  • Karpat, Y., Özel, T. (2008). "Mechanics of High Speed Cutting with Curvilinear Edge Tools", International Journal of Machine Tools and Manufacture, v.48 p.195
  • Karpat, Y., Özel, T. (2008). "Analytical and Thermal Modeling of High-Speed Machining with Chamfered Tools", ASME Journal of Manufacturing Science and Engineering, v.130 p.011001
  • Özel, T., Karpat, Y., Srivastava, A. (2008). "Hard Turning with Variable Micro-Geometry PcBN Tools", CIRP Annals, v.57 p.73
  • Çetin, B., Yazıcıoğlu, A.G., Kakaç, S. (2008). "Fluid Flow in microtubes with axial conduction including rarefaction and viscous dissipation", Int. Comm. Heat and Mass Transfer, v.35 p.535-544, DOI: http://dx.doi.org/10.1016/j.icheatmasstransfer.2008.01.003
  • Çetin, B., Li, D. (2008). "Effect of Joule heating on electrokinetic transport", Electrophoresis, v.29(5) p.994-1005, DOI: http://dx.doi.org/10.1002/elps.200700601
  • Temizer, İ., Wriggers, P. (2008). "On a mass conservation criterion in homogenization", Journal of Applied Mechanics, Transactions ASME, v.75 p.054503, DOI: http://dx.doi.org/10.1115/1.2913042
  • Çetin, B., Travis, B.E., Li, D. (2008). "Analysis of the electro-viscous effects on pressure-driven liquid flow in a two-section heterogeneous microchannel", Electrochimica Acta, v.54 p.660-664, DOI: http://dx.doi.org/10.1016/j.electacta.2008.07.008
  • Temizer, İ., Wriggers, P. (2008). "A multiscale contact homogenization technique for the modeling of third bodies in the contact interface", Computer Methods in Applied Mechanics and Engineering, v.198(3-4) p.377-396, DOI: http://dx.doi.org/10.1016/j.cma.2008.08.008
  • Temizer, İ., Wriggers, P. (2008). "On the computation of the macroscopic tangent for multiscale volumetric homogenization problems", Computer Methods in Applied Mechanics and Engineering, v.198(3-4) p.495-510, DOI: http://dx.doi.org/10.1016/j.cma.2008.08.018
  • Yildiz, Y., Annaswamy, A., Yanakiev, D., Kolmanovsky, I. (2008). "Adaptive Air Fuel Ratio Control for Internal Combustion Engines", American Control Conference p.2058-2063
  • Yildiz, Y., Annaswamy, A., Yanakiev, D., Kolmanovsky, I. (2008). "Automotive Powertrain Control Problems Involving Time Delay: An Adaptive Control Approach", ASME Dynamic Systems and Control Conference p.1421-1428 (BEST STUDENT PAPER AWARD)
  • Peters, F., Ruppel, C., Javili, A., Kunkel, T. (2008). "The two-dimensional laminar wall jet. Velocity measurements compared with similarity theory", Forschung im Ingenieurwesen (Engineering Research), v.72 p.19-28, DOI: http://dx.doi.org/1007/s10010-007-0064-6
  • Çetin, B., Li, D. (2008). "Microfluidic continuous particle separation via AC-DEP with 3D electrodes", ASME International Mechanical Engineering Congress and Exposition (IMECE'08) p.217-222, DOI: http://proceedings.asmedigitalcollection.asme.org/proceeding.aspx?articleid=1641393
  • Çetin, B., Li, D. (2008). "Microfluidic Rotary Pump", Encyclopedia of Micro and Nanofluidics (1st Edition), Springer p.1188-1189, Full Text
  • Çetin, B., Li, D. (2008). "Temperature Gradient Generation and Control", Encyclopedia of Micro and Nanofluidics (1st Edition), Springer p.1993-1994, Full Text
  • Çetin, B., Li, D. (2008). "Methods for Pressure Measurements", Encyclopedia of Micro and Nanofluidics (1st Edition), Springer p.1743-1745, Full Text
  • Çetin, B., Li, D. (2008). "Magnetic Pumps", Encyclopedia of Micro and Nanofluidics (1st Edition), Springer p.1040-1043, Full Text
  • Çetin, B., Li, D. (2008). "Microfluidic Optical Devices", Encyclopedia of Micro and Nanofluidics (1st Edition), Springer p.1186-1187, Full Text
  • Çetin, B., Li, D. (2008). "Ultrasonic pumps", Encyclopedia of Micro and Nanofluidics (1st Edition), Springer p.2128-2129, Full Text

2007

    Journal Paper
  • Çakmakcı, M., A.G. Ulsoy (2007). "Design of Modular Controllers for Systems with Smart Networked Components", 4th Int. Conf. on Design and Production of Machines and Dies/Molds
  • Akay, A., Carcaterra, A., Lenti, F. (2007). "Pseudo-Damping in Undamped Plates and Shells", J. Acoust. Soc. Amer, v.122 p.804-813
  • Carcaterra, A., Akay, A. (2007). "Theoretical Foundations of Apparent-Damping Phenomena and Nearly Irreversible Energy Exchange in Linear Conservative Systems", Journal of the Acoustical Society of America, v.121 p.1971-1982
  • Ding, J., Tsaur, F., Lips, A., Akay, A. (2007). "Acoustical observation of bubble oscillations induced by bubble popping", Physical Review E, v.75
  • Yildiz, Y., Sabanovic, A., Abidi, K. (2007). "Sliding-Mode Neuro-Controller for Uncertain Systems", IEEE Transactions on Industrial Electronics, v.54(3) p.1676-1685
  • Karpat, Y., Özel, T. (2007). "Multi-Objective Optimization For Turning Processes Using Neural Network Modeling And Dynamic-Neighborhood Particle Swarm Optimization", International Journal of Advanced Manufacturing Technology, v.35 p.234
  • Özel, T., Karpat, Y. (2007). "Identification of Constitutive Material Model Parameters for High-Strain Rate Metal Cutting Conditions Using Evolutionary Computational Algorithms", Materials and Manufacturing Processes, v.22 p.659
  • Özel, T., Karpat, Y., Figueira, L., Davim, J. (2007). "Modeling of Surface Finish and Tool Wear in Hard Turning of AISI D2 Steel Using Ceramic Wiper Inserts", Journal of Materials Processing Technology, v.189 p.192
  • Temizer, İ., Zohdi, T.I. (2007). "A numerical method for homogenization in non-linear elasticity", Computational Mechanics, v.40(2) p.281-298, DOI: http://dx.doi.org/10.1007/s00466-006-0097-y
  • Temizer, İ., Wriggers, P. (2007). "An adaptive method for homogenization in orthotropic nonlinear elasticity", Computer Methods in Applied Mechanics and Engineering, v.196(35-36) p.3409-3423, DOI: http://dx.doi.org/10.1016/j.cma.2007.03.017
  • Yildiz, Y., Annaswamy, A., Yanakiev, D., Kolmanovsky, I. (2007). "Adaptive Idle Speed Control for Internal Combustion Engines", American Control Conference p.3700-3705
  • Bulut, B., Çetin, B., Yazıcıoğlu, A.G., Yuncu, H., Kakaç, S. (2007). "The analysis of the effect of axial conduction on single-phase convective heat transfer in microtubes", 16th National Conference on Thermal Sciences, Full Text
  • Çetin, B., Li, D. (2007). "Modeling and simulation of 2D, EOF in a slit channel with Joule heating effect", 16th National Conference on Thermal Sciences, Full Text

2006

    Journal Paper
  • Süer, S., Baytaroğlu, Ş. (2006). "Infrastructure for Scientific Metrology in Turkey", CAMET-JM
  • Çakmakcı, M., A.G. Ulsoy (2006). "Improving Component Swapping Modularity using Bi-directional Communication in Networked Control Systems", Proc. Int. Symposium on Flexible Automation
  • Carcaterra, A., Akay, A., Koc, I.M. (2006). "Near-irreversibility in a conservative linear structure with singularity points in its modal density", J. Acoust. Soc. Amer, v.119 p.2141-2149
  • Giannini, O., Akay, A., Massi, F. (2006). "Experimental analysis of brake squeal noise on a laboratory brake setup", J. Sound Vibration, v.292 p.1-20
  • Karpat, Y., Özel, T. (2006). "Predictive Analytical and Thermal Modeling of Orthogonal Cutting Process. Part I: Predictions of Tool Forces, Stresses and Temperature Distributions", ASME Journal of Manufacturing Science and Engineering, v.128 p.435
  • Karpat, Y., Özel, T. (2006). "Predictive Analytical and Thermal Modeling of Orthogonal Cutting Process. Part II: Effect of Tool Flank Wear on Tool Forces, Stresses and Temperature Distributions", ASME Journal of Manufacturing Science and Engineering, v.128 p.445
  • Çetin, B., Yuncu, H., Kakaç, S. (2006). "Gaseous flow in microconduits with viscous dissipation", Int. J. Transport Phenomena, v.8(4) p.297-315, Full Text

2005

    Journal Paper
  • Çakmakcı, M., A.G. Ulsoy (2005). "Bidirectional Communication Among ''Smart'' Components in a Networked Control System", Çakmakcı, M., A.G. Ulsoy, (2005)., Abstract
  • Koh, K., Griffin, J.H., Filippi, S., Akay, A. (2005). "Characterization of turbine blade friction dampers", J. Engineering for Gas Turbines and Power, v.127 p.856-862
  • Akay, A., Carcaterra, A., Xu, Z., Koc, I. (2005). "Experiment on vibration absorption using energy sinks", Journal of the Acoustical Society of America, v.118 p.3043-3049
  • Koc, I., Carcaterra, A., Xu, Z., Akay, A. (2005). "Energy Sinks for Vibration Reduction: Optimum Frequency Distribution", Journal of the Acoustical Society of America, v.118 p.3031-3042
  • Özel, T., Karpat, Y. (2005). "Predictive Modeling of Surface Roughness and Tool Wear in Hard Turning using Regression and Neural Networks", International Journal of Machine Tools and Manufacture, v.45 p.467
  • Temizer, İ., Zohdi, T.I. (2005). "Agglomeration and refragmentation in microscale granular flows", International Journal of Fracture, v.131(3) p.L37-L44, DOI: http://dx.doi.org/10.1007/s10704-005-2598-7
  • Çetin, B., Yuncu, H., Kakaç, S. (2005). "Single-phase convective heat transfer in microtubes", 15th National Conference on Thermal Sciences, Full Text

2004

    Journal Paper
  • Çınar, F., Turaman, Ö., Baytaroğlu, Ş. (2004). "Yeni nesil 4x4 Lastik Tekerli Zırhlı Araçlar", SAVTEK
  • Çınar, F., Turaman, Ö., Baytaroğlu, Ş. (2004). "NATO Şalterlerin Tasarım Kriterleri", SAVTEK
  • Çınar, F., Turaman, Ö., Baytaroğlu, Ş. (2004). "Lastik Tekerlekli Zırhlı Araçların Akustik ve Termal İzi", SAVTEK
  • Carcaterra, A., Akay, A. (2004). "Transient Energy Exchange Between a Primary Structure and a Set of Oscillators: Return Time and Apparent Damping", Journal of the Acoustical Society of America, v.115 p.683-696
  • Filippi, S., Akay, A., Gola, M. (2004). "Measurement of Tangential Contact Hysteresis During Microslip", ASME Journal of Tribology, v.126 p.482-489

2003

    Journal Paper
  • Akalp, M., Şen, D., Anlağan, Ö., Kılıç, S. (2003). "Development of a Web-Based Job-Shop Scheduling System", WESIC 2003, 4th Workshop on European Scientific and Industrial Collaboration
  • Başıbüyük, Y., Kılıc, S.E., Anlağan, Ö. (2003). "A Study on Quality Control System Implementation in a Distributed Manufacturing Environment", WESIC 2003 (4th Workshop on European Scientific and Industrial Collaboration) p.465-472
  • Baytaroğlu, Ş., Türkoğlu, H., Çınar, F. (2003). "Reduction of the Thermal Signature of Wheeled Armored Vehicle", NATO AVT 100 Symposium
  • Akay, A. (2003). "The renaissance engineer: Educating engineers in a post-9/11 world", European Journal of Engineering Education, v.28 p.145-150
  • Bayer, O., Çetin, B., Dirgin, E. (2003). "COP-Irreversibility relation in household refrigerators", 14th National Conference on Thermal Sciences, Full Text

2002

    Journal Paper
  • Karpenko, Y., Akay, A. (2002). "A numerical method for analysis of extended rough wavy surfaces in contact", ASME J. Tribology, v.124 p.668-679
  • Akay, A. (2002). "Acoustics of Friction", J. Acoust. Soc. Amer., v.111 p.1525-1548

2001

    Journal Paper
  • Karpenko, Y., Akay, A. (2001). "A numerical model of friction between rough surfaces", Tribology International, v.34 p.531-545

2000

    Journal Paper
  • Çakmakcı, M., Ulsoy, A.G. (2000). "Quantification of Coupling for Modular Design Problems", Japan-USA Symposium on Flexible Automation
  • Çelik, C., Akay, A. (2000). "Dissipation in solids: Thermal oscillations of atoms", J. Acoust. Soc. Amer, v.108(1) p.184-191

1999

    Journal Paper
  • Bengisu, M.T., Akay, A. (1999). "Stick-slip oscillations: Dynamics of friction and surface roughness", J. Acoust. Soc. Amer., v.105(1) p.194-205

1998

    Journal Paper
  • Tzou, K., Wickert, J.A., Akay, A. (1998). "In-plane vibration modes of arbitrarily thick disks", ASME J. Vibration and Acoustics, v.120 p.384-391
  • Akay, A., Xu, Z. (1998). "Experiments on acoustic streaming in a fluid layer between vibrating surfaces and amplitude-dependent damping of vibrations", J. Acoust Soc. Amer., v.103 p.865-871
  • Tzou, K., Wickert, J.A., Akay, A. (1998). "Frequency clusters in the spectrum of annular cylinders", J. Applied Mechanics, v.65(4) p.797-803

1997

    Journal Paper
  • Bengisu, M.T., Akay, A. (1997). "Relation of dry friction to surface roughness", ASME J. Tribology, v.119 p.18-25

1996

    Journal Paper
  • Rhee, J., Akay, A. (1996). "Dynamic response of a revolute joint with clearance", Mechanism and Machine Theory, v.31 p.121-134

1995

    Journal Paper
  • Baytaroğlu, Ş., Özbay, H., Fank, S. (1995). "Kuvvet Standardının Oluşturulması ve Sanayiye Transferi", I.Ulusal Ölçümbilim Kongresi
  • Tiftikçi, K., Baytaroğlu, Ş. (1995). "1m’ye Kadar Ölçme Bloğu Kalibrasyonu ve Sıcaklığın Ölçüm Sonuçları Üzerindeki Etkisi", I. Ulusal Ölçümbilim Kongresi
  • Baytaroğlu, Ş., Özbay, H., Fank, S. (1995). "Çekme Basma Test Makinalarında Kalibrasyonun Önemi", I. Ulusal Ölçümbilim Kongresi
  • Kang, J., Akay, A., Xu, Z. (1995). "Intertia effects on compressible squeeze films", ASME J. Vibrations and Acoustics, v.117 p.94-102

1994

    Journal Paper
  • Bengisu, M.T., Akay, A. (1994). "Stability of friction-induced vibrations in multi-degree-of-freedom systems", J. Sound and Vibration, v.171 p.557-570
  • Swayze, J., Akay, A. (1994). "Effects of system dynamics on friction-induced oscillations", J. Sound and Vibration, v.173 p.599-609
  • Gaunaurd, G.C., Akay, A. (1994). "Isolation of the 'spectrograms' and 'rosettes' of insonified sets of submerged, concentric, thin shells", ASME J. Vibration and Acoustics, v.116 p.573-577

1993

    Journal Paper
  • Akay, A., Ingard, K.U. (1993). "Radiation from bending waves in the presence of a flow boundary layer", ASME J. Vibration and Acoustics, v.115 p.411-416
  • Uras, H., Akay, A. (1993). "Mechanical engineering capstone design course", J. Mechanical Engineering Education, v.21 p.347-354
  • Akay, A., Sener, S., Gaunaurd, G.C. (1993). "Acoustic scattering from fluid-filled, concentric, submerged, cylindrical elastic shells", J. Acoustical Society of America, v.94 p.3277-3294

1992

    Journal Paper
  • Wu, X.F., Akay, A. (1992). "Sound radiation from vibrating bodies in motion", J. Acoust. Soc. Amer., v.91 p.2544-2555
  • Latcha, M., Akay, A. (1992). "Effects of viscous and thermal losses on radiation from an infinite plate", ASME J. Vibration and Acoustics, v.114 p.415-419
  • Akay, A. (1992). "Normal and angular motions at rough planar contacts during sliding with friction- Discussion", ASME J. Tribology, v.114 p.578

1991

    Journal Paper
  • Akay, A. (1991). "Scattering of sound from concentric cylindrical shells", J. Acoust. Soc. Amer., v.89 p.1572-1578
  • Onsay, T., Akay, A. (1991). "Vibration reduction of a flexible arm by time-optimal open-loop control", J. Sound and Vibration, v.147 p.283-300

1990

    Journal Paper
  • Akay, A. (1990). "Radiation from a finite array of simple sources", J. Acoust. Soc. Amer., v.87 p.1449-1454

1988

    Journal Paper
  • Ertan, H., Tohumcu, M. (1988). "A Method For Optimum Design of Switched Reluctance Motors", ICEM 88, International Conference on Electrical Machines
  • Tohumcu, M., Ertan, H. (1988). "Prediction of Performance of Switched Reluctance Motor For Design Purposes", ICEM 88, International Conference on Electrical Machines

1987

    Journal Paper
  • Ingrad, K.U., Akay, A. (1987). "Acoustic radiation from bending waves of a plate", J. Vibrations, Acoustics, Stress and Reliability in Design, v.109 p.75-81
  • Ingrad, K.U., Akay, A. (1987). "On the vibration damping of a plate by means of a viscous fluid layer", J. Vibration, Acoustics, Stress and Reliability in Design, v.109 p.178-184

1986

    Journal Paper
  • Bengisu, M.T., Hidayetoglu, T., Akay, A. (1986). "A theoretical and experimental investigation of contact loss in the clearances of a four-bar mechanism", J. Mechanism, Transmission, and Automation in Design, v.108 p.237-244
  • Latcha, M., Akay, A. (1986). "Application of the Helmholtz integral in acoustics", J. Vibration, Acoustics, Stress and Reliability in Design, v.108 p.447-453

1984

    Journal Paper
  • Akay, A., Tokunage, M., Latcha, M. (1984). "A theoretical analysis of transient sound radiation from a clamped circular plate", J. Applied Mechanics, v.51 p.41-47

1983

    Journal Paper
  • Akay, A., Bengisu, M.T., Latcha, M. (1983). "Transient acoustic radiation from impacted beam-like structures", J. Sound and Vibration, v.91 p.135-145
  • Akay, A., Latcha, M. (1983). "Sound radiation from an impact-excited clamped circular plate in an infinite baffle", J. Acoust. Soc. Amer, v.74 p.640-648

1982

    Journal Paper
  • Akay, A. (1982). "Mathematical modeling of transient vibration and acoustic radiation from impacted systems", J. Mathematical Modeling, v.3 p.535-541

1981

    Journal Paper
  • Arıkan, C., Tohumcu, M. (1981). "A Fully Transistorized Constant Torque D.C. Drive and Its Dynamical Analysis", 4th Power Electronics Conference p.275-285
  • Cook, R., Hamm, C.W., Akay, A. (1981). "Shock measurement with noncontacting fiber optic levers", J. Sound and Vibration, v.76 p.443-456
  • Salt, N., Konishi, T., Cook, R., Akay, A. (1981). "Comparison between the effects of continuous and impact noise on cochlear potentials of guinea pigs", J. Acoust. Soc. Amer., v.69 p.1746-1752

1978

    Journal Paper
  • Akay, A., T. H. Hodgson (1978). "Sound radiation from a accelerated or decelerated sphere", J. Acoust. Soc. Amer., v.63 p.313-318
  • Akay, A., T. H. Hodgson (1978). "Acoustic radiation from the elastic impact of a sphere with a slab", Applied Acoustics, v.11 p.285-304
  • Akay, A., E. Saibel (1978). "Fracture time of composites under tensile loading", J. Composite Materials, v.12 p.262-274
  • Akay, A. (1978). "A review of impact noise", J. Acoust. Soc. Amer, v.64 p.977-987

1976

    Journal Paper
  • Akay, A., E. Saibel (1976). "Fracture of polymeric materials under tensile loads", Wear, v.37 p.377-381